BEST PC Settings for Warzone SEASON 1 Reloaded! (Optimize FPS & Visibility)

Поділитися
Вставка
  • Опубліковано 23 гру 2024

КОМЕНТАРІ • 181

  • @FourEyesGames
    @FourEyesGames  11 місяців тому +2

    Head over to FPS Hub to unlock your PC's FULL POTENTIAL!
    Use code "4EYES" for $15 off any order over $100:
    www.fpshub.org/

    • @josemyerston1084
      @josemyerston1084 11 місяців тому

      Hi, thanks as always! But now they released FSR3 do you think it’s worth it??? Supposedly “Doubles” fps but what about input delay and visual quality, Have a good day.

    • @fernanspray
      @fernanspray 11 місяців тому

      hello, in nvidia profile inspector the settings you usually recommend have changed, they are no longer available, do you have a video now or in the future to adress that matter ??? thanks for everything you do for the community !!!

  • @dirtysaint7930
    @dirtysaint7930 11 місяців тому +12

    Thank you! I watched about 2 hours worth of "the best settings" videos with no luck. Found your video and have not lagged or stuttered once.

  • @85se30
    @85se30 11 місяців тому +3

    found you from reddit. after update the game was a snail. this fixed it. much respect mate!

  • @nativewarrior3375
    @nativewarrior3375 4 місяці тому

    Thank you!! I’m new to PC and it helped improve my FPS from 65 to 140+

  • @LaJoker
    @LaJoker 10 місяців тому +1

    AMF FSR 3.0 Frame Generation is amazing as of Feb 2nd 2024 on the latest AMD Drivers
    For those on AMD cards, just make sure you have Anti-Lag turned on inside the Adrenalin Software, but Enable the frame gen in the game.
    Whatever FPS your game is capped at in game, Frame gen will almost double that; but because we have Anti-lag turned on from before, that hit in latency from AMD FSR 3.0 Frame Gen is minimal.
    Cheers everyone!

  • @JackyBobby192
    @JackyBobby192 11 місяців тому +2

    This is old video? AMD FSR 2.1 has been replaced in this update by 3.0 version. Would like to know if this is any better, worse, same as 2.1? Probably should actually play the game before chucking a video out

  • @issinit1
    @issinit1 11 місяців тому +5

    Went from avg 97fps to 133 with these settings! Awesome! Thank you

  • @shawnmayhorn977
    @shawnmayhorn977 8 місяців тому

    does removing the blood effects in the .ini files remove dismemberment effects? because i haven't had those effects since i did this.

  • @Kerleyy_
    @Kerleyy_ 11 місяців тому +3

    Since you made this video cod have updated FSR to FSR 3 with the option for Frame Generation

    • @starsgalka
      @starsgalka 11 місяців тому

      REPLY!!! I'm also curious about this, I haven't noticed any jumps in latency. Definitely a good video. Subbing Fam

  • @Tearitoffem
    @Tearitoffem 10 місяців тому +1

    So after doing all this, when I first reboot the game my shaders pre loading stuck at 0%. Is there any fix for this?

    • @MatrixProHD
      @MatrixProHD 10 місяців тому +1

      It takes a long time, but no longer than 10 minutes

  • @teampenster
    @teampenster 11 місяців тому +2

    The games broken so how are these settings correct?

  • @w1nk901
    @w1nk901 11 місяців тому +1

    You'd think a video like this would be for those with a below average pc. Seems like this is geared for people who already get high frames to go even higher.
    Would be awesome if you made a video for those struggling to get good frames

  • @Hefe223
    @Hefe223 11 місяців тому +1

    Bro I appreciate you I’m not gone lie I was randomly searching through settings videos and just watched your full video … and man I must say your a wizard lol my aim is 100% better thanks to you

  • @rossariodigiovanna1003
    @rossariodigiovanna1003 10 місяців тому

    Would you recommend these settings for ranked as well? If not can you make a dedicated video for ranked play?

