I totally agree with your assessment. The Pfeil tools (IMO)are a bit over priced. The Two Cherries are wonderful! The Flexcut come from the factory ready to carve...I have a couple members in our carving club who have purchased the Beavercraft & the Schaaf tools...Nice introductory level tools. Good steel but, will need a fair amount of sharpening/tuning to make them scary sharp & ready to carve...Thank you for a great video. Let's hope more people give wood carving a try...It's great for lowering blood pressure, fighting ADHD and makes you more attractive to the 'opposite' sex...I mean, c'mon...Who doesn't like someone who is creative and plays with surgically sharp tools? (OK, I might have embellished that last part just a wee bit...Merry Christmas to all. And, to all a good night
I love beaver craft the price and quality is great and as a bonus I asked about them making leather cutting tools and they said they are in the process of making some. 😊
Can you add in to your list carving tools from: gilleskaltai Metal hardiness: 57HRC Metal: high quality carbon spring steel 51CrV4 I'm lucky, manufacturer is from same country :}
Some woodcarving tool set I would avoid are the harbor freight sets. I tried them but had to modify them to get the results I could get straight out the box from better brands.
Great introduction to these tools! I cant decide between the flexcut palm and knife or the schaaf 5 piece, leaning towards the schaaf though. Ill mostly be making fishing lures and maybe small animals
I carve mostly spoons. I have a Beavercraft and a Morakniv 164 spoon carving knife. I no longer use the Beavercraft. I was looking to possibly upgrade my spoon knife. Who would you say makes the better spoon knife, the OCC/ Kryshak or the Drake knife? Will both of these spoon knives perform better than the Mora 164? Thanks. :)
Thr drake hook knife is a really really good one since its thin and allows for small, shallow, smooth cuts. But the OCC one I have is thick enough to be aggressive on tougher wood and has my go to for most spoons
@@CarvingisFun I ordered the OCC knife for now. I might still end up grabbing the Drake knife sometime in the future. Thanks for the reply. It's always fun giving new tools a try. :)
The only issue I have with the Flexcut beginner set is that KN-12 knife. I have yet to find anything that knife is good for. Too small to be a good roughing knife and not shaped right to do detail work. I wish they would replace it with their regular roughing knife. It along with the KN-13 (excellent knife) and the gouge and V tool would be the ideal set.
Hello, I am new to wood carving. I'm planning on carving animals and spoons. I cannot decide between the BeaverCraft Deluxe Kit and Schaaf 5 piece set. Which one would you recommend (quality wise)?
Most saws I have used are great, but lately I have been using one of those Japanese Pull Saws and love it. Lots of brands to choose from, have yet to see someone mess up a saw really.
I'm a beginner, I have a Beaver Craft set I've been learning on. If I want to go a step up in knife quality, what would you recommend? Is FlexCut a big enough difference from Beaver Craft to invest in? Or will I need to go even nicer to see a noticeable difference? What would you recommend stepping up to from Beaver Craft now that I know I want to continue this hobby? @CarvingisFun
Flexcut is indeed a big noticeable difference in step up from Beavercraft. It is thinner and has a smaller edge angle which allows for a much smoother cut through the wood. Either Flexcuts Palm and Knife set or 3 piece whittling set will be the way to go. I also made a video comparing the differences in how they cut for visual reference: ua-cam.com/video/bL4PbFFVXIw/v-deo.html
Tools mentioned in the video:
Beavercraft
Spoon carving kit: amzn.to/48tJa3l
Whittling kit: amzn.to/48oznv7
Deluxe Kit: amzn.to/48l7mFv
Flexcut
Palm and knife set: amzn.to/3Rv92F8
3 Knife set: amzn.to/3GRF4Gj
Beginners palm set: amzn.to/3TI3OIV
6 piece chisel set: amzn.to/3TzOzBy
Schaaf Tools
3 piece set: amzn.to/41zWpNs
5 piece set: amzn.to/3tEdxVL
7 piece set: amzn.to/3TCCMSZ
Pen chisel set: not available yet
OCC Tools / KCT
Treeline USA: treelineusa.com/traditional-carving/occ-knives-formerly-shipley-knives/
Hummul: hummul.com/occ-tools/
Mountain Wood Carvers: mountainwoodcarvers.com/collections/occ-tools
mountainwoodcarvers.com/collections/kct-tools
Chipping Away: www.chippingaway.com/cat/hand-woodcarving-tools-accessories/kct-carving-tools-custom-made/
Silvern Works: www.silvernworks.com/shop/
Helvie Knives: helvieknives.com/
Drake Knives: drake-knives.myshopify.com/collections
Pfeil
4 piece intro set: amzn.to/3tEdxVL
Brienz Set: amzn.to/3v9ucRI
Two Cherries 11 piece set: amzn.to/41Qi8RH
Stryi: stryicarvingtools.com/
I totally agree with your assessment. The Pfeil tools (IMO)are a bit over priced. The Two Cherries are wonderful! The Flexcut come from the factory ready to carve...I have a couple members in our carving club who have purchased the Beavercraft & the Schaaf tools...Nice introductory level tools. Good steel but, will need a fair amount of sharpening/tuning to make them scary sharp & ready to carve...Thank you for a great video. Let's hope more people give wood carving a try...It's great for lowering blood pressure, fighting ADHD and makes you more attractive to the 'opposite' sex...I mean, c'mon...Who doesn't like someone who is creative and plays with surgically sharp tools? (OK, I might have embellished that last part just a wee bit...Merry Christmas to all. And, to all a good night
Is it an in person or online group?
