Let me try this way instead of replying to the posts addressed to me. I re-wired all the connections with a crimping tool and ferrules for each wire in the main controller and the solar charge controller and properly sized eyelets for the connections to the battery. The original installation battery wiring was stripped about 2-3 inches and wrapped around the screw type lugs on the battery and tightened with a nut, no washers. I used the smallest ferrules that would fit the wires into the charge controller and main control unit after being stripped, twisted and trimmed to the correct length. The ferrule kit I used came from Amazon called 'VANOW Crimping Tool Set'. I purchased it for another project but it has since been used for other stuff.
My system was installed just shy of 2 years ago. I've had some issues with the gate not opening, closing and some otherwise unusual behavior. The system is set up with a 12v deep cycle battery, a large solar panel and a solar charge controller. It works, but every issue I've had with this setup can be directly traced back to the installer wiring and bad connections at the battery, the charge controller and the main Ghost control unit. Stripped and twisted wiring at every location doesn't last. There needs to be terminal ends where screw connections and wire-to-wire connections are made in addition to wire ferrules anywhere a screw clamp connection is made, which are all of the solar controller connections and most all of the Ghost controller connections. The bare wire connections do not last as they lose connection and voltage over time.
Thank you for your feedback. I will make sure to pass this on to our Engineering team. We are always looking for feedback which in turn helps us keep improving upon our products, along with coming up with new innovative ones.
Thanks. System does a good job, easy to troubleshoot and fix and each of the 4 issues I've had can be traced directly back to terminal connections from the original installation.
@gtgarage I've also had mine 2.5 years and started having the same issues. Same setup. I will look into reconnecting the wiring, thanks. I also had it professionally installed. I totally agree that for something this vital (access gate to property) they should've had all terminal connections! How did you fix the issues?
We do not have a video for this installation. Full installation instructions are available in the manual that was provided with your product purchase and on our website under the "Support" tab. The TDS2 manual can be found here: cdn.shopify.com/s/files/1/0255/2332/2989/files/TDS2_2021_Manual_bw.pdf?v=1614873308 Control Box Installation info is available for Pull to Open gates beginning on page 23 and for Push to Open gates beginning on page 44.
Let me try this way instead of replying to the posts addressed to me. I re-wired all the connections with a crimping tool and ferrules for each wire in the main controller and the solar charge controller and properly sized eyelets for the connections to the battery. The original installation battery wiring was stripped about 2-3 inches and wrapped around the screw type lugs on the battery and tightened with a nut, no washers. I used the smallest ferrules that would fit the wires into the charge controller and main control unit after being stripped, twisted and trimmed to the correct length. The ferrule kit I used came from Amazon called 'VANOW Crimping Tool Set'. I purchased it for another project but it has since been used for other stuff.
My system was installed just shy of 2 years ago. I've had some issues with the gate not opening, closing and some otherwise unusual behavior. The system is set up with a 12v deep cycle battery, a large solar panel and a solar charge controller. It works, but every issue I've had with this setup can be directly traced back to the installer wiring and bad connections at the battery, the charge controller and the main Ghost control unit. Stripped and twisted wiring at every location doesn't last. There needs to be terminal ends where screw connections and wire-to-wire connections are made in addition to wire ferrules anywhere a screw clamp connection is made, which are all of the solar controller connections and most all of the Ghost controller connections. The bare wire connections do not last as they lose connection and voltage over time.
Thank you for your feedback. I will make sure to pass this on to our Engineering team. We are always looking for feedback which in turn helps us keep improving upon our products, along with coming up with new innovative ones.
Thanks. System does a good job, easy to troubleshoot and fix and each of the 4 issues I've had can be traced directly back to terminal connections from the original installation.
@gtgarage I've also had mine 2.5 years and started having the same issues. Same setup. I will look into reconnecting the wiring, thanks. I also had it professionally installed. I totally agree that for something this vital (access gate to property) they should've had all terminal connections! How did you fix the issues?
@@gtgaragedid you go out and buy specific set of terminal ends for screw connections?
@@gtgarageand what size or type or wire ferrules did you use? Thanks for any and all info
i plan on mounting the Control Box on the fence mesh itself, i have 2"x4" 12 gauged metal wire horse fencing. How do you recommend mounting it?
Hi Eric, Sorry for the late response on this one but you can always zip tie it to the chain link fence.
Where is the video for the double gate (TDS2) control box connection????
We do not have a video for this installation. Full installation instructions are available in the manual that was provided with your product purchase and on our website under the "Support" tab. The TDS2 manual can be found here: cdn.shopify.com/s/files/1/0255/2332/2989/files/TDS2_2021_Manual_bw.pdf?v=1614873308
Control Box Installation info is available for Pull to Open gates beginning on page 23 and for Push to Open gates beginning on page 44.
Damn the technician could of atleast leveled the boxes and also suggested wire management techniques
Call me