Check out the awesome new HeyGears Reflex RS printer here, and get $50 off! store.heygears.com/referral/rs05 Launch discount offer ends: October 4, 2024, 12:00 AM (PDT)
To get rid of seam-lines: Take a note from gundam models! Make it an actual seam-line, a groove. Then make the large flat connecting surface slightly recessed. That way the shrinkage will be hidden in the recessed hole, and the outer seam will look like the edge of armor that we can panel line and drybrush/edge highlight! This will also let it print much better even on printers that aren´t perfectly calibrated.
Another piece of advice for 3D print designers: consider how the model will be supported for printing. While you can slather every surface with fine detail, support points will obliterate any detail they go through. Multipart models with plain joining surfaces are better in my opinion since you can stick the supports on those and not lose anything.
Since the "table top time is in trouble'" video.... you guys seem like youve had a real new spark of life to the channel! Youve been making some really good and different videos! Im very optimistic for you guys! Keep up the good work my dudes
Love your content, this is my first comment in my UA-cam history and I’m over fifty. Hope this helps your engagement scores. Keep up the fight to survive.
Its crazy. Yesterday I commented on a persons Facebook comment about how most channels that do terrain crafting from scratch are dying out on UA-cam because 3D printing is becoming more and more accessible. Your channel came up in the conversation. I wake up today and BAM!! ..... a 3D printing could save our channel video pops up. Pretty much confirming the trend I have been witnessing over the last few years on this platform. Just like how the number of miniature painter channels have exploded over the last few years. Everything is becoming cheaper for the average consumer. Best of luck!!!
I am gonna make sure to watch all your video's now! I really want you guys to be able to keep going! I am (Un)patiently waiting for the New Lucivera episode!
As a space bears backer, I'm still holding out hope for your Chaos Dino dudes. I really hope this venture helps keep the lights on, you guys are my fave creators in this warhammery space
I’ve always been a huge proponent of 3D printing. In fact I commented on one of your videos a little while back stating that I preferred using a 3D printer to buying physical minis and was met with a pointed response. The way 3D printers have evolved makes them a really valid option for building armies and with so many different 3D model creators giving us so many great designs it’s really a no brainer.
Glad you got the HeyGears sponsorship. I saw Fauxhammer have his paid advert video and Once in a six sided dice video as well, and needed TTT to get some of THAT SWEET SWEET MONEY!
Hullo TTT Team! I am truly glad that you seem to have turned a corner to keeping your channel going! I am not as sure that I am going to be following the move to 3D printing. It might be just the thing that saves you, but I truly cannot afford the huge expense as well as the learning curve for this new way of creating mini’s to paint or play with. I am still working on the kit that I got from Neil over on Real Terrain Hobbies! I wish you and all of your followers the best as you explore the new realms of creating your own mini’s with the 3D printer boom!
You know what? I am genuinely glad I discovered and subbed to your channel after your dark time (after MajorKill video). Your Vids are a blast and I enjoy watching the craft, love and support flowing into it! I don't play tabletop, I played games years ago, and read a lot years ago.......But you scratch an itch that could have been and I live vicariously through you! So a big thank you!
Nice to see tht TtT will go one, you are one of my favorite hobby channels. Tips for the models: - before removing the supports, put the model into hot tap water for a few seconds. The supports will go of easy and leave almost no support marks - For the connection part, maybe add some panels which lay over the "connection line", so they hide part of it and break up the straight line downwards. - maybe add pre-done cutouts for magnets, puppetswear has it on some models and it's amazing! Also one thing I really hate at tank models is this "one big body to print", I prefer having sub-parts (top, side, bottom, like in model kits). Why? faster to print (especially if you manage to make them be able to lay flat on the print bed), if there is a print error you don't waste so much resin, easier to print (less supports etc.) and easier to customize). As a bonus the model is lighter (even if you hollow the "block) and you have space for some LED tech^^. Maybe something to consider. :)
the 20,000 leagues under the sea concept look awesome!! I love the space bears but 20,000 leagues under the sea is one of my favourite books so looking forward to support the kickstarter
For that flatbed tank seam-line - i would take inspiration from flatbed trucks make a visible gap, add some bolting in the interior of the bed to make it seem like the bed is interchangeable with different parts.
