Been watching your videos for a while now. Can't wait till I have enough money for a stage 3 & go to your shop from central Florida. I wouldn't trust any other shop.
Thank you Sir. I have an 800.4 and I'm adding an 800.1 nextt weekend. I'll be using option 2 because I'm already committed to the Rockford Fosgate amp install kit. I couldn't have done it without you. Thanks for all your help
Beautiful install without amp plate. Nice & simple. Would please show or reference a video installing on a 07 batwing (flhtc) using the same equipment?
Dang, was just about to search for this! 🙌🏼🙌🏼 Long time viewer! Just picked up a 2022 RG and was gonna be doing 2/SD evo 8.4 & (fairing) Diamond Mo75t/mp654 and lids mp694, RF DSR1. Alittle lost on what wiring kits I’m gonna need, this video addresses my amp placement
That's cool. I bought 6.5 Memphis pro audio components. I found spots to clean mount everything but, the pro tweeters in the road glide. How do you mount a pro horn tweeter in a road glide, can it be done with a factory headlight
Awesome work as always. Could you tell me if you guys still use the RF dsr1 and if yourl have an issues with connection via Bluetooth or settings not being able to save?
We stopped using the dsr1 2 years ago We use the hki mini and cicada dsp now . We had too many dsr1 getting water damage . The hki is much smaller and easier to protect from getting wet . Update the firmware on the dsr1 That should fix your Bluetooth issues . rftech.custhelp.com/app/answers/detail/a_id/1324/~/2017-dsr1-signal-processor---software-%26-owners-manual
Have you ad any issues with the evox when slight finger pressure is applied to the top the amp cracks static super hard as if there is no insulation between the case and the electronics?
Great vid! This is exactly what I was looking for since I will use the same amps and DSP. One question though, your harness for the mini HKI provides the remote wire to it, but how do you set up the remote wires to the amps? From DSP -> 1st amp -> 2nd amp ?
I usually take the wife's cutting board when I need to make a mounting plate for something. Don't get me wrong I also usually get stuck having to replace it too. How she hasn't learned to try and hide them yet I don't know. The cutting board is even good for cutting speak spacers.
I have a set of st 25 neos under where the radio is. Do you think there would still be enough space to fit an 800 sound digital amp under the radio still??
We don’t run blocks in the faring We use the distribution block in the side cover and run 2 powers and 2 grounds to the faring. I like a fuse on each line .
@@ryandrake4748 message me on Facebook I’ll give you my cell phone number. We are crazy busy and don’t really get to answer the phone . We get hundreds of phone calls a day and thousands of emails .
@@ibrheemmikbel8131 We have a complete test rig setup We can plug the radio , amp and dsp and set them before we go to the bike . We ship a lot of prewired complete kits so we have to be able to set them up off the bike .
Been watching your videos for a while now. Can't wait till I have enough money for a stage 3 & go to your shop from central Florida. I wouldn't trust any other shop.
Thank you Sir. I have an 800.4 and I'm adding an 800.1 nextt weekend. I'll be using option 2 because I'm already committed to the Rockford Fosgate amp install kit. I couldn't have done it without you. Thanks for all your help
As always nicely done, but more important thank you for sharing!!
Beautiful install without amp plate. Nice & simple. Would please show or reference a video installing on a 07 batwing (flhtc) using the same equipment?
Best video yet. Thank you Sir.
Man, there's a lot of room in those fairings. I don't know if I've worked on a Road Glide newer than 14. Good info.
Impressive Carlos!
Dang, was just about to search for this! 🙌🏼🙌🏼 Long time viewer! Just picked up a 2022 RG and was gonna be doing 2/SD evo 8.4 & (fairing) Diamond Mo75t/mp654 and lids mp694, RF DSR1. Alittle lost on what wiring kits I’m gonna need, this video addresses my amp placement
Hi Carlos I love your work but I have a question how do you mount two Evo's in a 2013 cvo roadglide?
That's cool. I bought 6.5 Memphis pro audio components. I found spots to clean mount everything but, the pro tweeters in the road glide. How do you mount a pro horn tweeter in a road glide, can it be done with a factory headlight
Mojo pro Memphis
Under the radio
Google road glide tweeter mount
Great video. How are you making connections between the amp and speakers in the pod’s and the tour pack pods.