  • @21Dazzler
    @21Dazzler 11 місяців тому

    Just a heads up on AMD Frame Gen is available on FSR3.0

  • @kelsipherzatozia840
    @kelsipherzatozia840 11 місяців тому +1

    Not only does frane generation introduce a ton of latency, it also introduces stutter and also just looks jittery.
    a 300fps cap without frame generation looks smoother than 300+fps with frame generation

  • @chrisroberts826
    @chrisroberts826 9 місяців тому

    My in-game graphic settings and config files keep resetting. I have tried putting the options.4.cod23 file in read only and it still resets? Help please! 😞

  • @GaryGreys-ri4wi
    @GaryGreys-ri4wi 11 місяців тому +1

    See you upgraded GPU! Just wondering why you didn't wait on the 50 series? Had a 3090 ti didn't you

  • @LetPapaCook
    @LetPapaCook 10 місяців тому

    Is there another word for "cores" i cant seem to find "physical cores" for my GPU

  • @808React
    @808React 3 місяці тому

    Copied all steps exact. But the f12 button to get 120 did not work lol what did i miss?

  • @Vect100X
    @Vect100X 10 місяців тому

    Not sure if it's just my CPU (I7 9700k), but when I set my render worker count to exactly half of my cores (4), I get nearly 30 more fps.

  • @bfgswazzy8382
    @bfgswazzy8382 9 місяців тому

    Bro just earned a Sub went from 120 to 144 thanks my guy 💪🏽

  • @SharpYT97
    @SharpYT97 11 місяців тому +2

    I’d honestly settle for being able to play with friends can’t update up weapons screen keeps flicking to fetching profile and joining game session and can’t get my loadout from the game without it freezing and sounding like an indicator

  • @rudymurillo1693
    @rudymurillo1693 4 місяці тому

    wait so if i have 16 cores ND 24 THREADS AND 8 OF THOSE 16 CORES ARE PREFORMANCE CORES AND THE OTHER 8 ARE EFFICIENCY CORES DO I USE 8 OR 16 IN THAT NUMBER

  • @JoyCasey-s2n
    @JoyCasey-s2n 10 місяців тому

    helped me out so far, been having problems for last week and so far 3 clean games on PC with improved Frame ! THX

  • @coryrocko8784
    @coryrocko8784 6 місяців тому

    I got a 4070 and I run fidelityfxcas at 70 with DLSS frame generation on and my latency is great, so I’m not sure what you mean by bad latency cause I’m not seeing that at all

  • @TheMusicguy..
    @TheMusicguy.. 10 місяців тому

    Hey you know at 23:29 if I put the wrong number in by mistake because I’m terrible with knowing anything about my pc, would it cause the game to crash and make my pc restart? Thanks

  • @arslaanraxa
    @arslaanraxa 10 місяців тому

    After making changes as per you. I start getting DirectX Error every time I start the game.

  • @MisterALX
    @MisterALX 10 місяців тому

    I have a very good FPS both Resurgence and Battle Royale when I am also streaming, I have never had this performance before! Cheers mate!

  • @pinkmoros7229
    @pinkmoros7229 11 місяців тому

    did you record the video before the reload season came out? FSR3 is not in the settings, how can you talk about the settings if you don't know how they behave in the new season?

  • @ne0bis
    @ne0bis 10 місяців тому

    Since i try setting up all this, my game always reset all my settings to default when i restart... any help?

  • @TheeEnigma
    @TheeEnigma 10 місяців тому

    Love the settings but when you do the whole changing stuff in note pad it crashes the game every so often

  • @HumbleTrav76
    @HumbleTrav76 11 місяців тому

    Are it so for the render worker count for cores? There's a debate with an AMD CPU for you to use half your cores. Have you heard about that? Community?