I did a Space Bears Audio Drama. Wanted to hint at other factions but didn't know if you had any plans. Had some characters refer to Squids. Might do a story with the Divers and have Squids be a term the bears refer to them as. Or maybe the Divers and control Squids. Definitely looking at the other factions list for story ideas.
Nice video, I really enjoy seeing some behind the scenes design and manufacturing. I'm slowly trying to get my own game and miniatures up and running as a bit of a part time business, so its incredibly helpful seeing some of the challenges that come with turning personal hobby into a product. ❤
If possible, I'd recommend a couple of options for the snowmobile. Have the steering portion adjustable so that it can be posed in dramatic skids or jumps. Maybe a spare out stretched arm that could have the rider leaning to the side to swipe with club or chainsword as they run down foes.
Wanted to drop in a comment - this is an interesting pivot and my fingers are crossed for y'all! All the designs look really cool (I'm partial to the rockabilly one, not something I've seen a lot of before). Also just wanted to let you know I really enjoyed last episode, it looked like y'all were having a blast. And very happy to see Murray in the studio again this time around!
I do hope you guys continue to find alternative ways to fund yourselves so that your UA-cam videos can be purely for fun and entertainment (for yourselves as well as us!), and not have to be so tailored to making something you hope will please the algorithm. It’s nice to see your passion un-stifled!
The space bear development scene has been a lot of fun to watch. I have yet to have the opportunity to responsibily support, but im happy to be a late supporter soon! I love the idea of physical minis being sent as a rewqrd for future kickstarters, especially with the submechaniphobia guild (what are they actually called? Haha.) Id be getting them regardless, but having secured high quality print of them? Thatll certainly cover for my eventual paint job! Yall are doing great things, im glad you guys have learned so much through all of this!
I'm loving the space bears they look amazing, but one little nit pick thing for me personally is the track for the snowmobile bike, it looks very thin I understand it is meant to be a replacement for a bike but a track that narrow I feel would just dig into the snow and get it stuck and maybe put some kind of support strut even on one side of the back tire to look like it is supporting and driving it. Again this is a personal opinion and as a whole I love the range and can't wait to see more cool mini's and projects from you guys. :)
A fun use of your test prints where all is said and done would be to put together boxes of them and challenge other creators to make something new kit bashing them.
Second what other people have said. The trick to part gaps with resin is to design around them. Know how, roughly, you'll need to slice the thing from the beginning and design the vehicle/figure such that there are design elements that hide the joining and inevitable mismatch.
I really enjoy stuff like this myself as a printy boi 😅 when it comes to stuff like vehicles lots of small light supports like these are much better than a bigger supports just get more pitting that xan happen with bigger supports. Looks good guys 💪🏻💪🏻
@Dave or Murray, I’m currently getting into painting minifigs for DnD specifically, but I enjoy watching your painting content of Warhammer figs as well. However, most of the content only provides highlights of the painting process. Would it be interesting for the channel to post the full process of painting figures? You are painting it anyways, so might as well post the full process as extra videos to boost the channel?
I said this a couple of vids ago, would be awesome for them to be explaining in a longer form why the are doing a certain thing or how best to approach a detail etc. Without necessary adding to much time filming or editing. i dont need flash vid, a more casual convo with paint would be nice.
@@TabletopTime that’s crazy, the mini painting is some of my favorite videos. Maybe once things become more stable you can do more of them. Or even do a stream or make mini painting videos a patreon thing. I’m rooting for y’all either way!!!
Love seeing the Space Bears progress and they look awesome. Esepcially the snow mobile. But an STL only thing just isn't somthing I could support as I can't 3D print. If you ever sell physical minis. Hell yeah! I'll throw money at you!
Awesome video! Space bears look amazing! I would love to 3d print, just being able to afford one, is my problem. I really really hope that the 3d printing it helps support the channel, Just keep going with it, and the new consistent thumbnails are i think working!
After your “in trouble” video, I thought I would support you guys as you are in the same state as me, buy buying some bits and bobs from your shop but $59 postage on a $60 order…doubling the price, then no reply to my email, killed that. Glad you have a sponsor but maybe work on the other stuff as well.
That Space Bears bike looks awesome. The ski concept would go good with Space Wolves also🤔. The flying machine😁 is also looking promising. Do you have a size for it yet? Keep up the great work. Murray keep the puns coming buddy they were great.
