ReBar/SAM is currently not recommended for AMD GPUs as it hurts performance for some reason, its probably not working properly. with it on, Urzikstan has drops (as low as the 80s) when looking into the middle of the map but with it off, I never drop below 120FPS looking from anywhere with my 7800XT. I noticed this first when the game launched in the Zombies game mode. this also happened in Vondel, where turning it off has boost in performance, but Al-Mazrah benefits from it.
If you read the information pathtracing + ray reconstruction it actuall says from memory that it only affects out of game graphics like character in pre lobby, menus and cut scenes and has NO affect on in game graphics.
Great video, as always. Tech Guides is one of the few (perhaps only) channels who actually shows what a setting does or doesn't do, rather than say 'trust me bro, put this setting to X'.
I just want to say that after messing with my settings and randomly selecting things because I was bored…..I always come back to this video to get things back in order 😊
Tysm 🙏 this is the ONLY video that has properly fixed my rig in this game. I was stuttering and chopping and frame dipping, with a 4090 that should NOT be the case. I followed your video and with some personal Nvidia filter settings, the game looks and runs absolutely incredible. I'm blown away. 💪💪💪
Im not one for commenting much on UA-cam. However, this video earned a like and sub. I have gained performance/increased fps following all your recommendations in the video. The resizable bar, i had never heard of, but I gave it a try, and it has definitely made a difference. Thank you for the testing you have done and the comparison for the different settings. You are my go to guy now for the optimisations. Keep up the good work. 👍🏻
The texture quality seems to have the single biggest impact on 1% lows in CPU bound scenarios. I have a 9550X with a Radeon RX 7990 XTX and that single change back one notch has improved my 1% lows between 20 and 30 FPS. Nice vid - thanks for showing the actual impact of the changes.
If I can recommend you a thing. To try run the game with DL DSR on 2160p. then use DLSS balanced to bring it back to 1440p. You will add so much clarity and detail with minimal los in performance.
very good video! i only discovererd you when mw3 came out,but damn you doin gods work, other youtubers fil their videos with 70% useless and unfunny trash so they can get more ads in their video., your videos are very chill,easy to understand AND u actually explain stuff or test it and then show us the results. soo keep up the good work ill bet u get 200k subs soon xd
I have been looking forward to this video, thank you for creating it so quickly, I have been experiencing bad stuttering in game. I will follow these settings and see how it goes. Will compare with and without resize bar
Great video. Would it be possible to make a video or recommend one about freesync/gsync, vsync and frame caps to improve screen tearing and input lag. Everyone says something different. That would help out tremendously.
Quick note: For someone that uses frame gen on PC it is absolutely worth it and does not effect your input latency at all it is a great way for more frames and it makes a huge deference recommend to turn it on :))
I frankly never tried playing with it. I guess if you have decent performant even without frame generation then input latency wont suddenly become horrible but it definitely can't improve it (unless paired with an upscaler)
Its really hard to benchmark on Rebirth since there are no safe spots where you wont get killed immediately... Much easier on Urzikstan in Plunder so I doubt I will ever be able to do one specifically for Rebirth
Thank you very much. I don't speak English, so I have to activate the subtitles to understand your explanations. I discovered your channel very recently and the effort is very noticeable. Thank you for such a wonderful job.
Thanks for the settings! Should I cap my frames at 170? I’m on a 170hz monitor. Edit: You said to use unlimited frames in the video. I’ll give it a try.
Hi Roman, I have to say that this video is just as helpful as the last COD optimization video, and I appreciate you providing me with the results of the tests so that I can better adjust them to my graphics card. Another thing I would like to ask you about is that the game has now introduced the FSR 3 feature, which allows all graphics cards to use frame generation, I wonder what you think about this? Would you recommend it?
Nvidia rtx3070 with intel i7 9700k tried with and without resize bar, fps slightly better with it on. not having bad drops when turning to centre of map.. optimised with your settings getting about 120 fps in the middle of the map and 145fps at the less dense areas, no stuttering now though thankfully. Using 144hz monitor so numbers are ok.Not as good as verdansk though.Thanks again for the guide
Thank you very much for your work. Do you have any tips to lower input lag on Warzone? I have an RTX 3070ti and i9 9900k and i am 100% gpu bottleneck. I tried to lower so many settings and i can't even lower it to 97%!
i noticed that in the benchmark of mw3 when i had reflex on it reduced the performance of my cpu just a few frames so i turned it off.....you want to have it on even it drops performance a bit right?
