Missed the part about the barrel needing to slide all the way out before replacing the pin. Tried twice. Couldn't figure why the slide wouldn't go all the way. Hope that helps someone. Great tutorial for a first timer! Gun was jamming at the range after ever round. Embarrassing. Now it's smooth as glass.
Thank you very much for the video. I am new to semi-automatic pistols. I have always had revolvers. This video is the easiest to understand that I have seen so far. It is well lit, understandable, and easy to follow. I really appreciate it.
Just cleaned mine today. I like to clean all the parts with solvent every time, then oil. That spring and pin can be a challenge since they are small. Thanks for posting.
Thank you, I come back and watch this video on occasion when I find myself fighting with the slide assembly. It likes to not freely slide back into position, and I need to see it again.
Hint: Put the take-down pin in before you put the slide back on. Just true up the pin to the inside of the frame then put the slide on and the pin will pop right on.
I've fired several rounds through this pisto and have never had that happen. Was the gun cleaned and the pin checked before firing? Could have just been popped out a little originally. I'd say once you have it snapped in, test it to see if it continues and if so definitely contact Ruger. I'm sure they will have no problem fixing it.
Just used my Ruger LCP for the first time today, not sure I should clean it after every use but I definitely needed to learn how, your video was excellent, I learned a lot. Thanks. Might be a stupid question, is there any type of maintenance required for the magazines besides lubricating it with oil as in the video? Maybe since it was new you didnt need to do much.
My son gave me this gun for my 60th birthday. I'm afraid I may not be able to clean it as it looks pretty hard to put it back together. Are there people who you can hire to clean guns? He lives in another town or I'd just have him do it. I just don't think I'm strong enough or have the dexterity to put the spring and pin back on. I'm going to be headed to the range and taking my concealed handgun classes so I'll be needing it cleaned every week for a while.
If you feel you aren't able to clean it due to the spring and pin, there should be gunsmiths and such locally that would be able to clean it. Actually, most gun ranges have the service available as well as most gun shops. I hope this helps, and good luck with your class!
Reneè Hill - DON'T WORRY ABOUT "STRENGTH". I am 74 and had my LCP for about 10 years - I clean it after every use at the range, YES, it might seem hard at first, but you will be amazed at the ease of its cleaning if you 'grab it hard, and pull it back. The 'springs' inside won't bother you, they are really quite easy, once you do it a few times. It's a nice little gun, and have been carrying it in my pocket ever since I got it - it's small, light and comforting. Just remember to keep your finger OFF the trigger!
Great vid.... U left out the most important part of the process. U better run the slide action and trigger a few times to Make sure it's functioning. Lol
Nice video... but (excepting at the end) you keep putting your finger on or near the trigger.... especially during safety check in the start. That's very dangerous to do. You will be surprised to know how many times people have accidentally shot like that.
2:20 "This gun is brand new, I haven't shot it yet." 3 minutes later 5:23 "The barrel's really not too dirty." Ladies and gentlemen, my mind has been blown.
Mike Bircher Just because a gun is new, doesn't mean it can't come from the factory with residue, shavings, or thick grease that you need to clean before first shooting
lol I've never, ever, and never ever WILL see a firearm whose barrel is packed with grease and shavings. Maybe a little dust from shipping and manufacturing. Firing pin spring? Sure. Slide rails? maybe. Barrel? nope. Maybe a little lube.
@@truthtone58 Sure, a single shot is performed, maybe 2 or 3. That wouldn't leave a barrel filthy unless it was the 1860's and they were test firing a black powder revolver.
Just fired mine today for the first time. Thanks for the video! It will definitely help me.
Missed the part about the barrel needing to slide all the way out before replacing the pin. Tried twice. Couldn't figure why the slide wouldn't go all the way. Hope that helps someone.
Great tutorial for a first timer! Gun was jamming at the range after ever round. Embarrassing. Now it's smooth as glass.
Really nice "to the point" cleaning tutorial for the Ruger LCP .380 - Thank you Josh, I will clean my new LCP tonight after work...
just picked up a 380 LCP, that's what I needed to see, thanks for the good video.
Thank you very much for the video. I am new to semi-automatic pistols. I have always had revolvers. This video is the easiest to understand that I have seen so far. It is well lit, understandable, and easy to follow. I really appreciate it.
Just cleaned mine today. I like to clean all the parts with solvent every time, then oil. That spring and pin can be a challenge since they are small. Thanks for posting.
Thanks for a clear and concise video. I bought a new .380 and I haven't yet cleaned it but I will now that I have easy instructions.
Great video, I just got my 380 and I needed a video tutorial for cleaning my gun, thanks.
Ruben Garces very
Perfect maintenance video. Used it to clean my new LCP purchase. Thank you
Thank you, Just got mine yesterday and the instructions were ok but its better to actually see how its done.
Thank you, I come back and watch this video on occasion when I find myself fighting with the slide assembly. It likes to not freely slide back into position, and I need to see it again.