  • @titantech6328
    @titantech6328 11 місяців тому +3

    Was sitting around 65-110 fps @90fov
    Did the mentioned changes
    BUT used amd fsr3.0 and frame generation
    And getting 175-200+ fps @ 120fov
    Also seems my packet loss and extrapolation issues may be reduced or gone but ill need to play a couple dozen games to see
    Should also mention I'm on a ryzen 5600x with a Rx 580 8gb and 64 GB ram fully overclocked.
    (Upgrading soon to a 5800x3D and 7800xt)

    • @karma5319
      @karma5319 11 місяців тому

      I was sitting 110 avg at fps. I notices turning only FSR boosted my fps by 10/20 though hell broke loose when I enabled AMD Frame Generation now I am getting 250+ constant. I did not that Frame generation option does cause some images to look a bit off though I feel getting 100 fps boost is the best deal I can get.

    • @ysmmac6015
      @ysmmac6015 11 місяців тому

      @@karma5319same here. 90-120 but typically in the 110 range. turned it on and it got to over 300 frames and my game crashed. i have my fps capped at 165 too and it went that high. but my game was crashing on fidelity cas (which is what i normally run) as well so i think it’s just the game and the update.

    • @titantech6328
      @titantech6328 11 місяців тому

      @@karma5319 only real big difference i have seen in the 3 hours gaming since my original comment is grass looks absolutely horrible and trees from afar are jagged asides from that anything nearby looks fine player models look fine no weird ghosting or screen tearing.

    • @karma5319
      @karma5319 11 місяців тому

      @@titantech6328 Agreed.

    • @End0fst0ry
      @End0fst0ry 11 місяців тому

      @@karma5319 those extra frames are the cause of excesive latency problem. It's fake frames.

  • @TheDonDCAC
    @TheDonDCAC 11 місяців тому +4

    you have "focused mode" mixed up. It's a great setting if you have multiple monitors. It's a dimming switch for the brightness of the second monitor. A setting of zero leaves the second monitor at full brightness, a setting of 100 makes the second monitor completely black. I set mine at 70, which brings my second monitor to 30% brightness which allows me to "FOCUS" on the game better. It's a really good setting to use if you have 2 monitors and play in a dimly lit room.

    • @iamdaviddrew
      @iamdaviddrew 11 місяців тому

      so if i have only 1 monitor basically it will do nothing ?

    • @TheDonDCAC
      @TheDonDCAC 11 місяців тому +1

      @@iamdaviddrew my understanding is that if you had single monitor, and the game playing in a window (not full screen) everything outside of the game window would be dimmed

  • @bencousins5488
    @bencousins5488 10 місяців тому

    Beauty mate this helped heaps, I'm getting around 180-200 fps but it doesn't feel very smooth, it feels like maybe 100, Anyone have a fix for this?

  • @FootyLoverTom
    @FootyLoverTom 11 місяців тому +1

    How did you know about fov affecting aim assist? Not seen anything on this, would like to find out

    • @cyprowski
      @cyprowski 11 місяців тому

      Probably trial and error

  • @KrauuziWedkuje
    @KrauuziWedkuje 10 місяців тому +1

    I usually have between 100-140fps and I did everything you said in the video. It went to 280-300fps. As I stream the game as well I wanted to get some quality back so I increased some settings and Im still getting 200-220fps and the quality is great. THE BEST VIDEO ON UA-cam ! THANK YOU SO MUCH.

  • @andr3d3co
    @andr3d3co 11 місяців тому +3

    @FourEyes Hi bro.. thank you for the video.. i have 1070ti 8gb VRAM 16gb RAM.. which VRAM SCALE should i put playing while streaming with OBS to not have any problems.. maybe 70% ? i get 100 fps only gaming and 80 fps gaming + streaming

    • @End0fst0ry
      @End0fst0ry 11 місяців тому

      The game on high texture settings uses 13.6 gb of vram, just saying

    • @GaryGreys-ri4wi
      @GaryGreys-ri4wi 11 місяців тому

      ​@@End0fst0ryno it doesn't lol max higbia lole 5000 6000 Mbs 5 6 gbs. In old gpus max the vram scale out. Because of the bandwidth memeory ect

    • @GaryGreys-ri4wi
      @GaryGreys-ri4wi 11 місяців тому

      ​@@End0fst0ryon 4k it may use 13gb lol 1080p and 1440p nahhhhhh

  • @potsy1013
    @potsy1013 11 місяців тому +3

    New to PC, scared the life out of me going in changing settings in config. Cheers though, followed everything. Now to test !

