Mustangs to Fear updated shelby style roll bar. Slither part 47.
Вставка
- Опубліковано 6 лют 2025
- Hey gang! In this video, I demonstrate the fitment of the updated Mustangs to Fear Shelby style roll bar. In part 20 of this video series, I struggled with an ill fitting bar that just wouldn't fit the car. They listened, and retooled and now...it fts! I test it in the cobra jet, and an original Mach 1.
Please LIKE and SUBSCRIBE!
/ jo_daddy
Mustang Restoration, 1965 Mustang Restoration, Mustang Sheet Metal, Mustang Bodywork, Classic Mustang Restoration, Classic Mustang Sheet Metal, MIG Welding, Spot Welding, dynacorn, paint and body, panel beating, how to, cool mustang,
#mustang #sheetmetal #restoration #howto #carjig #cartalk #mach1 #dynacorn #bodywork
Barry,
It was made to be removable. MTF has a video on the install on UA-cam. Weld the back plate then use the front plate to bolt in the rollbar.
Good point. I should have realized that. I tend to look at it as more than cosmetic.
Hi There
Those covers for the bases could be put on before you weld the bottom plates to the roll bar
Nice to see that you were listened to, and you probably weren't the only person that had this problem. I've learned a lot watching your videos. Thank you.
Awesome that they were willing to work with you on sorting this out.
Big up's to Mustangs To Fear 👍
A big shout out to you!!! One of many reasons I watch your UA-cam is your honest appraisals. Thank you for giving Mustangs to Fear a fair review. Please keep making your videos.
hi bbarry grate show .the mustangs looking good.👍👍👍👍👍👍👍👍👍😄
It is great that Mustangs to Fear reached out to you to correct the fitment issues you pointed out.
Awesome job. 🙂
Nice to see they made it right
Glad Mustangs to Fear listen to customer feedback.
That's pretty stand up for them to do that. This should net them some more business too !!
Nice bar and fits like I'd expect it to. Great to see them update the design and improve the product.
what a nice fit nice much better
I'm not sure Barry, but when you were inside the car it looked like a small part of the hardware kit might have fallen into the cowl? Like a washer or something.
I’ll check. Thanks.
Hard to believe they didn't fit the correct captive nuts for the seat belts. Almost all cars are 7/16 UNF except for some GM cars that had 1/2 UNC. What was the Dynacorn thread, 3/8 UNF?
Dynacorn was 5/16" coarse thread
@@JoDaddysGarage What were they thinking?¿???
They must have a .mustang in China it takes some time to get them to improve
Glad it wasn't a fishnet stocking leg lamp in the box. 😂
Good getting this all straightened out
Hi Barry. Sorry but to me its a fantasy bar , not a rollbar . First, the place where the plates should be welded , there is nothing beneath to hold the bar during an accident. I thought the rollbar was welded onto the rear torque boxes ?? Second, I prefer a full sleeve to connect the bar with its " feeth". Just my 2 eurocent.
It is a cosmetic roll bar for the most part. But I can see making it more structural.
Barry, not every Mustang is the same, there will always be some variation in them. You did enough crying to make them a little narrower for you 😂
😂 the footprint for the roll cage location is exactly the same 65-70. Never changed. Facts are facts. When I talked with their head engineer he agreed and found all the bars in inventory were made wrong. They couldn’t get them to fit their in house test car either. 💩
You can’t put the bottom bolt in from the opposite side?
It’s possible. Ir holes are drilled in the bar. It makes more sense to just weld it all.
They didn't redesigned the roll bar 😂
Actually, they fixed the design. Changes were made that greatly improved the end product. Thanks for trying to make a comment that almost made sense. 😂
@JoDaddysGarage you're sadly mistaken, they didn't change anything on it. Ask me how I know 😌
I don’t need to know. My measurements and end result revealed the truth.
@JoDaddysGarage All they was bring the sides. I sold thousands of them and you were the only that got a bad one. I guessing the way you whine, you must be a Liberal and voting for Harris 😅
😂 at least we know who to blame! It was a decent design, but something was definitely wrong. Better get some cheese to go with your whine.
Great joke. Don’t shoot your eye out kid.