GTHaus Musa Meisterschaft Exhaust Install Part 2 - The Exhaust Hardware // Lexus IS500
Вставка
- Опубліковано 3 жов 2024
- Finally the video of the GT Haus Exhaust install on my 2022 IS500 Launch Edition
gthaus.com/pro...
There will be 2 to 3 parts to this as its pretty involved and i want to document as much as I could of my well planned and executed installation. I am pretty happy with the way things turned out.
Part 1 is installing and figuring out routing of the Vacuum line, Solenoid and the Controller box.
Part 2 is the Actually exhaust hardware install and testing out the full system and install harder bushing mounts to help with the exhaust from moving.
SP Tools 66750B SHIELDED OXYGEN & AIR FUEL SENSOR SOCKET 22mm : amzn.to/48S96oT
The Exhaust bushings mentioned in the video Torque Solution Exhaust Hanger Mount: 12mm (1.25"/31.75mm Hole to Hole), you can get them on Amazon: amzn.to/3GnL9Ll
Part 3 is the extra credit part, where I install hardware button on the Dashboard, a hint of OEM+ this aftermarket exhaust. The buttons, I had custom made and they are wired with two Relays to a Homelink module stuffed behind the Dashboard.
==================================================
Don't forget to subscribe, comment, share and like. goo.gl/cTk6m1
More of my Lexus IS500 Launch Edition Build thread located on ClubLexus Forums:
www.clublexus....
find me on IG: @typerod
/ typerod
(Disclaimer: occasionally some links above may be affiliate links, which means I receive a small commission on a purchase without additional cost to you, if you buy something through my links.)
Check out my small webstore of products I build for the community:
specone.bigcar... - Авто та транспорт
Meisterschaft FTW! 🏁
That open valve cold start was 🔥🔥🔥!
OAN, I can really appreciate the time you took to run the vacuum lines properly! Looks very clean! ✊🏿
Appreciate the love
that thing sounds so mean... thanks for the video
it sure does sound mean!
Sounds nice , good luck with the smog check though :D
don't live in a commie state lmao
Rodney what is the metal cylinder around the o2 sensor? Is it to prevent people working on their cars?
Did you unplug the O2 sensor before unscrewing it? I tried to, but the wires start twisting and I'm afraid of breaking them
I did not unplug the o2 sensor before unscrewing it. I let it twist and make sure to twist it about the same amount when installing it onto the new midpipe.
Any worries with carb compliance? Only reason is I've been looking at this exhaust and I'm in CA lol any input is appreciated!
🫣
When you purchased your exhaust system did it come with the mid-pipe or was that sold additional? Also any dash codes pop up?
Purchased separately as an addition. No dash code if o2 sensor is installed and gaskets don't leak
Any drone?
My personal opinion. This exhaust was insanely loud open or closed valved when I first installed it. Now that it has broken in with some miles on it, or my ears have grown accustomed to it, it' pretty quiet with the valves closed and a beast when its open but no drone on freeway in my opinion
Hi Rodney. I'm considering getting this exhaust, but I don't want any drone. Is that an issue you have experienced?
no drone to me even with valves open on the freeway
@@specONE nice
Where did you mount the black box and get power from? Thanks
My way was complicated, I recommend going to the cigarette lighter port so it will only work with the car on and won't drain your system. I believe I show where I mounted the box in a different video
What adapters do you have for the jack stands thays on the pinch weld?
To be honest, I don't remember where I got them from at this point. But they don't really work too well for the pinch weld. The pinch weld just cuts the part it rest on in half
Is that socket size is 7/8 for O2 sensor? I went to the muffler shop and they don’t have that specific size. That’s why i ending up going home sad because they didn’t install my exhaust.
And do you have any link for alittle bit cheap socket like you can recommend? Thankyou
That's disappointing a muffler shop didn't have the correct o2 sensor removal tool. It's a standard Toyota size.
Here's example of one:
ARES 70039-3/8-Inch Drive by 7/8-Inch (22mm) Offset Oxygen Sensor Socket amzn.to/3VTEflm
He has one tool to remove the O2 sensor but he wants to cut the hitshiled for O2 sensor and told him not to do it like that.
Thankyou so much for the link! Help me a lot!
@@specONEthis socket falls short. Doesn’t reach. DO NOT BUY.
If U it's a Calif O2 Sensor,Diff.from Stk.May have to get it f from Dealer Parts.I had a 2001Tundra Calif.Sensor Truck,Bitch to Remove.
I’ve been thinking of getting the gthaus for my is500
How is it
It sounds amazing
Did you get it tuned ??
No tune, just stock ECU mapping
Any check engine light?
No check engine lights!
It sound like a ford gt
Can you sell me your stock exhaust?
Sorry I have no plans of selling the stock muffler system.
How is It with cops ? Being in gaylafornia ?
Did you use the same gaskets and the hardware from the stock one or do they come with the gthouse order?
I reused gaskets. GThaus didn't provide any