Focus XR5 / ST225 / RS Injector change Step by step by OEM Denied Performance
Вставка
- Опубліковано 3 жов 2024
- How to replace fuel injectors on a Focus XR5 / RS mk2 / ST225 or Mondeo XR5 Turbo.
Step by step
Genuine Bosch 440cc injectors available from www.focusonperf...
Step by step by OEM Denied Performance
Amazing video. Watched while changing my injectors to 440cc in a focus st225. Appreciate your hard work and helpful detailed content.
glad to have been of help! :)
All these videos are helping so much mate
Thanks mate, and much appreciated, especially you taking the time to show us on your day off. Lot's of stuff learned. 👍👍👍👍
I like your videos.Thanks for your time and effort.
Please make a video on cam shaft installation of xr5
"Ya just gunna munch up a valve" Best statement Ever ;--))))
8:02 this small plastic part has no o rings which I believe can leak fuel? Unless I’m mistaken
Nice video. I guessed i was missing the o-ring as when i turned the ignition on i had fuel blow out everywhere from the inlet pipe to the fuel rail oops. Is it just an o-ring that fits in the fuel rail?
Excellent straightforward video, thanks. I'm looking to change the gasket on the lower inlet manifold, do I need to remove the fuel rail/injectors too or does the manifold just unbolt with it attached?
nah you can leave the fuel rail attached mate. Just unbolt the fuel line from the side of the cylinder head. If you look at the engine lifting eye down below there is a stud that holds it to the cylinder head, there is a P clamp held to the stud with an 8mm bolt. Remove that and just disconnect the fuel line further up where the flexi section attaches to the steel line that runs up from the underside of the car and you'll be good to go
Goodevening. I have baught last year 5 iniectors bosch 650 cc by ND TUNING but now not work good because the petrol came into cilindre when car is off. Where i can buy new iniectors on ebay? Thanks.
Wanna find out about the fuel line retainer clip can I get a photo of how the clip looks like please
put 6M5G 9B307 AA into google images :)
What symptoms do you get if these are starting to go bad.ive got random splutter like misfire.changed map.boost solenoid. Rs plugs.new coil packs. And still feels like a mini misfire when driving at random times. Any ideas before I buy a new maf sensor. Cheers
When upgrading the injectors do they not need to be coded in to the ecu
no coding is required (that is usually only with Diesel engines) but you do need to be running a tune that requires the size injector that you install as the tune will be scaled for that particular size.
Good morning. I did not understand the last part. when I have already reassembled everything, do I have to turn the car on and off several times to have the petrol loaded in the injectors and then check the breather valve again?
Thank you
the last bit is to purge the air out of the system. The fuel system on these cars is return-less. Switch the ignition on, then off, then on again then depress the valve to release the air.
Is it true that you should change the o-rings / sealings for the injectors? If i saw it correctly the injectors come with mounted o-rings .. but maybe i missed it. Thanks advance!
new injectors normally come with new O rings already fitted to them. If they haven't, unless originals are damaged or shrunken you'd be fine to re-use them onto your new injectors
"its my day off" 🙂
Do you only get these for a stage 4 tune? I've done the CAI and am getting incorrect air/fuel ratio but I want to correct it. Can I get a tune with factory injectors?
if you're on stock tune and all you've done is a CAI but the AFR isnt right then there's a mechanical issue with the car. I wouldn't suggest tuning to try to correct - fix the issue instead or it will become an issue when you are tuning
I have stage 1+. Can i put in RS injectors for better performance?
Or do i need a new remap?
You'll need a remap to scale the injectors correctly. The ECU can pull some fuel out.... but only so much so you'll end up with over fuelling which is very bad for the engine.
What reference for oem injector xr5 225?
what do you mean by reference?
@@OEMDeniedPerformance sorry my english is bad i speack french. What N° is injector for xr5 225 by bosch? Thanks
@@billydessibourg4263 Ford part number is 6M5G9F593AB, Bosch part number should be 0280158096
Do you have to configure them in the ecu
not configure like you do when you replace injectors on a diesel no. But you MUST be using them with a tune that requires them.
goodmorning. I wanted to know if i have to remove the petrol pressure before intervening and if during the intervention petrol comes out or not.
thanks
Yes you need to release the pressure from the fuel rail from the adapter valve as shown at
2:00 in the video, a small amount of fuel will come out of the rail
ok thanks a lot
Hey Jamie I was wondering, the stage 3 tune is it 270hp to the wheels
flywheel, because the vehicles are euro manufacturers quote flywheel power and torque
@@OEMDeniedPerformance Hi mate.
Your the best.
Buying many of your products that I can't fault :D
Looking the maps 2/3/4 with the exhaust and mods etc on the hub dyno.
I would have thought the engine was in the car ?
If on flywheel what parasitic drain what do you think 15% ?
@@1breematt Using a Dynapack hub dyno worked out that the TCF was 1.120. Did this by running a stock XR5 and altering the TCF till reading matched what stock output is. Crushed a few peoples dreams that thought they had 300+hp because just took the word of a tuner but then didnt with that TCF entered.