Thanks, made me drop from consistent 100fps to 54fps with constant drops to 1fps and no clue how to fix besides deleting config files all together. Don't apply any of these fixes if you have a low end PC.
Is there any chance we can get an updated dlss vs fsr video on mw3? since we have newer versions. Im very interested in the 4k performance/visuals if possible
Great guide, as always. Thank you! By the way, they finally impemented feature to separate multiplayer and warzone settings? (according to 00:30 timestamp)
@Tech Guides Hi bro! Thank u for the video.. Did u test disabling Hyper-threading if it increases FPS for cod? I have "Process Lasso" program and there is a option "affinity" to disable or choose which physical/virtual cores will perform the aplication/game. (Disabling Hyper-threading / Disabling SMT = only physical cores and no threads for the aplication.) i've seen someone saying it increases fps in warzone in the past, but i'm not sure.
Hey ,i had just made a new pc w newer equipment,and my cod is a stuttering mess .. it runs but every second it lags. Idk if you can help but im lost . 7600 cpu and gpu
Have you heard that the new CoD Black ops 6 will have ON DEMAND TEXTURE streaming ON at all times, without the possibility of disabling it, thus hurting performance? Any way to disable it with config files in the future?
@@turbokillerno worries make sure you set you Texture filtering negative LOD Bias to allow and your (Quality)to get the most out of any upscaling technique
With 5800x3d and 4080 gpu what would you raccmand Resizable bar on or off? Nvidia Low Latency On or On+Boost? And how much Virtual Memory scale (same as yours 90%)? I ask this because i am stuttering and i really cannot fix these problems
What do you recomend doing on the pc to make it more for playing games? I have removed bloatware and tuning on the AMD card. Are there something in bios i should do?
Hi! Help with plasticine buildings when entering sniper mode. I reinstalled the drivers, as soon as I did not change the settings in the game, I deleted the shaders. Installed on m.2, ddr5 32gb. Help me🙏
Hey! I just watched another video basically offering the same thing as this one. However in the call of duty file he specifically stated that one is specifically for modern warfare 3 and there’s a separate one for warzone. Can anyone explain or confirm that for me?
With the season 5 reloaded update you no longer have an option for on demand texture streaming to be off, it has to be minimal or optimized. Any idea what best to set it at for best performance or best quality?
I just did a quick test - expectedly I didn't see much difference in performance but minimal seems to yield slightly higher averages. Didn't have time to compare the visuals yet though
@@TechGuides gotcha, thanks! I figured optimized might be a little overkill especially for a mid range pc like mine. Thanks for the quick response, you’re guide has been the most detailed I’ve found, really appreciate it!
ReBar/SAM is currently not recommended for AMD GPUs as it hurts performance for some reason, its probably not working properly. with it on, Urzikstan has drops (as low as the 80s) when looking into the middle of the map but with it off, I never drop below 120FPS looking from anywhere with my 7800XT. I noticed this first when the game launched in the Zombies game mode.
this also happened in Vondel, where turning it off has boost in performance, but Al-Mazrah benefits from it.
Thanks for the heads up! I will soon be able to do testing on an AMD based system but until then I've pinned your comment for others to see.
yes i have 6900XT SAM is broken in many games recently wtf happening ?
If you read the information pathtracing + ray reconstruction it actuall says from memory that it only affects out of game graphics like character in pre lobby, menus and cut scenes and has NO affect on in game graphics.
Intel CPU and Nvidia GPU too! :(@@TechGuides
I have a 5800x3d and a 6700xt with rez bar ON and everything is fine for me..
Thank you for the information..really helped my performance and quality in COD...came from JGod video recommendation.
Great video, as always.
Tech Guides is one of the few (perhaps only) channels who actually shows what a setting does or doesn't do, rather than say 'trust me bro, put this setting to X'.
The game runs so smooth with these settings and is way better looking than playing on medium preset.
The kind man, Thank You.
I am here, hope the algorithm helps you! RESPECT!
never comment on vids or nun but u fr the first to acc show what shit b doin. u helped out big time. legend.
Appreciated!!
Literally the best guide on the internet because you provide graphs and screenshots. And it's criminally underwatched.
