Josh - we did update the bumper kit to include a camera relocation mount for the front camera on the 2020-2021 model years. It was just released. Part Number 3423160K2
Does the roof rack require any drilling or caulking to seal the holes on the roof? does the Summit front bumper work with the Toyota Tacoma sensors on the 2018+ models? how come you guys didnt show the summit rear bumper?
Do not know if anyone would read this considering how old the video is I am a big fan of your products although I wish you would make us so much bumper for the 2020 TRD pro‘s currently there isn’t one available I can put on my truck. And if you are talking to the head office back in Oz tell them we would love long-distance midship fuel tanks under our trucks just like are available for trucks in Australia as I live in Canada the second biggest country in the world and do a lot of long-distance driving sometimes I can drive over 700 km to work one way so long distance fuel tanks would be appreciated.
@@ARB4x4USA thanks I appreciate you forwarding it on hopefully it's something they do I think there would be quite a big market in North America for this kind of item. Will be watching closely to see if one becomes available fingers crossed
Hi ARB... Amazing assortment of products that were installed in that Tacoma.. I own a 2017 Taco myself and I wonder if you can please share the tire and wheel size. Thank you!
ARB, we struggle in Europe with regulations on the front bumpers. It could be simply solved when your products would be CE approved. Please could you sort this out so we can fit these stuff without any room for discussion. thx
If you are referring to the new TRD Pro then not right now. Toyota moved the sensor location low which interferes with our bumper. We have not confirmed it, but we think that you can swap out a non TRD Pro grille. Again, we have not tested this theory as of yet.
@@garricksreptiles2667 Unfortunately we don't have control when the OEs moves sensors. We can't relocated it without causing issues the factory system so the grille might be the only option. Toyota isn't the only OE that we have to work around sensors, some the Jeep models are the same.
Sorry, we do not make snorkels. We are only a distributor for Safari Snorkels out of Australia. For new product development, they require a high demand which unfortunately is not the case with the 1st Gen Tundra snorkel.
@@ARB4x4USA - 1st gen off road has these options: 1. ARB Safari Snorkel used on Sequoia in video: www.1stgenoffroad.com/store/p... 2. Cheap Knockoff Snorkel From Amazon: amzn.to/2Rw60k5
These options will work for the 1st gen Tundra as well: in video: www.1stgenoffroad.com/store/p... 2. Cheap Knockoff Snorkel From Amazon: amzn.to/2Rw60k5
Bought the ARB bullbar for my 06. Too bad I had to buy a off brand bumper for the rear. I guess you guys at ARB think it's all about the third gens. Well I'll take the 2nd gen with the 4.0 any day over one of those
Every time I see a snorkel on a off-road vehicle 98% of the time it’s just for show because that person doesn’t take it off road or use the snorkel as it’s intended for.
Yes, some people like just the look of the snorkel, but remember snorkels are very beneficial for dry climates as well. They are a true cold air intake, forcing the coldest, cleanest air possible into the engine causing a minor increase in performance. This is one of the reasons you see a lot of Land Cruisers in desert conditions with snorkels installed.
The finish on that bumper is NOT what comes on the bumper. My summit bar came with some half ass paint job that looks like ARB sprayed it on with a rattle can before sending it off to they dealer. I haven’t had it on for a full year yet and I’m already have rust issues with it. It’s definitely a tough bumper but you guys shouldn’t advertise things that you don’t actually provide.
The Integrit textured powder coat finish is a proven industrial outdoor powder coat that is designed to live in the outdoor elements in Australia. We have been using this coating for a few years now with not one rust warranty claim. If you are truly having and issue, please contact our tech department at tech@arbusa.com
ARB4x4USA cool, but you guys know better than most that true off road Clients just deal with corrosion and repair themselves. Yes, mine has corrosion as well.
Good presentation. My only gripe is the presenter is constantly going tttt ttt ttt ttt ttt ttt ttt ttt! STOP DOING THAT! IT'S FREAKING ANNOYING! A bad habit that's got to go! Makes you sound pretentious.
I really hope they update the summit bumper so its compatible with the new tacomas tss and front camera. Love the bumpers functionality and style.
