My Simple Resin 3D Printing Process - From A to Z
Вставка
- Опубліковано 29 січ 2025
- Let me walk you through my process of how I 3D Print with Resin!
Thanks to @ElegooOfficial for Sponsoring today's video!
Elegoo Day Contest / Big Sale ➜ bit.ly/ElegooDay
Elegoo Big Fall Amazon Sale ➜ amzn.to/4gH0QgC
Neptune 4 Plus ➜ bit.ly/Neptune...
Neptune 4 Max ➜ bit.ly/Neptune...
New PLA Colors - amzn.to/3tKK24A
Mars 5 Ultra ➜ bit.ly/Mars5Ultra
-- now on Amazon - amzn.to/3Wmzzqv
Mars 5 - bit.ly/Mars5UJ
Saturn 4 Ultra ➜ bit.ly/Saturn4...
Saturn 4 - bit.ly/Saturn4UJ
Neptune 4 Pro ➜ bit.ly/Neptune...
Neptune 4 ➜ bit.ly/Neptune4
NOW ON AMAZON ➜ amzn.to/44kLsiJ
Alien Xenomorph Statue by ET ModelStudio
pixup3d.com/po...
/ et_modelstudio
Checkout MY PATREON / My 3D Printer Settings ➜ / unclejessy
Make your own Resin 3D Printing Timelapses with Resinlapse ➜
linktr.ee/resi...
Some links on this page are affiliate links that help out the channel.
________________________________________________
Buy Me a Coffee ➜ www.buymeacoff...
_______________________________________________
Gear I'm Using ➜ www.amazon.com...
________________________________________________
Twitter ➜ / unclejessy4real
Instagram ➜ / unclejessy4real
Facebook ➜ / unclejessy4real
UA-cam ➜ / unclejessy
________________________________________________
Thanks for watching!
#3DPrinting #resin3dprinting #Alien
Grab yourself some vallejo gloss varnish if you want the "wet look" :) just paint it on or airbrush it. You can mix vibrant colours for acid etc too :)
Exactly 👍🏼
Do you do that instead of curing?
@@anthonylong5870 Valejo is PAINT. you cure the model, you paint the model, you smash gloss varnish over the paint.
@@anthonylong5870 Nope, it's a top coat to go over the paint. It will also protect the drybrushed finish
@@HellstormWargaming awesome! Will be picking some up!
For a wet look, I use a brush on gloss coat. If I want dripping slime or blood, I use UHU Glue and pull strands of it, then use a transparent paint when it's dry.
When I'm gluing models of this size together, I refrain from using superglue unless it's just for small detailed pieces. I've had super glued resin prints randomly fall apart in my display cabinet a year or two after putting them together. I opt to use a 2 part epoxy (5 minute epoxy that I get at my local Dollarama) which makes for a very secure bond. Don't forget to scratch up the surfaces that you plan on gluing together.
Uncle Jessie painting skill has improved a lot!!
Thanks! Helps that this technique is easy to pull off 🤘
That is one completely badass model.
13:55 I've found that with a "wet look" is to use some minwax polycrylic varnish with a wide brush and applying liberally to the area that you're wanting to be "wet"
Great tutorial. I use Saraya Tech simple clear quite a bit and for best results I use Maguire's Plasti X polishing compound. All you need is a hand compound pad and a microfiber towel. You don't have to do any wet sanding beforehand and it's paintable with clear top coat. Another cool feature of the clear simple resin is I can custom tint with resin pigments.
will it remain translucent if you use transparent resin tints ?
Damn man! That turned out incredible. The painting you did really gave this a great final result. Love it man! Oh, and for the "wet look" you could mix up some 5 min epoxy, and put that around the mouth or areas you want, works really well.
Awesome model! Thanks for all the info uncle Jessy!
for your wet look use Pledge floor finish. You can even add paint to it to make oil washes, it self levels too. Also you could dip your clear resin part in it and let the excess wick off and it will make it go super clear, hope this helps!
Nice print, looking awesome, And for the wet look, you can use multiple options. Use a soft brush to brush on epoxy thinly. If to wet it will drip, and this will need a cure time. A other good option is with liquitex high gloss, use a soft brush and go over the whole thing. Dries pretty fast and leaves a very glossy shine. This stuff works almost on everything.
Thank you!! I’ve been struggling lately to get successful prints on my resin printer and this helped greatly
Great print! One helpful thing I have discovered is using Zona polishing paper as opposed to sand paper. The sand paper has a thicker back than the polishing paper and isn’t as flexible and easy to get into hard to reach and curved areas. Amazon has them and they are great!
Esto está genial! Y el estudio nuevo (no había visto ningún video en la nueva ubicación) está genial también. Felicidades tío Jessy!