Thank you 🙌
I just want to say that after messing with my settings and randomly selecting things because I was bored…..I always come back to this video to get things back in order 😊
Absolutely killer guide but need to be updated, much love
Tysm 🙏 this is the ONLY video that has properly fixed my rig in this game. I was stuttering and chopping and frame dipping, with a 4090 that should NOT be the case. I followed your video and with some personal Nvidia filter settings, the game looks and runs absolutely incredible. I'm blown away. 💪💪💪
I also had stutter before, I wonder what setting is causing this
What resolution are you playing in? I have a 4090 with Ryzen 7 5800x3d and even with this configuration I'm stuck
Im not one for commenting much on UA-cam. However, this video earned a like and sub. I have gained performance/increased fps following all your recommendations in the video. The resizable bar, i had never heard of, but I gave it a try, and it has definitely made a difference. Thank you for the testing you have done and the comparison for the different settings.
You are my go to guy now for the optimisations. Keep up the good work. 👍🏻
Awesome, really happy to hear :)
After the season 1 reloaded update it seems they tweaked the performance of the game. Are you planning on making an updated video?
🙏🏼
Thank you! I followed your instructions and definitely gained FPS. Much appreciated!
The texture quality seems to have the single biggest impact on 1% lows in CPU bound scenarios. I have a 9550X with a Radeon RX 7990 XTX and that single change back one notch has improved my 1% lows between 20 and 30 FPS.
Nice vid - thanks for showing the actual impact of the changes.
Thanks for the insight!
If I can recommend you a thing. To try run the game with DL DSR on 2160p. then use DLSS balanced to bring it back to 1440p. You will add so much clarity and detail with minimal los in performance.
What is DL DSR?
My man!! I was waiting for this from you. You the GOAT!!
Simply the best optimization guides on this channel. Well tested and objectively explained, keep up the good work!
Much appreciated!
Hey you just got a shout out on JGODs latest settings video
No way!
You are a godsend. I had most of these settings done or close to what you said but I did all of them and now I have 30+ fps thanks.
very good video!
i only discovererd you when mw3 came out,but damn you doin gods work, other youtubers fil their videos with 70% useless and unfunny trash so they can get more ads in their video.,
your videos are very chill,easy to understand AND u actually explain stuff or test it and then show us the results.
soo keep up the good work ill bet u get 200k subs soon xd
The only guide who does the research!
Thank you roman you’re the goat.
Still waiting to the best sniper build!
Thanks man, really appreciate your continuous support!! I currently don't get much playtime sadly to test out builds but maybe over new year :)
Texture streaming makes a huge impact on youre weapon camos. You can go into the shooting range let it load and then disable it.✌🏻
Gotta try this one out, didn't see it impact my weapon without any camos
Thanks a lot i was secretly hoping for this video... commenting soo the algorithm always keep me updated
I have been looking forward to this video, thank you for creating it so quickly, I have been experiencing bad stuttering in game. I will follow these settings and see how it goes. Will compare with and without resize bar
3080ti and did every setting you suggested and the trees look like green cartoon cotton candy, can easily make out more detail with other settings.
Great video. Would it be possible to make a video or recommend one about freesync/gsync, vsync and frame caps to improve screen tearing and input lag. Everyone says something different. That would help out tremendously.
Let's goooooo. Been waiting for your video!
helped me a lot
By far the best optimization video I've watched so far. Well tested and equally well explained throughout, keep up the good work sir!
Thank you!
Quick note: For someone that uses frame gen on PC it is absolutely worth it and does not effect your input latency at all it is a great way for more frames and it makes a huge deference recommend to turn it on :))
Dlss3 Frame gen has terrible input lag. I wouldn't recommend anyone to use it
agree@@Voodoo.
I frankly never tried playing with it. I guess if you have decent performant even without frame generation then input latency wont suddenly become horrible but it definitely can't improve it (unless paired with an upscaler)
Can you please make a new video specifically for the Season 3 Rebirth Island, I am getting less frames on rebirth island
Its really hard to benchmark on Rebirth since there are no safe spots where you wont get killed immediately... Much easier on Urzikstan in Plunder so I doubt I will ever be able to do one specifically for Rebirth
Season 2 is here and there is some new settings. Is there a new video coming soon?
Potentially one day. Im busy with moving and getting everything set up again
@@TechGuides goodluck👍
Thanks!
It would also be interesting to see the perfomance difference in those settings if you are highly CPU bottleneck.