Couple of questions for y’all. When you guys do the full release for the Space Bears, will you guys release a lore book? Also, will you guys release printed minis in sets or anything like that? And one last question, when you’re done with the Space Bears, will you guys release Samurai Tau? Because I have a new found love for the Tau.
If you guys got partners to print some of your new projects, like Only Games for on demand printing, or Wargames Atlantic for a plastic release, I'd be really interested in what you have coming. I don't have a 3D printer, and I have no plans to buy one for a long time, so if projects like the space bears could be available officially in resin or plastic via a partner, that'd open things up for more hobbyists like myself to support you!
I like the ski-bikes as I could incorporate them into my Space Wolves but without a pricing index and because I do not own a 3d printer might be looking at actual built models
So glad I have taken up 3d printing... instead of a massive pile of grey plastic that I'll never get to painting ... I have a massive pile of STLs on my hard drive that I'll never get to printing.... but they take up much less room!!
So i think you guys should focus on unique kill teams ! People can use them for kill team. You can launch lots of variants and proxies and people can use the models gor squads or main characters for their main armies and even other games like Necromunda etc ! KILL Teams !!!! Kill teams !!! 🎉❤
So. Space Bears. Some thoughts and things that need to be done. Variation. The WereBears are mono pose. This was bad 1998, and it is way worse now. Need to have more poses and more variation. The Bear mounts are two. And most of us have 18-20 guys on them. Also mono posed models. Full filling the promises. Heavy weapons for instance, for the makwa and kodiaks. We need more variations. You promised choices, and we got some but need more. Champions, not just the specialists. Maybe some details to add to our different units to be able to make our lords and battle leaders stand out. More flair. Having the really nice additions to add to our tanks or other models to make it able to use the models we have bought to a single army. Would be so nice. I love some of the models. Some look like crap, some are too cute to fit the theme of the rest. An overarching similar design idea would be nice.
Sorry, printer noob question but: are we actually supposed to touch the prints pre-uv-microwave? It looks like you washed them but didn't harden them yet, is that safe? I never dare to touch them before they've been through the sun room 😅
Soooooo there’s a person that designed deep sea diver style models like that saw them on myminifactory. Hopefully they aren’t in the same vain because that would be awkward hahaha. Keep up all the good work my dudes
Unrelated to this video but I was watching your video about Marcher and I was wondering what brushes those were that you were using for dry brushing? Thank you.
Those nautical models look good. Personally I hope they don't come out to bulky (at least the basic troop style models) and I'd much prefer if their weapons weren't overly scifi. Something that could fit in maybe both a more historical setting but could pass for some type of las gun or other weapons. I could definitely find a place for them in my Trench Crusade Heretics army.
I think you'll be happy then - My personal favorite is the harpoon gun, theres also whaling spears... Even the 'rifle' we erred away from energy weapon. Autoguns exist in 40k too
I would love a new printer, i like my anycubic, but i have not been able to print much of the things i wanted to print on it 😂😭 I cant fit the fricking bear mount on it, so its just way to small 🫣 Ill have to save up for a new printer ❤
I love The how do's and why do videos, they usually always get a click. I'm just not heavy into Warhammer. Dnd or other pop culture and gaming material is a winner for me. I hope you all succeed regardless
Do you plan to make location contract for printers business to print your minis for others. I cant afford to print by myself but like to buy print from small business.
Ok, I have a question: why is the build platform on a big-ass, expensive printer completely flat, causing pooling of resin on top of it, when every cheap one has a top that slants in all directions, with zero resin pooling on top of it? That seems like a pretty obvious design oopsie, honestly.
Heygears is truly weird when it comes to their printers. They insist on their resin, in their printers, with their slicer, with their supports. Why not be weird as hell when it comes to printer design too?
@@benstaffordson7163 sure, sure. It's just that this is just a bother to work around and a waste of resin. The last one is "understandable" when they sell their own resin, but the first one is just not good for anyone.
@@TheSmueyIf you remove the build plate straight away, that's more wasted resin. Forcing you to buy more. I have very low expectations of that company, so rather than just stupid design I assume it's malicious, anti-consumer nonsense.