Our t harness takes care of that
It makes it plug and play with the factory pod harness . Uses the factory plugs No cutting at all
Awesome work as always. Could you tell me if you guys still use the RF dsr1 and if yourl have an issues with connection via Bluetooth or settings not being able to save?
We stopped using the dsr1 2 years ago
We use the hki mini and cicada dsp now .
We had too many dsr1 getting water damage .
The hki is much smaller and easier to protect from getting wet .
Update the firmware on the dsr1
That should fix your Bluetooth issues .
rftech.custhelp.com/app/answers/detail/a_id/1324/~/2017-dsr1-signal-processor---software-%26-owners-manual
Very Nice👊
Awesome video bro, thanks I learned a lot..👍🏽
Good video. The stock radio is lacking & will upgrade this summer.
2006 road king with 1500 watts. What battery would you recommend? Would you recommend 2?
Braille g30h lithium
You will only need 1
@@NVSAUDIO awesome. Thank you.
Will the stator need to upgrade from stock 17 road glide. Awesome channel
Have you ad any issues with the evox when slight finger pressure is applied to the top the amp cracks static super hard as if there is no insulation between the case and the electronics?
Broken rca board
Get the amp warrantied
The new ones don’t have that issue
@@NVSAUDIO Thanks!!
You think a stinger svt30l battery would power those amps?
Yes
But I like the Braille b3121 better
Nevermind. I found the video. Thanks
Have you done this setup with the baja headlights on 21 road glide special
What about the EVOX power sports version? I hear they are just a little larger because of a larger heat sink.
They won’t fit . The new power sports 800.4 will fit but they are not out yet .
Wait m
Confused. Will it fit or not fit?
Evops 800.4 that is. My local stereo shop have em in stock
@@NVSAUDIO will it fit or not fit m
Confused. Pls advise. 800.4 evops
@@junarriola5155 won’t fit
Great vid! This is exactly what I was looking for since I will use the same amps and DSP. One question though, your harness for the mini HKI provides the remote wire to it, but how do you set up the remote wires to the amps? From DSP -> 1st amp -> 2nd amp ?
Do you use a DD1 on the amps. To fine tune the gains.
What's your opinion on the Brazilian model evo 4.0?
It’s not the same quality as the evox
We texted them
The 4.0 make
Less power and have more noise
Have you ever made a comparison video of the 2? I think a lot of people would like to know the difference
Which dsp do you prefer the hki or the rockford?
Hki
@@NVSAUDIO may I ask why.you seemed to like the rockford a while back?
I usually take the wife's cutting board when I need to make a mounting plate for something. Don't get me wrong I also usually get stuck having to replace it too. How she hasn't learned to try and hide them yet I don't know. The cutting board is even good for cutting speak spacers.
I have a set of st 25 neos under where the radio is. Do you think there would still be enough space to fit an 800 sound digital amp under the radio still??
Where are the distribution blocks?
We don’t run blocks in the faring
We use the distribution block in the side cover and run 2 powers and 2 grounds to the faring.
I like a fuse on each line .
@@NVSAUDIO sounds awesome bro. I tried to give your shop a call yesterday seemed the phone was off! Lol
@@ryandrake4748 message me on Facebook
I’ll give you my cell phone number.
We are crazy busy and don’t really get to answer the phone .
We get hundreds of phone calls a day and thousands of emails .
@@NVSAUDIO I did send you message (Hunter Drake)
Do you set the gains on amps or leave them down and just use the gain on dsp or do you put the amps at a certain level
We set the amps on the bench before we install them , the rest of the adjustments are done in the dsp .
@@NVSAUDIO how do you set the gains on the bench
@@ibrheemmikbel8131
We have a complete test rig setup
We can plug the radio , amp and dsp and set them before we go to the bike .
We ship a lot of prewired complete kits so we have to be able to set them up off the bike .
@@NVSAUDIO that’s nice so the gains on the amps get set and then on the dsp is the gain left to zero or do you gain down depending on it sounds 👍👍
@@ibrheemmikbel8131 I always gain down in the dsp after and then adjust up as needed in the final
Tune
Hey What set-up do you recommend for a 2014 Road King CVO??
Great content 👌
How must something like this would cost me 2023 road glide limited