Yeah thats what my second system would be for but I had no time to re-do all the tests. Maybe another time :)
Thank you very much. I don't speak English, so I have to activate the subtitles to understand your explanations. I discovered your channel very recently and the effort is very noticeable. Thank you for such a wonderful job.
Wonderful thanks, I hope the automatic subs are good enough for now. I will check them tomorrow for accuracy!
Yesss I’ve been waiting for you to put out this video
Awesome!
I was impressed by ur wz2 vid. Now even more impressed with this thanks ❤❤
Soo kind of you 🤗
The testing is great
Thanks!
Man the game runs great for me. U are the legend!
Nice video!
I can finally enjoy the game with these settings. Thank you so much !
Awesome!
I would love a Nvidia Control Panel optimization video from you :)
Another great video. Thank u
Love these guides. Thanks!
My pleasure!
Your settings are always spot on! been following you since verdansk,
Awesome, happy to hear!
My game takes 5 to 10 minutes to load map textures everytime i land even after these settings. How to fix??
Could you test all the upscaling possibilites to check which one performs better?
I might make another one like this (ua-cam.com/video/-4GU_SZAGVg/v-deo.html) but they take forever to produce ;)
Does anyone know the location of that spot the the BR map at 6:32 ? , i think its in Urzikstan Cargo , am i right ?
JGOD brought me here!
This just made my day 🤯
Thanks for the settings! Should I cap my frames at 170? I’m on a 170hz monitor.
Edit: You said to use unlimited frames in the video. I’ll give it a try.
Hi Roman, I have to say that this video is just as helpful as the last COD optimization video, and I appreciate you providing me with the results of the tests so that I can better adjust them to my graphics card. Another thing I would like to ask you about is that the game has now introduced the FSR 3 feature, which allows all graphics cards to use frame generation, I wonder what you think about this? Would you recommend it?
Nvidia rtx3070 with intel i7 9700k tried with and without resize bar, fps slightly better with it on. not having bad drops when turning to centre of map.. optimised with your settings getting about 120 fps in the middle of the map and 145fps at the less dense areas, no stuttering now though thankfully. Using 144hz monitor so numbers are ok.Not as good as verdansk though.Thanks again for the guide
Amazing stats, tests and results!
Thanks for watching!!
Subbed and liked. Great explanations and comparisons.
Thanks, much appreciated!
Thanks just a nod to the algorithm
Damn glad i found u.
Jgød sent me here. 😏🔥💪🏻
Appreciate it
Thank you very much for your work. Do you have any tips to lower input lag on Warzone? I have an RTX 3070ti and i9 9900k and i am 100% gpu bottleneck. I tried to lower so many settings and i can't even lower it to 97%!
i noticed that in the benchmark of mw3 when i had reflex on it reduced the performance of my cpu just a few frames so i turned it off.....you want to have it on even it drops performance a bit right?
Yes
input latency is usually better than more fps so its reccomended to be on
@@wasdc so turn HAGS and turn on reflex? i know he mentioned you cant have both on but cant you really?
@@TheSouthForgoti heard having both on actually increases latency. i would reccomend only have reflex on, and ignore hags
@@wasdc thanks appreciate it ill give it a try
Thanks, made me drop from consistent 100fps to 54fps with constant drops to 1fps and no clue how to fix besides deleting config files all together.
Don't apply any of these fixes if you have a low end PC.
Is there any chance we can get an updated dlss vs fsr video on mw3? since we have newer versions. Im very interested in the 4k performance/visuals if possible
Will do sooner or later, currently busy with moving
I’ve been waiting for this Video from you 🥳🥳🥳
Great guide, as always. Thank you!
By the way, they finally impemented feature to separate multiplayer and warzone settings? (according to 00:30 timestamp)
Thanks for watching! From what I understand yes!
I can recommend this settings! Ive got like 40ish FPS more... thank you !
Awesome!
The config files (that you mentioned in the video) have parameters FSR 3, looking forward to it being added to the game!!!!
Hi TG,
Would you be producing an Audio settings guide for MW3/Warzone ?