Check out the awesome new HeyGears Reflex RS printer here, and get $50 off! store.heygears.com/referral/rs05
Launch discount offer ends: October 4, 2024, 12:00 AM (PDT)
To get rid of seam-lines: Take a note from gundam models! Make it an actual seam-line, a groove. Then make the large flat connecting surface slightly recessed. That way the shrinkage will be hidden in the recessed hole, and the outer seam will look like the edge of armor that we can panel line and drybrush/edge highlight!
This will also let it print much better even on printers that aren´t perfectly calibrated.
Another piece of advice for 3D print designers: consider how the model will be supported for printing. While you can slather every surface with fine detail, support points will obliterate any detail they go through. Multipart models with plain joining surfaces are better in my opinion since you can stick the supports on those and not lose anything.
Since the "table top time is in trouble'" video.... you guys seem like youve had a real new spark of life to the channel! Youve been making some really good and different videos! Im very optimistic for you guys! Keep up the good work my dudes
Guys, persevere and persist!
You can do it!
Y'kno, before I even watch this, I want to say that's a really good thumbnail, I don't care for most of the pulled faces, but this one is amazing.
The title sucks.
I agree, it's a good thumbnail.
Absolutely this!
"Murray's cheeky lil paint break" should be the name of a series on the channel
I'd watch it
Love your content, this is my first comment in my UA-cam history and I’m over fifty. Hope this helps your engagement scores. Keep up the fight to survive.
Aww thankyou, appreciated
Its crazy. Yesterday I commented on a persons Facebook comment about how most channels that do terrain crafting from scratch are dying out on UA-cam because 3D printing is becoming more and more accessible. Your channel came up in the conversation. I wake up today and BAM!! ..... a 3D printing could save our channel video pops up. Pretty much confirming the trend I have been witnessing over the last few years on this platform. Just like how the number of miniature painter channels have exploded over the last few years. Everything is becoming cheaper for the average consumer. Best of luck!!!
I am gonna make sure to watch all your video's now! I really want you guys to be able to keep going! I am (Un)patiently waiting for the New Lucivera episode!
As a space bears backer, I'm still holding out hope for your Chaos Dino dudes. I really hope this venture helps keep the lights on, you guys are my fave creators in this warhammery space
Ooh, those deep-sea guys in the old diving suits look really cool.
I’ve always been a huge proponent of 3D printing. In fact I commented on one of your videos a little while back stating that I preferred using a 3D printer to buying physical minis and was met with a pointed response. The way 3D printers have evolved makes them a really valid option for building armies and with so many different 3D model creators giving us so many great designs it’s really a no brainer.
Glad you got the HeyGears sponsorship. I saw Fauxhammer have his paid advert video and Once in a six sided dice video as well, and needed TTT to get some of THAT SWEET SWEET MONEY!
I never got paid. How do I get paid!? I want money!
Hullo TTT Team! I am truly glad that you seem to have turned a corner to keeping your channel going! I am not as sure that I am going to be following the move to 3D printing. It might be just the thing that saves you, but I truly cannot afford the huge expense as well as the learning curve for this new way of creating mini’s to paint or play with. I am still working on the kit that I got from Neil over on Real Terrain Hobbies! I wish you and all of your followers the best as you explore the new realms of creating your own mini’s with the 3D printer boom!
You know what? I am genuinely glad I discovered and subbed to your channel after your dark time (after MajorKill video). Your Vids are a blast and I enjoy watching the craft, love and support flowing into it! I don't play tabletop, I played games years ago, and read a lot years ago.......But you scratch an itch that could have been and I live vicariously through you! So a big thank you!
That's awesome to hear thankyou
It is really great to see the Zorp crew doing their own thing. You have so much drive and talent! I wish you massive success.
Happy to see you guys are branching out, I’d hate to see this channel die.
Nice to see tht TtT will go one, you are one of my favorite hobby channels.
Tips for the models:
- before removing the supports, put the model into hot tap water for a few seconds. The supports will go of easy and leave almost no support marks
- For the connection part, maybe add some panels which lay over the "connection line", so they hide part of it and break up the straight line downwards.
- maybe add pre-done cutouts for magnets, puppetswear has it on some models and it's amazing!
