Just a quick thing to share from years of messing with wheels...you might want to ALWAYS start the lug threading process by hand...not with the torque gun. Get it started by hand so you don't cross-thread and ruin your day. Ask me how I know. Basically takes you an extra minute per wheels but you are 100% guaranteed not to f@ck up your wheel stud. Also, even with the aftermarket socket driver, wrap a few turns of painter's tape around it so you don't scratch the finish of your wheel inside the lug hole. Peace and love.
@@dalvinmembrere558 it does rub slightly but mostly just on the plastic liners so you could easily remove them/ trim them or just keep the height up a bit
Dude sick wheels I’m just starting to mod the hatch and I’m looking into the kansei tandems I’m just having an issue where I’m not sure what lug nuts to use. I’m curious what you used for lugs thanks !
Hey bro thanks for the video! Very informative! I’m looking to get Enkei TS-10s for my 22 corolla. What specs would give me the concave look? I know they come flat in certain specs. And suggestions?
Thats sick! Id say the best offset yoy could do to save you from poking would be a +20 offset any closer to 0 you will need way more camber to not poke
Your videos are super helpful and your car is beautiful! I’m looking for a wheel/tire setup as well, what would you recommend if I’m going to leave mine stock height to have the tires just inside the fender like yours?
How come you didn’t go with a 18x8.5 +35 I joined a group and that seems to be the sweet spot that’s what I plan on running as well just wanted your thoughts
alright.. When I saw the rims before you mounted I thought “man why did he pick those out, those won’t look right.” After I saw the wheels mounted and the car on the floor I was like, “damn that looks sick!” lol
Do you have camber arm on the rear? or how much camber are u running all around? I'll run +20 on 18's 8,5 with 215/30R18 on my setup that's why I wanna know.
I see what you mean about the difference in the rubber showing on the left side.. Before you noticed this, did you drive the car around a little to let everything settle? what about after the the alignment? Small abnormalities like that drive me nuts, but overall.. It still looks great man.
Yes so i did drive it for a week now and its been better but i ended up adding a bit more camber to make up for it cause the alignment said the was slightly less on that side, seems much better now. And thank you!
Hey hope you're good man. Wanted to let you know of a free mod thats gonna make a huge difference. You always talk about making your rolla a bit more responsive and intuitive. The clutch feel on these things is horrible and makes everything super jerky. I took out the clutch pedal helper spring and thing feels 1000x better. 1st to 2nd was always weird and jumpy, now everything feels super responsive and predictable. The spring pushes your foot out all of a suden and doesn't let you feel the clutch. Doesn't feel heavy at all without it. Just wanted to share with you just in case. Nobodys talking about this on the corolla but its a really well known mod on platforms like the brz, 350/370z etc. Much respect all the way from Puerto Rico. Keep killin it with your build. Thing looks fkn perfect man
Sick fitment, I'm nowhere near doing this to my car but I love getting ideas. Keep it up! I basically have the same car except it's automatic lol was it worth doing the engine mount modification by the way?
That’s awesome tho! And thank you! id say the rear mount is worth it if ur looking to make the car more raw and add some more feel to the car, its less comfy than the stock one so keep that in mind
@@ricevlogs_ No prob, yeah we live in the same vicinity so I'll be looking to you for advice for sure. I'm near Toronto so basically the same weather. I've been looking at replacing the fake rear exhaust tips since I got the car but will wait until my warranty goes. Only has about 22k km on it but it's a 2021, got it in August by luck because it rolled in from a one-year lease.
Bro, you answer all the questions!! Super valuable info for those looking to do aftermarket wheels!! I've been wondering even after bookmarking Fitment. Can you tell me if aftermarket wheels and exhaust would void warranty? Intake, probably not!?
Hey thanks man love the input! I know for sure wheels and suspension wouldn’t void warranty as for the intake and the throttle spacer if your considering it those may depend on your dealer every dealer is going to be a bit different but you could simply ask they will be able to help
Looks so good! This has made me rethink the setup I was thinking of running. Do you get any crazy rub or anything? This is also my daily so want a clean look, but still keep it pretty practical. Did order a set of RS-R super downs.
Looks so good! Did you have to roll the fenders? And how much camber are you running? Considering getting these same specs for my hatch. Thanks for all the info 🤙
i just got my set of wheels and i shouldve looked a little more, i got +40 offset and i shouldve gottan +25 like you did, looks much much better, maybe ill get another set and sell the one i have rn
@@ricevlogs_ yeah ive noticed that the rear wheels are more on the inside than the front, but ive changed my minds im gonna get extended wheel studs and run spacers safely instead
Old wheels were way better. Stretched tyres are dumb and slower, tiny sidewall is dumb and slower on real roads, bigger rim is heavier and slower and dumb, white wheels look cheap and are also dumb.