  • @lutfifernando8947
    @lutfifernando8947 10 місяців тому

    My PC ryzen 5 3500 gpu rtx 2060 super, ill try tutorial on yt but still very lag and the build is crush when i play

  • @NoTime4Mercy
    @NoTime4Mercy 10 місяців тому

    yo, thanks for your videos, im a new fan

  • @1Dutchie
    @1Dutchie 11 місяців тому

    have gone through all the steps. but now when I start warzone my laptop crashes. what am I doing wrong? Help!!!

  • @yung_yura
    @yung_yura 8 місяців тому

    Legend! Thank you 💪🏻💯

  • @ThomasVonbretzt
    @ThomasVonbretzt 11 місяців тому

    If you acitivate hags on you have also to enable resiszable bar in you bios..

    • @FourEyesGames
      @FourEyesGames  11 місяців тому

      That's just completely false.....

  • @BIGHEADjr51
    @BIGHEADjr51 11 місяців тому

    20k views and supposedly only 500 of u guys r subbed to this ch. That’s crazy numbers

  • @GcontrollerG
    @GcontrollerG 11 місяців тому

    Hey mate i use on lm mode in game and off in nvidia custom games and ultra in control panel is it ok?

  • @Tim-NarcWahlberg
    @Tim-NarcWahlberg 11 місяців тому

    Ive always used your videos for Battlenet Call of Duty, but I have a question about Steam Call of Duty. No matter what I do I always have blocky pixelated video in game. The ONLY way I have figured out how to fix it at the beginning of each match is to switch it Extreme graphics & back to Ultra. But when & if I go into Gulag, I have to do the same thing again & then again when I come out of Gulag.

  • @Denbot.Gaming
    @Denbot.Gaming 10 місяців тому

    I cant do it 😅 I prefer cranking the settings up, and using AMD Adrenalin to lock the FPS with chill and get sub 4ms latency, I like the immersion and look.
    If you want to be competitive and max the FPS out with these settings for sure.

  • @Imdust12
    @Imdust12 10 місяців тому

    Have to comment here. My rig rocks a 5700G and a RX6700XT w/16 vb RAM. without this settings I was having 90/110 FPS and after this I’m achieving 140+ even 160. THANK YOU❤️❤️❤️❤️❤️

  • @SuperHandsAcoustic
    @SuperHandsAcoustic 10 місяців тому

    I follow your setup every time. Best settings hands down. 👌

  • @Insightfultv
    @Insightfultv 10 місяців тому

    Love the guides Dave, absolute class and clean editing!

  • @alejandromunoz6478
    @alejandromunoz6478 10 місяців тому

    Bro... I was using your settings and was able to play perfectly on my HP Gaming Laptop (GTX1650, 16gb RAM, Intel Core i5), and now since a couple of day I cannot get more than 45fps on average, sometimes dropping below 30, it is unbearable... please help me fix this!!!!

  • @mathysboucher7273
    @mathysboucher7273 10 місяців тому

    really good video quick and straight to the settings

  • @Blizzy77
    @Blizzy77 11 місяців тому +2

    Might have try out the optimization. Ive got a 4080 i7 12700KF and i can get 250fps but i feel like i could get it closer to 300

  • @steveski111
    @steveski111 11 місяців тому +1

    Thank you so much for the updated video! I watch everyone of your optimizations. I do have a question for you, I have a 4090 with a Ryzen 9 7950x3d what should I set my renderer worker count to in the config file? Also are there any settings you would adjust with my above specs? Thank you again appreciate all you do!