Josh - we did update the bumper kit to include a camera relocation mount for the front camera on the 2020-2021 model years. It was just released. Part Number 3423160K2
It's funny to see American introduce an Aussie icon,makes me feel....proud I guess (:
Yeah but the channel is "ARB4x4USA" so that make it merican right? :p
Very informative, ARB makes great products
Love everything except the rear bumper. I'm not a fan of the tubes in it, but I really want the lockers, and the front bumper.
wow, I just happen to have a new tacoma and I am in the market for this kind of stuff, I'm starting with your lift but may use the yellow shocks.
Great spokesman. Give this man a raise
He sucks his god damn teeth every third sentence.
Not enough inventory in north America it seems. Also, why didn't you make your tire carrier compatible with the rear bumper?
Great spokesman, well spoken.
Love the bullbar finish, wish we had the Tacoma along with the Hilux.
Love the Hilux, but seems like all it really offers over the Tacoma for non-commercial use is a diesel engine option.
awesome video guys. thanks for those tips
This guy can sell anything
Does the roof rack require any drilling or caulking to seal the holes on the roof? does the Summit front bumper work with the Toyota Tacoma sensors on the 2018+ models? how come you guys didnt show the summit rear bumper?
Hi WiseSilverWolf, Here is a link to the website that has more info on all of the products for the Toyota Tacoma. arbusa.com/toyota-tacoma-2016-on
Just curious, how high is the lift? And, what size tires are those? That rig looks really good. 👍🏻
Will the front bumper work with the 2021 trd pro grill sensor
really really cool products but I bet that if I added all that stuff to my Tacoma it would cost as much as the Tacoma.
Fridges
No, not quite that much...However, for all, about 20% of the total cost of Tacoma.
Do not know if anyone would read this considering how old the video is I am a big fan of your products although I wish you would make us so much bumper for the 2020 TRD pro‘s currently there isn’t one available I can put on my truck. And if you are talking to the head office back in Oz tell them we would love long-distance midship fuel tanks under our trucks just like are available for trucks in Australia as I live in Canada the second biggest country in the world and do a lot of long-distance driving sometimes I can drive over 700 km to work one way so long distance fuel tanks would be appreciated.
We will pass this application request along to our product development team in Australia.
@@ARB4x4USA thanks I appreciate you forwarding it on hopefully it's something they do I think there would be quite a big market in North America for this kind of item. Will be watching closely to see if one becomes available fingers crossed
Will the steps part of the side rails do the same job as rock sliders? I’m assuming so.
Yes, you are correct.
Want the same products for the 2nd gen Tacoma!!!
Good luck
would a front locker work on a trd off road? with the crawl control system on or off?
Yes, the ARB locker will work just fine with the factory crawl control system and traction control.
4:44 don't call me Shirley
Hi ARB... Amazing assortment of products that were installed in that Tacoma.. I own a 2017 Taco myself and I wonder if you can please share the tire and wheel size. Thank you!
We are currently running LT265/70R17 BFG All Terrains.
@@ARB4x4USA Was there any lift with the ARB suspension to fit those tires? Thanks!
Please do this for the FJ Cruiser.
ARB, we struggle in Europe with regulations on the front bumpers. It could be simply solved when your products would be CE approved. Please could you sort this out so we can fit these stuff without any room for discussion. thx
Nice video Bud,looking well!
I have ARB's Linx system. Can the Linx be configured to activate the factory rear e-locker on the Tacoma TRD Off-Road?
Unfortunately, we can only confirm compatibility with our ARB Air Locker.
Does this bumper interfere with the front safety sense radar assisted cruise control on the grill of the 2020 Tacoma?
At this time we haven't had a chance to test it. We just picked up a 4Runner with the system for testing and will go on from there.
Is the summit bumper compatible with the factory TRD skid plate?
Is it compatible with the sensor in the front
If you are referring to the new TRD Pro then not right now. Toyota moved the sensor location low which interferes with our bumper. We have not confirmed it, but we think that you can swap out a non TRD Pro grille. Again, we have not tested this theory as of yet.
@@ARB4x4USA yall should really work on that. Really want this grill but the sensor is the problem from me buying it
@@garricksreptiles2667 Unfortunately we don't have control when the OEs moves sensors. We can't relocated it without causing issues the factory system so the grille might be the only option. Toyota isn't the only OE that we have to work around sensors, some the Jeep models are the same.
@@ARB4x4USA so what do yiu recommend I do ? Remove the sensor?
Do you have to order the integra finish separately?