I love beaver craft the price and quality is great and as a bonus I asked about them making leather cutting tools and they said they are in the process of making some. 😊
I just got a super simple set for Christmas, excited to explore a new hobby
Can you add in to your list carving tools from: gilleskaltai
Metal hardiness: 57HRC
Metal: high quality carbon spring steel 51CrV4
I'm lucky, manufacturer is from same country :}
Thanks for this compact video! Will definetly watch again when I have time to improve my whittling skill and tools. ^^
Some woodcarving tool set I would avoid are the harbor freight sets. I tried them but had to modify them to get the results I could get straight out the box from better brands.
Oh absolutely, they are terribleaaa
Great introduction to these tools! I cant decide between the flexcut palm and knife or the schaaf 5 piece, leaning towards the schaaf though. Ill mostly be making fishing lures and maybe small animals
Personally, I really really like the shaaf 5 piece. Haven't even touched my palm n knife set since I got the schaaf set
Nice video Brian! I'm going to mention this in the next episode of Wood Carving Weekly. Happy Holidays!
Yay!! Thank you!!
My pleasure! @@CarvingisFun 👍
I carve mostly spoons. I have a Beavercraft and a Morakniv 164 spoon carving knife. I no longer use the Beavercraft. I was looking to possibly upgrade my spoon knife. Who would you say makes the better spoon knife, the OCC/ Kryshak or the Drake knife? Will both of these spoon knives perform better than the Mora 164? Thanks. :)
Thr drake hook knife is a really really good one since its thin and allows for small, shallow, smooth cuts.
But the OCC one I have is thick enough to be aggressive on tougher wood and has my go to for most spoons
@@CarvingisFun I ordered the OCC knife for now. I might still end up grabbing the Drake knife sometime in the future. Thanks for the reply. It's always fun giving new tools a try. :)
Just keep in mind that the wait time for Drake will be 6 months or more, still waiting on some tools on my end
The only issue I have with the Flexcut beginner set is that KN-12 knife. I have yet to find anything that knife is good for. Too small to be a good roughing knife and not shaped right to do detail work. I wish they would replace it with their regular roughing knife. It along with the KN-13 (excellent knife) and the gouge and V tool would be the ideal set.
Honestly, I completely agree with you there. It would be an upgrade for sure!
Hello, I am new to wood carving. I'm planning on carving animals and spoons. I cannot decide between the BeaverCraft Deluxe Kit and Schaaf 5 piece set. Which one would you recommend (quality wise)?
Personally, I like my Schaaf 5 piece set better
What do you think about the Mora carving knives?
I like em!!! Ive had several and they have been great tools!!
Can you recommend a good hand saw that is also available in Europe?
Most saws I have used are great, but lately I have been using one of those Japanese Pull Saws and love it. Lots of brands to choose from, have yet to see someone mess up a saw really.
thankyouu
Holli from Helvie has cancer, and they have a Gofundme set up for anyone who wishes to donate. Even sending them prayers helps
Will u sell me old tools of yours just starting
All of my old tools are up for sale on Ebay :)
@@CarvingisFun nice what’s your name on eBay. I’ll look you up .
www.ebay.com/usr/paintzapper
I'm a beginner, I have a Beaver Craft set I've been learning on. If I want to go a step up in knife quality, what would you recommend? Is FlexCut a big enough difference from Beaver Craft to invest in? Or will I need to go even nicer to see a noticeable difference? What would you recommend stepping up to from Beaver Craft now that I know I want to continue this hobby? @CarvingisFun
Flexcut is indeed a big noticeable difference in step up from Beavercraft. It is thinner and has a smaller edge angle which allows for a much smoother cut through the wood. Either Flexcuts Palm and Knife set or 3 piece whittling set will be the way to go. I also made a video comparing the differences in how they cut for visual reference: ua-cam.com/video/bL4PbFFVXIw/v-deo.html