Making a Voice Activated Ironman 3D Print with Wifi and Leds | Groundeffected.com
Вставка
- Опубліковано 10 вер 2024
- I made my ironman 3d print with custom adresseble leds and wifi. This video shows you my build process, and covers some technical stuff but isnt a tutorial on wifi led setup.
⭐️Huge Thank You to My Patrons: / groundeffected
- groundeffected...
parts used in this video :
esp 32 board amzn.to/3Jhflta
the smallest power bank i could find on amazon amzn.to/3R5mChT (any power bank would work if it fits)
these leds are easier to work with amzn.to/3WEa95F
link to download WLED : install.wled.me/
link to wicked 3D : / 3dwicked
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected...
🎨 Supplies: elementgames.c...
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
....
vm.tiktok.com/...
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my UA-cam channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
TONY STARK WAS ABLE TO BUILD IT IN A CAVE!! WITH A BOX OF SCRAPS
I don’t even have a box of scraps!
😂
Love it. Mark VII is my favorite MCU suit by far.
Mine is mk 42 but screw painting all that gold.
@@Groundeffected Oh yeah that would be a real chore making all of that look right but I am sure you will get around to it eventually.
Quite simply amazing! Exceptional work! Thank you, sir!
Your videos are absolutely the best out there. Get plenty of , what is the word, oh, learning. Plus uhm, ya entertainment! Love it.
Wicked
Yes. From wicked 3d. Hahaha 🤣
Really sharp man. I know you hate to mask, but if did, you could mask off all the gold and silver areas on the suite, put down a thin coat of self etching primer and then spray the metalics. That insures the metalics stick to the gloss red underneath and the metalics would cover in 1 coat and go on buttery smooth.
Dude I regretted not masking so bad!! Especially for that gold. But you know I made a decision and I went with it. Definitely gonna mask next time hahahaha.
Absolutely amazing and epic. I’ve been waiting and looking for some instructional videos like this forever. Outstanding job
Sick!! Well if I get more requests for it I will make something more in depth about it. Feel free to ask if you have questions I’ll do my best to answer. Use the discord if you want, that way all the patreons can get the answers too and there’s something to come back and reference for later
I completely agree about the Tamiya paints... I live in Japan and ALL of the hobby shops mostly only carry Tamiya and Creos (Mr. This and That). I really love their clears but like you said they do not like being thinned however I did find that adding a little Mr. Color Leveling thinner helps a bit and does not change the color making it a bit easier to pass through the brush. Loved your work here.
Great video! Love the way Ironman came out definitely want to print and build one!! You also set my Alexa off at the end!!😂😂
Hahahaha that was the plan. Thanks for watching dude.
turned out well lad, the shop could do with some better categories though, wanted to check out paints but wasnt going to scroll through all pages to find them (or maybe i was being an idiot and that was there) Free razor back stl!!! I'll have that though
Yea dude. The website was built before I got to products and we are currently working on it as we speak. Will take a while though. Thank you for the feedback dude. I know we’ve got some work to do still. Definitely a better experience in store. But even still I’m still building up stock levels so there isn’t that much just yet.
@@Groundeffected deadly buzz man, I'll be getting into model painting at some stage soonish so expect to be sending parcels to Sweden 😁
Amazing work!!! I love your videos.
I've been waiting to see this!!! Hype mode for real
Catching up on the back catalog to learn, and support the channel. Be well be you
Wow that's very cool man!
Awesome Job.I got allot of pointers thanks. Got some clear red Tamiya thats been collecting dust. Got something to use it on.
I always watch to the end you bastard!!!! Epic build mate, epic!!
Hahahaha my most genius moment yet!!
LOL you just triggered my Alexa and it started playing "Never gonna give you up" auto troll
Absolutely amazing! You killed it man!
Thank you bro. Patreon video will go over the bottom decal in case you were wondering much love thanks for always supporting my dude.
Nice, awesome work, rc tank is badass too.. i just got done putting lights in the hulkbuster model off thingiverse with USB c charger.
Hell yea that sounds sick dude!!
Holy fecking shit dude that is incredible
Thank you my gee!!!
I watched this and decided to subscribe, then realised i already had! So i'll just thank you & instead send you a massive thumbs up from the UK! :)
you R awesome
I've used Tamiya Clear Red to paint Iron Man before, and yeah, you have to use a lot of coats to get that deep candy red color. I went through multiple bottles.
god damn this ting looks crazy. great vid man.
Thank you dude.
Legend.. 🤘🥰
Pass the Dutchy on the left.... haha
This is on my "to do" list along with the other 5 models in the series, however I went for the alternative pose where you can light up the hand blasters, something I may regret. Lol. Great video as ever.
