Hey Clay, cheat trick. Use a UniFi network with WAP is "Meshing" mode. Use an AP in the area the data is needed and place an AP with meshing on, connect it to local network first, adopt and configure. Now air-gap it and connect the data-PoE port to a local PoE switch that also feeds the device. The meshing will hook up and allows data to go both directions.
I have a customer who wants to have the live picture of one of his unifi protect cameras combined with some local advertising informations on a big TV screen (digital signage). - First i found the "Unifi Viewport", but this device can only show protect cameras, no still images what i need. - And then there is this Unifi Display Cast, which can only handle media, but no protect camera live view. It's ridiculous. - If unifi let me drop in some dummy camera views/still images which i can arrange in a view around the one real camera that would be also a solution to use "Viewport" for that purpose.
There arre some upcoming software updates to the Cast line. Not sure if they will do what you want (i dont know what they are) but i would keep my eyes out there...
7 months on and still no transitions. Any word on if UniFi will add some of those missing features? Would really like to have transitions and display zones. We've worked around no transitions by uploading an mp4 with announcement slides and transitions baked in and just looping that rather than uploading individual slides
I sure hope this product matures, I just today finally caught one in stock and placed my order, but I really do need some transitions at the very minimum, I currently have (17)85"TV's, and (4)86"TV's in one room of a club, plus many more in VIP rooms, at desks etc, I'm using (3) eight input/ eight output HDBaseT video switchers, so I'm able to have 24 inputs, but realistically I split each input to each of the 3 units so it's truly more like 8. I wish I had known the boss wanted this many TV's, I would have gotten a big modular switcher and it would have been so much easier all around. Appreciate your effort, will look through the channel for others on the subject.
What are supported HDMI resolutions and refresh rates ? This is important and missing from products comparison. And I cannot find it in datasheet also.
it's still in EA. They're just now adding the ability to do portrait mode so I expect this to be good in a year or two if you're managing a large number of displays. If you're just doing 1 display this is overkill. I've had them hang as well where it goes to blank screen after running for an extended period of time.
They need to at LEAST add RSS and HTML support before I'll ditch what I am using. Another nice to have would be on-controller content creation/templates - if I need to quickly drum up an announcement I like the ability to do it without having to open photoshop
Do you have the ability to set the amount of time each “slide” s displayed before it switches to the next? What about displaying a live webpage for a weather station that may be at that location?
![[DIY] Ubiquiti Unifi Access Point Setup in a Home!](http://i.ytimg.com/vi/x6Lza_tVf5M/mqdefault.jpg)
What do YOU think about the Display Cast?
Hey Clay, cheat trick. Use a UniFi network with WAP is "Meshing" mode. Use an AP in the area the data is needed and place an AP with meshing on, connect it to local network first, adopt and configure. Now air-gap it and connect the data-PoE port to a local PoE switch that also feeds the device. The meshing will hook up and allows data to go both directions.
Nice!
I have a customer who wants to have the live picture of one of his unifi protect cameras combined with some local advertising informations on a big TV screen (digital signage). - First i found the "Unifi Viewport", but this device can only show protect cameras, no still images what i need. - And then there is this Unifi Display Cast, which can only handle media, but no protect camera live view. It's ridiculous. - If unifi let me drop in some dummy camera views/still images which i can arrange in a view around the one real camera that would be also a solution to use "Viewport" for that purpose.
There arre some upcoming software updates to the Cast line. Not sure if they will do what you want (i dont know what they are) but i would keep my eyes out there...
7 months on and still no transitions. Any word on if UniFi will add some of those missing features? Would really like to have transitions and display zones. We've worked around no transitions by uploading an mp4 with announcement slides and transitions baked in and just looping that rather than uploading individual slides
Development has been slow for sure!
I sure hope this product matures, I just today finally caught one in stock and placed my order, but I really do need some transitions at the very minimum, I currently have (17)85"TV's, and (4)86"TV's in one room of a club, plus many more in VIP rooms, at desks etc, I'm using (3) eight input/ eight output HDBaseT video switchers, so I'm able to have 24 inputs, but realistically I split each input to each of the 3 units so it's truly more like 8. I wish I had known the boss wanted this many TV's, I would have gotten a big modular switcher and it would have been so much easier all around. Appreciate your effort, will look through the channel for others on the subject.
Yeah a matrix switcher might have been the better way to go.. hopefully there's some more development on this and it comes something pretty cool
It would be awesome if you would update your video to include Display Cast Pro. I would love to know how it compares.
@@BB-xb3mz I have one in hand to test...
Thera are POE shields for the rpi
They should have built the device with built-in WiFi. Major oversight.
Agreed. It would have made it much more versatile
What are supported HDMI resolutions and refresh rates ? This is important and missing from products comparison. And I cannot find it in datasheet also.
Will this show wide video if I group 2 or more devices? something like 3840 x 1080 video?
Not as of now.
can you host your own connect controller? like you can host the unifi network controller?
it's still in EA. They're just now adding the ability to do portrait mode so I expect this to be good in a year or two if you're managing a large number of displays. If you're just doing 1 display this is overkill. I've had them hang as well where it goes to blank screen after running for an extended period of time.
Yeah, hoping for development but Ubiqiti is always a little slow, if they ever do...
They need to at LEAST add RSS and HTML support before I'll ditch what I am using. Another nice to have would be on-controller content creation/templates - if I need to quickly drum up an announcement I like the ability to do it without having to open photoshop
100%. You nailed it.. the hardware is nice and could totally handle it.. they have the resources, but will they develop?....
Do you have the ability to set the amount of time each “slide” s displayed before it switches to the next?
What about displaying a live webpage for a weather station that may be at that location?
You can set the time but cannot do an html webpage...
Shouldn't be to hard to connect the Display Cast to the server from a remote location, just like the Wi-Fi APs.
correct, just not simple and definitely above what average consumer could/should do themselves.
Another great video!
Thanks so much for the kind feedback!
"not super mature"
it's network kit not cheese🧀
lol
annoying background music
Duly noted!