I think all of them come with the finish now. I bought one of the summit bumpers in 2017 and it did not come with the integra finish.
whats the wheel and tire setup
make a 1st gen tundra snorkel please
Sorry, we do not make snorkels. We are only a distributor for Safari Snorkels out of Australia. For new product development, they require a high demand which unfortunately is not the case with the 1st Gen Tundra snorkel.
@@ARB4x4USA - 1st gen off road has these options: 1. ARB Safari Snorkel used on Sequoia in video: www.1stgenoffroad.com/store/p... 2. Cheap Knockoff Snorkel From Amazon: amzn.to/2Rw60k5
These options will work for the 1st gen Tundra as well:
in video: www.1stgenoffroad.com/store/p... 2. Cheap Knockoff Snorkel From Amazon: amzn.to/2Rw60k5
Link the roof rack
very nice video, awesome products as well i love the safari snorkel on my 2009 tacoma 👍🏻
ARB has amazing products, but don’t let them build your truck 😂
Please tell me what wheels and tires that rig is running?
Raceline wheels and Falken Wildpeak MT tires.
Bought the ARB bullbar for my 06. Too bad I had to buy a off brand bumper for the rear. I guess you guys at ARB think it's all about the third gens. Well I'll take the 2nd gen with the 4.0 any day over one of those
No link for the skid plates? I couldn't find them on ARBUSA.com
Just updated the links. Here is the press release - goo.gl/EE7iaB
Thanks! But that just shows the recovery point. Mistake?
Sorry about that, copied the wrong link. Here is the correct one - goo.gl/y64DKR
Thanks!
Info on the bed rack for the roof top tent? Please
The brand is Rhino Rack. Here is their website - www.rhinorack.com
Thanks!
What wheels are those ? What tire size ??
kseepersad2380 265/70 R17 BFG All-terrains
Hi guys... I missed the name and or size of the roof rack anyone know??
Hi Nick, its our rack and measures at 52" x 44". Here is the application guide for the Tacoma which has the rack part numbers - goo.gl/k1ICng
ARB4x4USA Awesome!! Thank you so much for the quick reply :-)
What kind of wheels are those? Tire size?
I know its been two years lol. But they are Falken Wildpeaks. The size is probably 285/75/R17
Informative video. Commentator could lose the tt..tt..tt..tt..... that's just annoying and pretentious.
Lmao... I read your comment and had to re-watch... Omg the ttt ttt.... annoying
bring it to Australia Toyota
Every time I see a snorkel on a off-road vehicle 98% of the time it’s just for show because that person doesn’t take it off road or use the snorkel as it’s intended for.
Yes, some people like just the look of the snorkel, but remember snorkels are very beneficial for dry climates as well. They are a true cold air intake, forcing the coldest, cleanest air possible into the engine causing a minor increase in performance. This is one of the reasons you see a lot of Land Cruisers in desert conditions with snorkels installed.
ARB4x4USA this is true but around me they’re only seen on pavement princess’ and mall crawlers
Out here in Australia we definitely use our snorkels mate!
That hook is WAY overpriced... everything else is somewhat fair and amazing quality. Can’t argue with the ARB quality and services
The finish on that bumper is NOT what comes on the bumper. My summit bar came with some half ass paint job that looks like ARB sprayed it on with a rattle can before sending it off to they dealer. I haven’t had it on for a full year yet and I’m already have rust issues with it. It’s definitely a tough bumper but you guys shouldn’t advertise things that you don’t actually provide.
The Integrit textured powder coat finish is a proven industrial outdoor powder coat that is designed to live in the outdoor elements in Australia. We have been using this coating for a few years now with not one rust warranty claim. If you are truly having and issue, please contact our tech department at tech@arbusa.com
ARB4x4USA cool, but you guys know better than most that true off road Clients just deal with corrosion and repair themselves. Yes, mine has corrosion as well.
I couldn't watch the video because the ttt ttt ttt between sentences drove me bonkers!!!
Thank you for the input, we have corrected it on current videos being produced.
Good presentation. My only gripe is the presenter is constantly going tttt ttt ttt ttt ttt ttt ttt ttt! STOP DOING THAT! IT'S FREAKING ANNOYING! A bad habit that's got to go! Makes you sound pretentious.
May not be a habit, but an involuntary tick...Hard to say.
Man he’s annoying.
Where can I get those side fender tubes for a summit arb bumper for a Tacoma 3rd gen
What size tires are those?
We are running 285/70R17 on this tacoma.