Also one thing I really hate at tank models is this "one big body to print", I prefer having sub-parts (top, side, bottom, like in model kits). Why? faster to print (especially if you manage to make them be able to lay flat on the print bed), if there is a print error you don't waste so much resin, easier to print (less supports etc.) and easier to customize). As a bonus the model is lighter (even if you hollow the "block) and you have space for some LED tech^^. Maybe something to consider. :)
I LOVE how the aircraft is a VTOL model and makes so much sense for mountain operations!
the 20,000 leagues under the sea concept look awesome!! I love the space bears but 20,000 leagues under the sea is one of my favourite books so looking forward to support the kickstarter
For that flatbed tank seam-line - i would take inspiration from flatbed trucks make a visible gap, add some bolting in the interior of the bed to make it seem like the bed is interchangeable with different parts.
I did a Space Bears Audio Drama. Wanted to hint at other factions but didn't know if you had any plans.
Had some characters refer to Squids. Might do a story with the Divers and have Squids be a term the bears refer to them as. Or maybe the Divers and control Squids.
Definitely looking at the other factions list for story ideas.
Nice video, I really enjoy seeing some behind the scenes design and manufacturing. I'm slowly trying to get my own game and miniatures up and running as a bit of a part time business, so its incredibly helpful seeing some of the challenges that come with turning personal hobby into a product. ❤
Glad to hear it was interesting!
If possible, I'd recommend a couple of options for the snowmobile. Have the steering portion adjustable so that it can be posed in dramatic skids or jumps. Maybe a spare out stretched arm that could have the rider leaning to the side to swipe with club or chainsword as they run down foes.
im so glad there is a chance for this channel to come back, lets help them!
Dude, I NEVER understand Murray's painting style, but holy hell I love what it looks like. I wish I could mimic it, but hot damn.
Fantastic concept art. Love Murray's Cheeky Lil Paint Break❤
You both look so happy right now. Love the models 😊😊😊
Them nautilus guard are freaking awesome!
I love how the space bears tanks/vehicles look like absolute units! Battle fridges in the best way!! Also… that new Kickstarter in the works 🥵
These look awesome! Nice to see some of the backend of the sculpting process. These results definitely make me miss resin printing.
Wanted to drop in a comment - this is an interesting pivot and my fingers are crossed for y'all! All the designs look really cool (I'm partial to the rockabilly one, not something I've seen a lot of before).
Also just wanted to let you know I really enjoyed last episode, it looked like y'all were having a blast. And very happy to see Murray in the studio again this time around!
So nice when the supports pop off easy.
I do hope you guys continue to find alternative ways to fund yourselves so that your UA-cam videos can be purely for fun and entertainment (for yourselves as well as us!), and not have to be so tailored to making something you hope will please the algorithm. It’s nice to see your passion un-stifled!
I wish the best for you guys! I can see you're definitely trying to make the channel work. And I think this might be a way to do it. Good job!
Interesting view behind the scenes of developing minis for 3D printing.
The space bear development scene has been a lot of fun to watch. I have yet to have the opportunity to responsibily support, but im happy to be a late supporter soon!
I love the idea of physical minis being sent as a rewqrd for future kickstarters, especially with the submechaniphobia guild (what are they actually called? Haha.) Id be getting them regardless, but having secured high quality print of them? Thatll certainly cover for my eventual paint job!
Yall are doing great things, im glad you guys have learned so much through all of this!
That new faction looks phenomenal and those prints were so crispy!
Would really love to see you guys do a full 2000 pt painted army of all the KS space bear minis
I'm loving the space bears they look amazing, but one little nit pick thing for me personally is the track for the snowmobile bike, it looks very thin I understand it is meant to be a replacement for a bike but a track that narrow I feel would just dig into the snow and get it stuck and maybe put some kind of support strut even on one side of the back tire to look like it is supporting and driving it. Again this is a personal opinion and as a whole I love the range and can't wait to see more cool mini's and projects from you guys. :)
A fun use of your test prints where all is said and done would be to put together boxes of them and challenge other creators to make something new kit bashing them.
Been planing for a printer for ages but life always throws a wrench in the mix. This one looks nice!
Second what other people have said. The trick to part gaps with resin is to design around them. Know how, roughly, you'll need to slice the thing from the beginning and design the vehicle/figure such that there are design elements that hide the joining and inevitable mismatch.
I really enjoy stuff like this myself as a printy boi 😅 when it comes to stuff like vehicles lots of small light supports like these are much better than a bigger supports just get more pitting that xan happen with bigger supports. Looks good guys 💪🏻💪🏻
@Dave or Murray, I’m currently getting into painting minifigs for DnD specifically, but I enjoy watching your painting content of Warhammer figs as well. However, most of the content only provides highlights of the painting process.