    • @pawelwozniak8361
      @pawelwozniak8361 11 місяців тому +1

      Hi mate. Before update I setup 8 , after update recommend 16 because if is 8 I see different input lag on my controller. I have the same build.

  • @ianmcnamara8870
    @ianmcnamara8870 11 місяців тому

    Fantastically made video man, thanks!

  • @NikoReyes-y9i
    @NikoReyes-y9i 11 місяців тому

    how do i put my settings in config back to original

  • @KanyesNum1Prodigy
    @KanyesNum1Prodigy 11 місяців тому

    Curious why you flip flop on the “Renderer Worker Count” setting in each optimization vid. Last vid it was “cores minus 1” (which is common), before that it was “core count,” and now, again, you are recommending to input the # of cores.
    Any explanation on why your opinion shifts back and forth? Legitimately just curious lol

    • @FourEyesGames
      @FourEyesGames  11 місяців тому

      In Warzone/MW3, I always have recommended to set to total number of Physical Cores

  • @kavariusclark6189
    @kavariusclark6189 11 місяців тому

    My pc froze up on these setting what do I need to do

  • @GaryGreys-ri4wi
    @GaryGreys-ri4wi 11 місяців тому +1

    Resizable bar works fine if you dont use custom profiles in the nvidia control or nvidoa profile inspector. If you used custom profiles..say choose cod.exe..You will cause issies with resizable bar if you have the custom profile It disables itself even though tje config file has it set to false. If you want resizable bar on warzone...disable the custom profiles and just have nvidias set scross the boar. Issue sorted.

  • @shadoww9194
    @shadoww9194 11 місяців тому +1

    btw ur display resolution if u put that lower u get more fps dont listen to him automatic makes fps lower

  • @twauntwaun3166
    @twauntwaun3166 11 місяців тому

    I have a GeForce rtx 3060 gpu how do I find the core I need

    • @jesus_wts
      @jesus_wts 10 місяців тому

      its 6, put it to 5, always one lower.

  • @richraymond5190
    @richraymond5190 11 місяців тому

    Good afternoon. I am a subscriber and I come to you after every new update. Favour ... can you just run through the optimal settings without explaining them? I've heard why I should and shouldn't have certain things on or off and high or low so many times I trust you. Just low - off - very low - high ... etc

  • @ΣτεφανοςΚεχαγιας-η2ε
    @ΣτεφανοςΚεχαγιας-η2ε 10 місяців тому

    I did everything exactly as you said on my gaming laptop and I only got about 15 fps more but the graphics now look terrible.

    • @jesus_wts
      @jesus_wts 10 місяців тому

      shitty gaming laptop😂, i got a 3060, 16gb ram, ryzen 5 5500, get about 180fps

    • @ΣτεφανοςΚεχαγιας-η2ε
      @ΣτεφανοςΚεχαγιας-η2ε 10 місяців тому

      @jesus_wtss rtx 3050 ryzen 5 6600H 32gb (2x16) ddr5 4800 and ssd. So not shitty at all my friend. I actually changed the settings a bit to get better graphics and I am still getting the same fps so...

    • @ne0bis
      @ne0bis 10 місяців тому

      @@ΣτεφανοςΚεχαγιας-η2ε rtx 3050 is a bit shitty tbh

  • @dakittgaming
    @dakittgaming 10 місяців тому

    Amazing video thankyou

  • @Trophy_Tracker_Nick
    @Trophy_Tracker_Nick 10 місяців тому

    You’re great but I wish you would’ve made this video when fsr 3.0 came out

  • @cyprowski
    @cyprowski 11 місяців тому

    Great video can't wait to try them out. Question for you my man... inverted commas? You mean quotation marks? haha

  • @b0saifq8
    @b0saifq8 11 місяців тому

    How do i know if my pc is cpu bound

  • @jordihendriks8733
    @jordihendriks8733 11 місяців тому

    my PR on resurgence was 15.. first game after i used these settings got 18 kills xd #already BIG thanks!