Thank you. Great video. I was nervous out cleaning it but you made it easy. Thanks again!!
Thanks for posting this video. It made cleaning my Christmas easier.
Hint: Put the take-down pin in before you put the slide back on. Just true up the pin to the inside of the frame then put the slide on and the pin will pop right on.
Thank you for sharing this video!
You made it so easy. Thanks a bunch!
Use a trim bar. Typically used to disassemble interior dashboard parts etc.
Simple. Well done, thanks.
Great vid, did help. Thanks
I've fired several rounds through this pisto and have never had that happen. Was the gun cleaned and the pin checked before firing? Could have just been popped out a little originally. I'd say once you have it snapped in, test it to see if it continues and if so definitely contact Ruger. I'm sure they will have no problem fixing it.
I got the lcp and the bodyguard 380 with crimson laser. I have a 357 for last resort
This is/was a helpful video. Thanks
Dude I have that very same gun cleaning kit. Great video
Just did it. Easy Peasy thanks !
Just used my Ruger LCP for the first time today, not sure I should clean it after every use but I definitely needed to learn how, your video was excellent, I learned a lot. Thanks. Might be a stupid question, is there any type of maintenance required for the magazines besides lubricating it with oil as in the video? Maybe since it was new you didnt need to do much.
I've shot about 400 rounds through my factory mag. No maintenance. I did apply light oil as OP suggested.
My son gave me this gun for my 60th birthday. I'm afraid I may not be able to clean it as it looks pretty hard to put it back together. Are there people who you can hire to clean guns? He lives in another town or I'd just have him do it. I just don't think I'm strong enough or have the dexterity to put the spring and pin back on. I'm going to be headed to the range and taking my concealed handgun classes so I'll be needing it cleaned every week for a while.
If you feel you aren't able to clean it due to the spring and pin, there should be gunsmiths and such locally that would be able to clean it. Actually, most gun ranges have the service available as well as most gun shops. I hope this helps, and good luck with your class!
Reneè Hill - DON'T WORRY ABOUT "STRENGTH". I am 74 and had my LCP for about 10 years - I clean it after every use at the range, YES, it might seem hard at first, but you will be amazed at the ease of its cleaning if you 'grab it hard, and pull it back. The 'springs' inside won't bother you, they are really quite easy, once you do it a few times. It's a nice little gun, and have been carrying it in my pocket ever since I got it - it's small, light and comforting. Just remember to keep your finger OFF the trigger!
Thank you sir. I'm typically a Glock man and that pin totally threw me off.
Very helpful and through.
Thanks for the help! 👍
Great vid.... U left out the most important part of the process.
U better run the slide action and trigger a few times to Make sure it's functioning. Lol
I hate that disconnect pin in never wants to go over and in past that little bar
Nice video. Just got mine and would much rather watch a video than read the instructions lol...
YOU RULE!!! thank-you kind sir.
Thanks!
Great video I just watched it step-by-step to clean my brand new LCP.
Thank you!
Do u use balitstol....
Thanks
My slide won’t go back. It stops1/4” short
new guns come with a thicker oil or paste for breaking in a new firearm.
Nice video... but (excepting at the end) you keep putting your finger on or near the trigger.... especially during safety check in the start. That's very dangerous to do. You will be surprised to know how many times people have accidentally shot like that.
Might want to remove your finger from the trigger guard when operating the slide(or any time you aren't planning on firing).
Nice except you shouldnt be using the same toothbrush with oil and what not to use on the insides of the polymer
Don’t be too excited
Cut out the kit part and just get into it. If the guy doesnt know the kit and how to clean, he wont be here..Good Vid....
The buddy wants to chat with you, can you,
2:20 "This gun is brand new, I haven't shot it yet." 3 minutes later 5:23 "The barrel's really not too dirty."
Ladies and gentlemen, my mind has been blown.
Mike Bircher Just because a gun is new, doesn't mean it can't come from the factory with residue, shavings, or thick grease that you need to clean before first shooting
lol I've never, ever, and never ever WILL see a firearm whose barrel is packed with grease and shavings. Maybe a little dust from shipping and manufacturing. Firing pin spring? Sure. Slide rails? maybe. Barrel? nope. Maybe a little lube.
@@SnazzyZubloids they always shoot the gun at the factory. You get an empty cartridge to prove it. It's always a good idea to clean a gun first.
@@truthtone58 Sure, a single shot is performed, maybe 2 or 3. That wouldn't leave a barrel filthy unless it was the 1860's and they were test firing a black powder revolver.
@@truthtone58 I've never gotten an empty case with any new gun I've bought.. including the LCP..
Dosent even know how to properly break down the weapon. Rem oil to clean 🤣 Keep your day job.
I cringed when you did a chamber check with your finger on the trigger...
you need to learn how to edit your videos so I would actually watch the whole thing