Pi….what a “dumb” name….a great mathematical concept but not a great name. My son just bought an SE hatchback in white. He’s loving the 40mpg compared to to 13 he was getting on his Pro 4Runner with 285s. Congrats on your build and I enjoy your channel.
![Cosmo racing short shifter install, on the 22 corolla hatchback! [4K]](http://i.ytimg.com/vi/gmcip8wb5UE/mqdefault.jpg)
![Cosmo racing short shifter install, on the 22 corolla hatchback! [4K]](/img/tr.png)
![2022 Corolla Hatch gets some new Aero! ( Things didn’t go as planned!) [4K]](http://i.ytimg.com/vi/6BS9VyZvP-Y/mqdefault.jpg)
Just a quick thing to share from years of messing with wheels...you might want to ALWAYS start the lug threading process by hand...not with the torque gun. Get it started by hand so you don't cross-thread and ruin your day. Ask me how I know.
Basically takes you an extra minute per wheels but you are 100% guaranteed not to f@ck up your wheel stud. Also, even with the aftermarket socket driver, wrap a few turns of painter's tape around it so you don't scratch the finish of your wheel inside the lug hole. Peace and love.
Yeah good point
This guys moving too fast with his rolla!!! I love it!!!
☺️ thank you bro more coming soon!!
Does it rub? Might actually go with this fitment in the future for daily use
@@dalvinmembrere558 it does rub slightly but mostly just on the plastic liners so you could easily remove them/ trim them or just keep the height up a bit
Nice Corolla man!! Love it! Looks balanced just the way it sits.
Hey! Thanks man glad u like it!
Dude sick wheels I’m just starting to mod the hatch and I’m looking into the kansei tandems I’m just having an issue where I’m not sure what lug nuts to use. I’m curious what you used for lugs thanks !
Just some ebay lugnuts and love the tandems!!
Hey bro thanks for the video! Very informative! I’m looking to get Enkei TS-10s for my 22 corolla. What specs would give me the concave look? I know they come flat in certain specs. And suggestions?
Thats sick! Id say the best offset yoy could do to save you from poking would be a +20 offset any closer to 0 you will need way more camber to not poke
Your videos are super helpful and your car is beautiful! I’m looking for a wheel/tire setup as well, what would you recommend if I’m going to leave mine stock height to have the tires just inside the fender like yours?
Probably ho for something around a +35 offset for stock ride height
How come you didn’t go with a 18x8.5 +35 I joined a group and that seems to be the sweet spot that’s what I plan on running as well just wanted your thoughts
I wanted to be as close to the fenders as possible once i went on air
Looks great! I have been wondering what some TE37s would look on these. That blue is SHARP!
Thanks!
alright.. When I saw the rims before you mounted I thought “man why did he pick those out, those won’t look right.” After I saw the wheels mounted and the car on the floor I was like, “damn that looks sick!” lol
Hahaha thats sick! Thank you bro trust the process 🙏🏼🥹🔥♥️
Real insightful thanks a ton brother 🫡
Absolutely! Thank you!
Looks awesome man, can't wait to see what else you put on the car.
Thank you very much!
Whoa! Nice for show! Looks good!
Thank you!
I like how the supra just chillin
Yes sir! 😂
Do you have camber arm on the rear? or how much camber are u running all around? I'll run +20 on 18's 8,5 with 215/30R18 on my setup that's why I wanna know.
No, I don’t have camber arms in the rear. I’m at about 3° at all four corners.
I see what you mean about the difference in the rubber showing on the left side.. Before you noticed this, did you drive the car around a little to let everything settle? what about after the the alignment?
Small abnormalities like that drive me nuts, but overall.. It still looks great man.
Yes so i did drive it for a week now and its been better but i ended up adding a bit more camber to make up for it cause the alignment said the was slightly less on that side, seems much better now. And thank you!
Looks good! What kind of side mirror caps do you you have?
They are ebay ones lol they fit great! And hold well!
Would 18x9.5 +25 with 225/40/18 look similar to your setup?
Yes
Hey hope you're good man. Wanted to let you know of a free mod thats gonna make a huge difference. You always talk about making your rolla a bit more responsive and intuitive. The clutch feel on these things is horrible and makes everything super jerky. I took out the clutch pedal helper spring and thing feels 1000x better. 1st to 2nd was always weird and jumpy, now everything feels super responsive and predictable.
The spring pushes your foot out all of a suden and doesn't let you feel the clutch. Doesn't feel heavy at all without it. Just wanted to share with you just in case. Nobodys talking about this on the corolla but its a really well known mod on platforms like the brz, 350/370z etc.
