Our machine is a standard spec machine specified by DMG Mori Australia. It has the 15,000RPM SK40 BIG-PLUS spindle. The BIG-PLUS technology allows the use of standard SK40 tools holders, or the BIG-PLUS holders which have the 'Face Contact' contact with the spindle, in the same way as the HSK tool system. Essentially this is trying to give the same sort of advantages as HSK for surface finish, tool life etc. If we had the 20,000RPM spindle then DMG Mori Aus would specify the HSKA-63 spindle. This is an all round machine for us. But as we do more specific work, if we purchased another machine, and needed the higher speeds, we would definitely be looking at HSK.
Seimens is pretty awful but once you get a hang of Heidenhain it's really hard to go back to anything else. 3+2 programming is a breeze with the conventional and when running large 5 axis g code programs its real easy to skip though and start wherever you want, We had a really good post from Gibbscam. Again run away from Seimens, you'll rip your hair out.
The Heidenhain control is great!
This is such a great video. Beautiful shop, beautiful machine, and a beautiful part. Thanks for sharing with everyone.
This generation of dmu50 is soooo good. I have a 2nd and 3rd gen.
When I saw windows and nice floors, I knew it wasn't a US based shop.
Congratulations!
I see a new family member is at home! Enjoy!
0:45 "yeah just lower it on to the skates while half my torso is under the machine..."
High tech machine dmg Mori😍😍😍
Amazing
is the tool changer going the wrong way?
why not HSK holders?
Our machine is a standard spec machine specified by DMG Mori Australia. It has the 15,000RPM SK40 BIG-PLUS spindle.
The BIG-PLUS technology allows the use of standard SK40 tools holders, or the BIG-PLUS holders which have the 'Face Contact' contact with the spindle, in the same way as the HSK tool system. Essentially this is trying to give the same sort of advantages as HSK for surface finish, tool life etc.
If we had the 20,000RPM spindle then DMG Mori Aus would specify the HSKA-63 spindle.
This is an all round machine for us. But as we do more specific work, if we purchased another machine, and needed the higher speeds, we would definitely be looking at HSK.
Sehr gut
How much is the price tag
Хорошая работа .
I'm amazed how in second 32, the crane operator lifts unnecessarily the machine more than 1.5m above the ground
Guessing you didnt see the black box it was lifting it over aye.
Everyone in AU wears tow truck shirts from what I can tell.
Hello
İ think u changed tool holders with haimer.
Ich genoss
Danke schön!
You need USD 500,000-.
table too small on 50
Dmg controls are not quite user friendly
Seimens is pretty awful but once you get a hang of Heidenhain it's really hard to go back to anything else. 3+2 programming is a breeze with the conventional and when running large 5 axis g code programs its real easy to skip though and start wherever you want, We had a really good post from Gibbscam. Again run away from Seimens, you'll rip your hair out.
@@darrylm7588 I've used both and prefer Siemens. The best control is the one you feel most comfortable and competent with.
@@muddasarakram419Siemens is garbage
@@darrylm7588 3 + 2 and 5 axis are identical programs. There is no difference. The code is the same.
@@motoflyte Not really.