Dude I looked at it. And thought 💭 🐬 that
That is really cool 😮
I've put LEDs in Iron Man before, but this is next level. Loving the content!!
Thanks dude.
Fukin hell went all out
That's awesome!!!
Outstanding Job Now that just a cool ass Iron Man enjoyed
This amazing, just discovered your channel and I love it.
Subed!
Thank you dude. And welcome
Daaaaaaamn, dude! This is sick! Gotta find the files on my drive somewhere and give it a go! 😍
That is incredibly cool, dude.
Great job Dad. Love that red! 😁
Cheer bud.
Dont blind yourself too bad
Thanks bruh!
I’ve been wanting to build and paint an Iron Man for some time, and seeing this video, I think it is time! Maybe some LEDs, too!
Sick as usual!
Hola, impresionante tu trabajo. Y gracias por enseñarnos tu talento. Saludos desde Argentina
Just found your channel from the AMAZING supergirl model you did and immediately subbed! Love the channel! You are Awesome and educational to watch! Keep it up!
D1 mini with WLED...the lighting powerhouse!
I used esp 32 and WLED what is this d1? I need to see if it’s cheaper and easier to find, I had to take this esp from an older project and now Alexa thinks ironman suit commands are how to control the mirror 🤣
@@Groundeffected a D1 mini is basically a smaller esp32. They are about half the size with same features! They have less pins but if using for only WLED....it's no big deal! My whole damn house is controlled with these gems bruh! Alexa ruined my life....but it's ok!😂 I learned about D1's and never looked back. I get mine off Amazon. Price wise...I can't remember. I'm getting older and shot out lol
@@Groundeffected change the name of the WLED device in the app. Then Alexa will recognize it as the name you give it by the way. You change name in settings of WLED ...under sync interfaces section towards bottom
nice video Jarvis lol
.thats one of the sickest prints Ive seen on the net
and Alexa love Rick Astley lol
Hahaha
You are awesome, love your videos 😊
Thank you.
Taking it to the next level bruh! 🔥🔥🔥
great video man!.
Very nicely done! That turned out really nice. 👍Long may your eyeballs burn out!👀
Tony: Alright, Plan B.
Jarvis: Sir, The Mark VII Is Not Ready For Deployment.
Tony: Then Skip The Spinning Rims, We're On The Clock.
Awesome as always
Really good except the smoke. It detracts from the beautifully done Ironman.
amazing
Incredible work, and super entertaining video! Thx forschte Share! You’re a true master of your work and I like it a lot that you show your love and passion for your hobby ☺️
Thanks a lot!
I might have to do this one. I've been wanting to do a Tony Stark snapping model to go with my Captain America and Thor Endgame models I've already made. I just wish Wicked3d would make one.
Wi-Fi-ron man!
Hahaha 🤣
That's cool and your ain't my dad you can't tell me what to do! I did share with my gran though.
That’s all that needs to happen share with your gran and all is well haha
Great Job!!!
Great video, can I ask where do your display cabinets come from are they the IKEA ones? Looking for something big enough to hold the large 3DWicked and B3DSERK statues
They are custom made. And the shelves are movable.
cracking bit of cheese grommit
Great video as always :D
Thanks again!
... I got Rick Rolled from an Alexa in another room. lol
The sticker o the bottom is decal paper or regular paper? How you make it?
Rick to the Roll!
Sweeeeeeeeeeeeeet !!! 👍👍👍
Dude didn’t know you had a physical store. Whereabouts? Could not find the info on your website! Amazing work!
It’s easy to find on the googs dude!
What the apple red brand ?
Very nice! How long did it take to print out the model? Thanks again, love your videos!
Mmmm about 10hrs
Awesome video dude! Thank you so much. Did you adjust the model files itself in order to make the space for everything?
Nah I just cut holes and drilled where I needed. Printed it normally.
My name is your dad ......wahahaha
which pins did you use to connect the LEDs to the board?
I’ll check tomorrow dude we had issues figuring out which ones but found them in the end. I’ll look when I get in the studio.
Although I won’t find this comment tommorow so drop me a dm on insta please
@@Groundeffected I figured it out. I put lights in the blasters as well. I'll share a pic when it's done. I appreciate you offering to look for me though.
What gold did you use?
I used monument hobbies rich gold. But I’m hindsight I’d have masked this and airbrushed this instead
I hope you get to keep blinding them eyeballs
Comment 11
First
Hello my Dad , I am your apprentice
Thank you very much for the very interesting, positive, informative videos. As a newbie I am delighted with what you are doing. Please tell me, is it possible to print a figure with moving parts from resin (something similar to children’s toy soldiers)?