Much respect all the way from Puerto Rico. Keep killin it with your build. Thing looks fkn perfect man
Thank you so much for the support and feedback i will have to look into this! Definitely sounds like it could be a nice upgrade!
@@ricevlogs_ No prob at all, if you have any questions before or after doing it (if you do) just hit me up on here. Happy thanksgiving man 🍻
@@carlosa.acevedo7466 haha thanks same to you!
Sick fitment, I'm nowhere near doing this to my car but I love getting ideas. Keep it up! I basically have the same car except it's automatic lol was it worth doing the engine mount modification by the way?
That’s awesome tho! And thank you! id say the rear mount is worth it if ur looking to make the car more raw and add some more feel to the car, its less comfy than the stock one so keep that in mind
@@ricevlogs_ No prob, yeah we live in the same vicinity so I'll be looking to you for advice for sure. I'm near Toronto so basically the same weather. I've been looking at replacing the fake rear exhaust tips since I got the car but will wait until my warranty goes. Only has about 22k km on it but it's a 2021, got it in August by luck because it rolled in from a one-year lease.
Bro, you answer all the questions!! Super valuable info for those looking to do aftermarket wheels!! I've been wondering even after bookmarking Fitment. Can you tell me if aftermarket wheels and exhaust would void warranty? Intake, probably not!?
Hey thanks man love the input! I know for sure wheels and suspension wouldn’t void warranty as for the intake and the throttle spacer if your considering it those may depend on your dealer every dealer is going to be a bit different but you could simply ask they will be able to help
That car is beautiful👌👌 awesome job!
Thank you!
Looks AMAZING!!! ✌🏾❤️✊🏾
Thanks bro!
Looks so good! This has made me rethink the setup I was thinking of running. Do you get any crazy rub or anything? This is also my daily so want a clean look, but still keep it pretty practical. Did order a set of RS-R super downs.
Rubbing a little on plastic fender liners and a bit on the front fender brackets but nothing too bad!
@@ricevlogs_ appreciate the reply dude! Glad it's nothing too bad. Definitely going to consider running the +22
@@MaybeDino thats great to hear! Best fitment!!
Good stuff! Any plans on buying the GR Corolla in the future?
Nah I would love to but just dont think I would actually be able to get my hands on one!
Hi know im late😂 Just wanted to ask what the pcd of the rims is.
Pcd?
Those wheels and tires are fucking awesome 👏
Ayyy thanks man i love them so much get tons of compliments on them!
Looks so good! Did you have to roll the fenders? And how much camber are you running? Considering getting these same specs for my hatch. Thanks for all the info 🤙
No fender roll and 3 degrees
i just got my set of wheels and i shouldve looked a little more, i got +40 offset and i shouldve gottan +25 like you did, looks much much better, maybe ill get another set and sell the one i have rn
Yeah, it’s definitely a bit more aggressive. It takes a little more to make them fit in the front a little nicer though.
@@ricevlogs_ yeah ive noticed that the rear wheels are more on the inside than the front, but ive changed my minds im gonna get extended wheel studs and run spacers safely instead
That looks so dope
Thanks!!
Wheels are 18 right ? You add said
19x9.5
Yes
Sorry
I was going to get those exact same wheels for a my Rolla before I went a diff route 😅
Oh dang thats pretty neat! Whatcha end up getting?
Would the stock lugs still fit them ?
No they would not
🔥🔥🔥
😌
19x9.5 +22 all around ?
Yup!
My man make a video of that supra in the background.
👀
Like right
I wish they were dark colour 😢 it would look 10x better, just saying. 😊
Thanks for the input im happy with the white.
Wheels modèle?
Kensei astro
Maybe you need a wheel alignment?
Yeah tried that it didnt help tho
mirror cover name?
No name, just from ebay easy find
Wait is that a Supra in the background
😉
Let’s see the Corolla vs the f body
Which one lol
@@ricevlogs_ the one in your garage
@@corollachris5420 ahhh u mean the miata
A car for my parents. And I'm 70!
Nice!
fix the front camber gonna make the car pull if u haven’t yet
All good now thank you
Old wheels were way better. Stretched tyres are dumb and slower, tiny sidewall is dumb and slower on real roads, bigger rim is heavier and slower and dumb, white wheels look cheap and are also dumb.
Thank you!
Pi….what a “dumb” name….a great mathematical concept but not a great name. My son just bought an SE hatchback in white. He’s loving the 40mpg compared to to 13 he was getting on his Pro 4Runner with 285s. Congrats on your build and I enjoy your channel.
@@Dano-MX5 It’s not really a concept just a ratio.
@@Dano-MX5 thanks!