Hey Jessy. If you wanna give it a 'wet look' then remove the clear skull covering and then spray the alien with 'clearcoat'..will make it look absolutely awesome 👍 well..even more awesome. Great print mate ❤
I made onevof these a while back but mine didnt have the separate skull cover and i painted mine with colour shifting blue/purple paint. I love it but sadly droped it the other day. I can fix it but now ive just seen your one i kinda want to do this one. You end result did really suprise me. It looks really good man. Great job!!👊🤘
@unclejessy, the reason the wet sanded one felt tacky is because resin does NOT like water, so even just the exposure via wet sanding introduced water into the resin, it soaks it up (and it can also easily deform resin prints but you got lucky with the shape of the print and the amount of water wasn't a lot), meaning that the resin tried to sweat out the water while the spraypaint was trying to dry, so it interfered.
IF you want to wet sand resin prints, maybe use clean isopropyl alcohol instead of water, that might sound weird but that's the safe method.
When I printed a Xenomorph, I didn't do any highlights/dry brushing but I did get a great wet look by hitting it with Rust-Oleum gloss crystal clear acrylic enamel spray paint. The whole thing has a very wet/glossy look and has held up for a year+ now.
Nice work and thanks for the work process you showcased. Now for some critique, I would have gone with that Smoky transparent black Head shield, i do think that had look so much better with the work you did on skull part, dulling it down a bit. If you look at the Xenomorphs they do not have clear skull shields they are a semi transparent Chitin which you can faintly see the skull texture beneath when the light hits it in the dark movies. And for some wet look you can go with a simple gloss varnish from the store and paint it on making it have that wet look, i would personally just do it on the most bright dry brushed parts of the model to give it a sheen as if lights hits the model.
Oh wow. This looks amazing! 😮
For prints like that, and aircraft canopies, we used to use "future floor polish" to get them REALLY clear. You can't find it anymore, but a newer replacement is called "QUICK SHINE".
You can find it at Lowes or Home Depot in the floor polish section.
A quick dunk, let it dry, and it retains that clear look very very well.
That looks awesome finished!! The painting topped it!! Man I want one!!!💯
Incredible work as always 👍👍
New to 3d printing, just brought the Saturn 4 ultra can't wait! Your videos are awesome!
for the dry brushing i would have used a more dark metallic blue which would give it a more slimy/wet look
Awesome. Perfect print and painting!
a good method for slimmy/goo is 5 min apox thinned with acetone. play around with it you can get some good drip areas that cure before they hit the ground
Well done. You could gloss or satin coat the rest of the skin to give it a shiny or wet look. I would probably do silver on the teeth as well.
Ive used a combo of Vallejo gloss varnish and you can get this adhesive called UHU, its a fast drying kinda stringy glue that you can use to make a dripping saliva effect
Gloss Varnish if you want it to look wet, couple mist layers, and last more heavy, but not too much to affect details
Cool video, I use gloss clear wheel lacquer on big prints/props and it's very hard and super glossy.
I've tried Polycrylic spray for clear coat and noticed it looked like it had tiny bumps all over from the spray droplets, so it was not perfectly clear. Then I tried brushing on 3 coats of Polycrylic from a can and that worked much better.
Uncle Jessie !! -- > You can color UHU glue with Citadel Technical Tesseract Glow (green) and make green slimey drips hang from its teeth and put it at some key points on its body for some alien gore.. 😉Maybe make some pudles on the base
Great model and Print ! 😍
That is SO GORGEOUS!!!! SOOOOOO good. This is a great video, you went through the entire process. A+ Content, sir!
I’m finding skipping the ipa wash and just going straight to curing station works great for small stuff, gunna try a big model soon
Looks so cool!!! How long did this take to print?
For the wet look, maybe use a black primer with a gloss finish to begin with? Then apply the dry brush layer after.
that looks amazing
Nice one man, you should make these total build videos more often!
I might have to try some of these process for a POTC Davy Jones print🏴☠️
Damn that looks sick!!!! Wish i had a resin printer Aliens is one of my favourite franchises. Good job jessy,
Wow I appreciate the skill! This is a lot of work & looks amazing!
That is incredible!
Fantastic as ever Uncle J Thank you For all your Hard and Dedicated work
For a wet loom you could jut add a thick gloss varnish or some thin clear uv resin for bigger droplets.
Only suggestion would be to hit it with some glossy clear coat for the wet look, minus the clear part. For that you'll want to use something else possibly an oil that won't make it yellow over time, as the clear coat might yellow on the clear part.
While #3 looks the cleanest and could be good for things like glass, I feel the #2 makes the most sense on this particular model because the bumps look more organic and what I would expect something organic grown on the head to look like. Our nails aren't perfectly smooth either. Thanks for different techniques that could be applied in different situations.
This is so incredible!!!! I am in awe!! Gonna try this too!
Citadel's ardcoat is my go to for 'wet' glossy finishes, but any other gloss varnish would achieve that slimey look
i love your Work!
you inspired me to buy and Print my self.