Thanks
I've just started using the art is war audio wizardry. Dont think anything better is possible
@Tech Guides Hi bro! Thank u for the video.. Did u test disabling Hyper-threading if it increases FPS for cod? I have "Process Lasso" program and there is a option "affinity" to disable or choose which physical/virtual cores will perform the aplication/game. (Disabling Hyper-threading / Disabling SMT = only physical cores and no threads for the aplication.) i've seen someone saying it increases fps in warzone in the past, but i'm not sure.
thanku very much 4 ure work.....peace
You're most welcome!
the GOAT, thank you sir 🤝❤
We need a AMd GPU video 🙏
I build a system just for that, will do one soon :)
@@TechGuides I can wait 🔥🔥🔥
Another great video. Now I need audio presets lol
Yeah I would also be curious about some audio optimizations! maybe Ill do some tests over Christmas
Hey ,i had just made a new pc w newer equipment,and my cod is a stuttering mess .. it runs but every second it lags. Idk if you can help but im lost . 7600 cpu and gpu
Have you heard that the new CoD Black ops 6 will have ON DEMAND TEXTURE streaming ON at all times, without the possibility of disabling it, thus hurting performance? Any way to disable it with config files in the future?
What VRAM scale would you recommend with a 4080?
KING! Thank you for your videos and thank you for the job you do while making them. Answering all of our questions.
Thanks for watching!
Such an good vid!! Ty ❤
My game is so stuttery. Is there anything i can do? Or is it the servers. I didnt have stutters before
Are you going to come out with new setting for season 2?
Wow. I went from 70 fps to 130 thanks soo much man.
Happy to read!
my settings is not saving! idk how to fix this shit....
You're the GOD of Pc optimization, please never stop! 💪
I have the same monitor as you. Can you please tell me what brightness you use for your monitor?
great vid yo
Would love to see one of your guides on The Finals
Thanks, I got it also on the list :)
3:55 what about DLAA? Why is that no good?
DLAA more for quality not fps
@@teaubresaz-underhill6177 thanks :D i’ve made a few tests
@@turbokillerno worries make sure you set you Texture filtering negative LOD Bias to allow and your (Quality)to get the most out of any upscaling technique
@@teaubresaz-underhill6177 allow it is
Hm, variable rate shading reduces characters/weapons textures?
With 5800x3d and 4080 gpu what would you raccmand Resizable bar on or off? Nvidia Low Latency On or On+Boost? And how much Virtual Memory scale (same as yours 90%)?
I ask this because i am stuttering and i really cannot fix these problems
Can you do a video on the nvidia control panel settings for warzone? Plz
What do you recomend doing on the pc to make it more for playing games? I have removed bloatware and tuning on the AMD card. Are there something in bios i should do?
Hi! Help with plasticine buildings when entering sniper mode. I reinstalled the drivers, as soon as I did not change the settings in the game, I deleted the shaders. Installed on m.2, ddr5 32gb. Help me🙏
You know anything about this new setting for amd fsr the amd frame generation? seems like a scam like fake frames lol
could you do a video on the best nvidia control panel settings? i see so many different videos saying different things but i trust you lol
hi and when I have an i9 11900KF? please
tromendous work, i appreciate
Thank you!
Hello there!fantastic work once again...keep it up!
i have i7 9700K what about renderworker? 4 or 8?
Just wondering did you disable fullscreen optimization as well? Does it help with performance?
Hey! I just watched another video basically offering the same thing as this one. However in the call of duty file he specifically stated that one is specifically for modern warfare 3 and there’s a separate one for warzone.
Can anyone explain or confirm that for me?
There is indeed one called BR but its empty ;) just make sure to modify the options.4.cod23.cst file
using these settings ~ what fps should be expected on a laptop with RTX 4070 i9 13900 16gb 14 cores 8 performance cores 2560 x 1600 240 hz in warzone
Thanks for the video, great work! Could you also make one for the Finals? :)
Cheers! Yes I was thinking about doing one for Finals as well, likely will take a couple of weeks though
Anyone know what the program he uses to open his config file? mine is set to notepad but his seems a lot better to use
Its notepad++
@@TechGuides Legend, thanks!
Does enabling HDR introduce additional latency / issues ?
With the season 5 reloaded update you no longer have an option for on demand texture streaming to be off, it has to be minimal or optimized. Any idea what best to set it at for best performance or best quality?
I just did a quick test - expectedly I didn't see much difference in performance but minimal seems to yield slightly higher averages. Didn't have time to compare the visuals yet though
@@TechGuides gotcha, thanks! I figured optimized might be a little overkill especially for a mid range pc like mine. Thanks for the quick response, you’re guide has been the most detailed I’ve found, really appreciate it!
Amazing video! what are your thoughts on enabling HDR?
Thanks! Im afraid I dont own an HDR monitor an thus cant comment on that