Would it be interesting for the channel to post the full process of painting figures? You are painting it anyways, so might as well post the full process as extra videos to boost the channel?
I said this a couple of vids ago, would be awesome for them to be explaining in a longer form why the are doing a certain thing or how best to approach a detail etc. Without necessary adding to much time filming or editing. i dont need flash vid, a more casual convo with paint would be nice.
The reality is in our experience over the years, painting tutorial style videos just get the least views
@@TabletopTime that's a shame.
@@TabletopTime that’s crazy, the mini painting is some of my favorite videos. Maybe once things become more stable you can do more of them. Or even do a stream or make mini painting videos a patreon thing. I’m rooting for y’all either way!!!
@@TabletopTime was just thinking of ways to add to the channel without too much extra hassle.
Shame thi, would love some long form Murray
Have you guys ever thought of doing a collab with Mid Winter Minis? You two are my favourite and I always hoped for it... just a friendly suggestion 😂
That faction looks awesome.
Those are some super clean sculpts and prints. Very nicely done.
Interesting perspective on 3D printing! It's definitely its own beast with its own idiosyncrasies to learn.
This makes me want jet ski outriders for my pirate Space Marines
Love seeing the Space Bears progress and they look awesome. Esepcially the snow mobile. But an STL only thing just isn't somthing I could support as I can't 3D print. If you ever sell physical minis. Hell yeah! I'll throw money at you!
When Dave was holding the tank. It looked like it had some warp on the bottom
Awesome video! Space bears look amazing! I would love to 3d print, just being able to afford one, is my problem. I really really hope that the 3d printing it helps support the channel, Just keep going with it, and the new consistent thumbnails are i think working!
After your “in trouble” video, I thought I would support you guys as you are in the same state as me, buy buying some bits and bobs from your shop but $59 postage on a $60 order…doubling the price, then no reply to my email, killed that. Glad you have a sponsor but maybe work on the other stuff as well.
That Space Bears bike looks awesome. The ski concept would go good with Space Wolves also🤔. The flying machine😁 is also looking promising. Do you have a size for it yet? Keep up the great work. Murray keep the puns coming buddy they were great.
We will work out the size as the test prints run but it's meant to be a storm raven size roughly
@@TabletopTime sweet. You all are awesome.
Couple of questions for y’all. When you guys do the full release for the Space Bears, will you guys release a lore book? Also, will you guys release printed minis in sets or anything like that? And one last question, when you’re done with the Space Bears, will you guys release Samurai Tau? Because I have a new found love for the Tau.
can't wait to see the full 20k under the sea army, hope it does become the 3rd pillar
so glad you found a way to get back to black. I wish you the best.
3D printers have certainly changed my life. 6 weeks ago I'd never had one, now I have 5 and a couple hundred thousand more views haha.
would love to 3d print.... just need more time to paint models.. maybe I'll invest in a small one. love your videos.
If you guys got partners to print some of your new projects, like Only Games for on demand printing, or Wargames Atlantic for a plastic release, I'd be really interested in what you have coming.
I don't have a 3D printer, and I have no plans to buy one for a long time, so if projects like the space bears could be available officially in resin or plastic via a partner, that'd open things up for more hobbyists like myself to support you!
I really do like your videos, you really pour your heart into what you do which is inspiring.
Very nice! Love the idea of expanding out the business
Loving the sketch style on the new factions, reminding me slightly of Jamie Hewletts stuff, in a good way :)
New model range looks very cool!
Ooh, I backed the Space Bears and this new project looks awesome!
Love the new concepts
I like the snowcat spacebear tank!
Keep up the good work! And good to diversify your income streams - plus love the product and mini development videos 💪
I like the ski-bikes as I could incorporate them into my Space Wolves but without a pricing index and because I do not own a 3d printer might be looking at actual built models
The HeyGears looks like a great add to the print farm.
Those concept art pieces look really similar to the dredge marines by Mezgike!
Dave: Warhammer Fantasy Battle.
Wait what!!!!
So glad I have taken up 3d printing... instead of a massive pile of grey plastic that I'll never get to painting ... I have a massive pile of STLs on my hard drive that I'll never get to printing.... but they take up much less room!!