Thank you uncle Jessy
Thanks for this video awesome work
That looks so dope! Amazing job!
I always love the detail on resin prints.. and I always find myself looking at various statues etc. thinking man I would love to make that.
But the toxic nature of the chemicals.. the odor they apparently produce ( never been that close to one myself but EVERYONE seems to talk about it ) and the requirement for all that extra hardware ie. a curing station, uv station, and so on has kept me in fdm for now but who knows maybe some day. XD
awesome as always. again! 😀
that clear resin looks good! its giving me a few ideas on some new projects, thanks man
If you are looking for the wet look, the gloss finish or varnish can usually make something look wet. Matte and satin usually look better for clothes and sometimes skin, but wet is definitely gloss
Looks amazing!
That looks really awesome, how long did it take you to print all of the parts
Awesome video
Thank you for the excellent guide and information. The model turned out great!
Alien vs predator is one of my favorite franchises. I’m currently modeling a fugitive predator and my very first model was grid alien.
Will most likely at least go in and refine the alien since I didn’t know much about sculpting. Hopefully it’s not so bad I just end up redoing it
Looks great.
What a great project! Thanks for sharing with us all!
Thank you Jesse. I have been wondering about printing lenses for helmets, currently crafting a couple of Space Marine helmets,Titus's and a Chaplain. I'm conscious that it may cause eye damage. After watching i might stick to sheet materials for any optics
to get the wet look brush clear resin on the model and jhit it with a uv light....made mine look legit
Hey I really like modge podge hi - gloss clear spray. Super wet and glossy looking!
@UncleJessy as someone who does a LOT of resin printing, any plans on doing an alcohol vs water washable resin comparison video? I've just been searching for some to see which is better and not a lot of content about. 🤷🏼♂️
Awesome as always!
That is just stunning!!
Great work UJ
FOOOCKIN' INSANE @Uncle Jessy !!!! I love it.. I loooooove Alien ;)
Pick up some Villiany Wash Ink. They have a full set for I believe $75-80. It'll give you that creepy oozy look but Def pick up some Vallejo Poly Gloss varnish to fully lock it all in place.
Amazing video! Gorgeous model!
Good job! I love it!
Oh - forgot to ask, can you share a link to the dry brush palette? Thanks!
if you want a slimy look use some gloss varnish and uhu adhesive to make clear drippy strings
Awesomeness. I like printing in Resin but I always fear doing the supports wrong.
Gloss varnish will give it a wet look
Gloss varnish will get you that wet look. Just put some all over it and you’ll be golden, plus your paint job will be protected.
Woodland Sceneics Wet Effects, mostly used for water effects but could be used here to give a wet look. Or AK & Green Stuff World have slime time effect products that would give it that look
For that wet look try Mod Podge Acrylic Sealer Super Hi-Shine
Use a glossy varnish to get it shiny and wet
My god This is beautiful work.
Smoke tint the dome and give it a gloss finish. Trivia fact, H.G. Giger integrated an actual human skull behind the dome for the original 1979 movie costume. This detail is barely noticeable from the original film due to Scott darkening all the alien scenes to hide flaws due to time constraints in production. For the sequel James Cameron revised the alien dramatically and omitted the eye skull features and went with opaque domes.
H. R. Giger!
As a recommendation.. gloss coat it to give nasty glossy slimey alien feel... pin it to the base. Hole in the bottom (drill) and bit in the mini. Plug and play.
The base looked like it had lots of detail - did it require any supports?
I’d be careful with hollowed prints, you could end up having the print crack or explode due to interior not being fully cured. This happens because the uncured interior expands/contracts at a different rate to the fully cured exterior. If it does explode it can contaminate a large area with uncured resin which is not ideal if you have kids or pets, or for your own health for that matter.
Ideally try find a way to cure the inside of larger hollow prints.
thats amazing
Can you do a video on the pain that you use?
Would a clear coat then spray on clear varnish give it that wet slimy look?
Dang you clay!!! 😂 Amazing video
Just use UV cure resin clear like for jewellery making. Brush that on and then UV cure. Wet look baby! Also you can add globs and drops with it like out of the mouth etc. ❤❤
how much resin did you use for the full model?
About 2kg
@@UncleJessy thank you very much man!
What filament did you use for the base?
Hey uncle jessy why didn't you use the elegoo Jupiter se and print it huge? I would love to see you print a large sculpture on the Jupiter se.......
That is SO fire
As a longtime Alien fan, this is so sick.
This is probably the most incredible resin print i've seen yet. fantastic job
gloss varnish will ad a shiny ness
what was your expose time settings for the clear part? thanks
I can't tell you how many times I see prints on reddit with a big crack in them and resin dripped all over and they're asking "what happened to my print?"
No drain holes!