  • @benradley8256
    @benradley8256 11 місяців тому

    They've added FSR 3.0 with frame generation. That's the one to use

  • @zacharyadkins6606
    @zacharyadkins6606 11 місяців тому +2

    You said you were going to show us a better way to downscale our resolution that wasn’t in the game menu? Edit: this actually helped so much that I can play the game in 1440p now!!!

    • @Newtonheath236
      @Newtonheath236 11 місяців тому

      he only helps those with high tier pc not for us who doesnt hace the cash for that i have someone who i watch and he is much better

    • @Beardfish.
      @Beardfish. 11 місяців тому +1

      The FSR (now version 3.0 in-game) does just that. It is rendering the game at a lower resolution, then upscaling to your monitor's display resolution using advanced techniques. It is recommended to set the preset to balanced or performance, then turn off frame generation.

    • @zacharyadkins6606
      @zacharyadkins6606 11 місяців тому

      @@Beardfish. idk why but I’m getting way better performance with FSR1.0

  • @danielreyes5165
    @danielreyes5165 11 місяців тому

    I switched all my setting to this bc I was having issues and figured there were new setting, for the new season. These settings unfortunately made it worse for me. 50fps... not sure what to do, my game was fine when I first got on and now, I am getting 50-60fps...Hoping for some advice.

    • @ppnexus2000
      @ppnexus2000 11 місяців тому

      CPU bound, probably

  • @djangojosefssonfilmmaker3237
    @djangojosefssonfilmmaker3237 11 місяців тому

    I have gp 2070 super and i DId all step on u video but i still get 100 to 120 fps and i have 165 Hz monitor. Why is that ??

    • @KOSA1337
      @KOSA1337 11 місяців тому

      did u played on 1440p? Then its normal fps for your gpu.

  • @honza_boi6599
    @honza_boi6599 10 місяців тому

    i dont see fullscreen exclusive can u help me someone?

  • @whyyn0tt.
    @whyyn0tt. 11 місяців тому +1

    FYI I'm seeing AMD FSR 3.0 (instead of 2.1) as an Upscaling/Sharpening option with today's update!

    • @pjetreg
      @pjetreg 11 місяців тому

      Is there Frame Generation option?

    • @seibertron500
      @seibertron500 11 місяців тому

      that's because this upload is based on an old version

    • @Beardfish.
      @Beardfish. 11 місяців тому

      FSR 3.0 is good if you need more performance, just make sure you disable frame generation. Try balanced or performance presets.

    • @whyyn0tt.
      @whyyn0tt. 11 місяців тому

      @@pjetreg yes

  • @harleycummings8101
    @harleycummings8101 11 місяців тому

    I'd be lucky if i could load inro resurgence. Game gets stuck in a loop.

  • @imjody
    @imjody 11 місяців тому

    Crazy to me that you mentioned Path Tracing again, but AGAIN failed to mention that it only affects the main menu and shooting range... It literally does not affect your in-game performance, because it's not even on during gameplay. It's not a hard thing to clarify. Just do it. Path Tracing will probably be introduced in the next Call of Duty release; and this is simply them testing it out beforehand. A bit odd, but there you have it. It does look INCREDIBLE though.

  • @Mancave9999
    @Mancave9999 10 місяців тому

    tnk bro

  • @jedena399
    @jedena399 11 місяців тому

    Thank you

  • @rasenblazen7690
    @rasenblazen7690 11 місяців тому

    you are the best thanks :)

  • @danielgardner-w2z
    @danielgardner-w2z 11 місяців тому

    Please help!!! Graphics still won’t save

  • @b4b4Y4G4
    @b4b4Y4G4 11 місяців тому +2

    Do u noticed that the "eco mode preset" will always reset to efficiency everytime we start the game??never it will stay at custom

    • @teampenster
      @teampenster 11 місяців тому +1

      You need to change V-sync menus to off (or a setting in that list) which is what defaults it back to ECO.