Hey! Seeing the primark 3D print, what about the statue hall of all the primarks you mentioned in this video? Is it still a plan in the making? 🙏
@tabletop time you should 100% remove supports pre cure when in hot water and it will reduce/ remove any pock marks from supports.
Also if you cure too long your fit wont be as good.
So i think you guys should focus on unique kill teams ! People can use them for kill team. You can launch lots of variants and proxies and people can use the models gor squads or main characters for their main armies and even other games like Necromunda etc ! KILL Teams !!!! Kill teams !!! 🎉❤
“The depth guard”
So.
Space Bears.
Some thoughts and things that need to be done.
Variation.
The WereBears are mono pose. This was bad 1998, and it is way worse now. Need to have more poses and more variation.
The Bear mounts are two. And most of us have 18-20 guys on them. Also mono posed models.
Full filling the promises.
Heavy weapons for instance, for the makwa and kodiaks. We need more variations. You promised choices, and we got some but need more.
Champions, not just the specialists. Maybe some details to add to our different units to be able to make our lords and battle leaders stand out.
More flair.
Having the really nice additions to add to our tanks or other models to make it able to use the models we have bought to a single army.
Would be so nice.
I love some of the models. Some look like crap, some are too cute to fit the theme of the rest.
An overarching similar design idea would be nice.
Sorry, printer noob question but: are we actually supposed to touch the prints pre-uv-microwave? It looks like you washed them but didn't harden them yet, is that safe? I never dare to touch them before they've been through the sun room 😅
Use a heat gun on the supports or even a blow dryer to easily rip it and win
Awesome models.
Murrey was good and easy to understand as always!
Where are the shelves from in the background @ 0:37 please?
Just wondering, will your factions be One Page Rules compatible?
realllly excited about those deep sea dudes!
Soooooo there’s a person that designed deep sea diver style models like that saw them on myminifactory. Hopefully they aren’t in the same vain because that would be awkward hahaha. Keep up all the good work my dudes
Love you guys
So keen for those deep sea guys.
Unrelated to this video but I was watching your video about Marcher and I was wondering what brushes those were that you were using for dry brushing? Thank you.
Artist Opus drybrushes - We swear by them but they are $$$
should totally get some rules going for ravaged stars and opr.
Those nautical models look good. Personally I hope they don't come out to bulky (at least the basic troop style models) and I'd much prefer if their weapons weren't overly scifi. Something that could fit in maybe both a more historical setting but could pass for some type of las gun or other weapons. I could definitely find a place for them in my Trench Crusade Heretics army.
I think you'll be happy then - My personal favorite is the harpoon gun, theres also whaling spears... Even the 'rifle' we erred away from energy weapon. Autoguns exist in 40k too
@@TabletopTime dope!
Please do a colab army build with Victoria Miniatures for their new Space Aussies and Kiwis
I would love a new printer, i like my anycubic, but i have not been able to print much of the things i wanted to print on it 😂😭
I cant fit the fricking bear mount on it, so its just way to small 🫣
Ill have to save up for a new printer ❤
I love The how do's and why do videos, they usually always get a click. I'm just not heavy into Warhammer. Dnd or other pop culture and gaming material is a winner for me. I hope you all succeed regardless
Do you plan to make location contract for printers business to print your minis for others.
I cant afford to print by myself but like to buy print from small business.
The deep sea dudes look like they’d go well with Mezgike’s ones
Ok, I have a question: why is the build platform on a big-ass, expensive printer completely flat, causing pooling of resin on top of it, when every cheap one has a top that slants in all directions, with zero resin pooling on top of it? That seems like a pretty obvious design oopsie, honestly.
Heygears is truly weird when it comes to their printers.
They insist on their resin, in their printers, with their slicer, with their supports.
Why not be weird as hell when it comes to printer design too?
@@benstaffordson7163 sure, sure. It's just that this is just a bother to work around and a waste of resin. The last one is "understandable" when they sell their own resin, but the first one is just not good for anyone.
@@TheSmueyIf you remove the build plate straight away, that's more wasted resin. Forcing you to buy more.
I have very low expectations of that company, so rather than just stupid design I assume it's malicious, anti-consumer nonsense.
Great video!
TTT vs. Miscast!