  • @itsduckietime4473
    @itsduckietime4473 11 місяців тому +1

    If you have an AMD GPU, use FSR 3.0 in the Upscaling/Sharpening with AMD Frame Generation turned on. It quite literally doubled my performance with the RX 6650 XT.

    • @End0fst0ry
      @End0fst0ry 11 місяців тому

      Doubled performance and latency, yeah

    • @NPPusch
      @NPPusch 11 місяців тому

      ​@@End0fst0ry that's so nice. It doesn't work on my 2060 that good as on AMD. Have a 50% FPS increase on vondel and ashika (but not constantly) and no increase on urzikstan 😢

  • @amirarsalanrajabi-fn8gy
    @amirarsalanrajabi-fn8gy 10 місяців тому

    thanks

  • @JonnyRandale
    @JonnyRandale 11 місяців тому

    thx to you

  • @DiGz_Au
    @DiGz_Au 11 місяців тому

    youll get better and more consistent fps using w11 23h2.

  • @waltersng1065
    @waltersng1065 11 місяців тому

    Seems very same to last video nothing much changed then?

  • @wforall-p5l
    @wforall-p5l 11 місяців тому +1

    Respectfully man, i would have waited to post this video. Today was an atrocious day for the warzone/COD community 😔

    • @christianc.9216
      @christianc.9216 11 місяців тому +1

      indeed...

    • @FourEyesGames
      @FourEyesGames  11 місяців тому

      Literally makes no difference. This is an evergreen video for the entire season. No reason to wait.

  • @_SOCRATES
    @_SOCRATES 9 місяців тому

    I dont have full screen exclusive

  • @kucci8157
    @kucci8157 11 місяців тому

    Its weird, on my compter I dont have some of these setings in warzone...

    • @Ranch_Sizzle
      @Ranch_Sizzle 11 місяців тому

      Is your driver up to date ?

    • @kucci8157
      @kucci8157 11 місяців тому

      Yes, it said I have the most recent version.

  • @CloudsFPV
    @CloudsFPV 11 місяців тому

    You can play in 3rd person view in Zombies

  • @makeleyenda
    @makeleyenda 11 місяців тому +2

    Warzone crash
    Foureyes best settings

  • @BIGHEADjr51
    @BIGHEADjr51 11 місяців тому

    You obviously know what you’re talking about. 👍

  • @MrShalabii
    @MrShalabii 11 місяців тому +1

    They have added fsr 3 with frame gen i literally doubled my fps check it out four eyes !!

    • @lain-nz4sn
      @lain-nz4sn 11 місяців тому

      My fps also increases a lot with fsr3, however it is strange because I feel lag and tearing.. with fsr1 I have less fps but it feels smoother, idk why. I can't find information about it.

    • @MrShalabii
      @MrShalabii 11 місяців тому

      @lain-nz4sn because framegen increases input latency

    • @FourEyesGames
      @FourEyesGames  11 місяців тому

      Do NOT use framegen. Will ruin your latency

  • @Dr.Berbatov
    @Dr.Berbatov 11 місяців тому

    what about fs3

  • @m8b-MHD
    @m8b-MHD 11 місяців тому +1

    bro i loved ur vids ,but this vid was recorded b4 the update u don't have what we're looking for

  • @fatalsh0ck
    @fatalsh0ck 11 місяців тому

    Perché quando sparo con le armi intorno vedo dei quadratini? Aiutoooo

  • @destroyinggaming4life410
    @destroyinggaming4life410 10 місяців тому +1

    Since the new update nothing seems to work for me. My FPS is above 120 and I’m playing medium settings yet every server just seems to have aids. Like no lag until I’m caught in a gunfight and then it lags.

  • @Ranch_Sizzle
    @Ranch_Sizzle 11 місяців тому

    I’ve noticed much smoother game with variable rate shading OFF