ATT: Please make the standard NRF24L01 Drone Transmitter first. Part-2 and Part-3 will make you easier to make. All links of schematic diagram and codes are available in video description. You can get it for free. (FREE for own use, commercial purpose and whatever you want 🥰, Please Subscribe and Share!) Leave a comment if you have questions! We're here to help.
what types of gps module have you got? GPS module is heavy to lift with our mini drone project. Multiwii has default pin to connect the gps module. You have to mention what type your gps moduel is, since not all supported by multiwii, specially, 2.3 version. If you know yours is supported by multiwii 2.3 or 2.4 version, you can connect it to RX and TX pin of arduino board. To make a video for that, I MUST buy the gps module first. Since the module is too heavy for our mini drone project, then I must upgrade the motor to brushless motors and ESCs. Of course, we will make it but not now (my budget is not good enough for that)
Enable/uncomment this in config.h file: #define i2C_GPS #define GPS_SERIAL 2 #define GPS_BAUD 115200 #define UBLOX pin wiring: VCC to VCC GND to GND Tx from gps to Rx2 on board Rx from gps to Tx2 on board NOTE: since you dont tell me the all details of specification of your diy drone, I cant give you specific config about that. But, the config I gave you is the standard config of your gps module.
@@wantedshark5165 you would never know if you dont do what I say yet. Just do based on my reply above. You dont try it yet, right? How do you know that it is working or not
@raycraft3990 yes, but you dont need to change anything in Transmitter code. Anything. Just click on ANGLE on AUX1 in multiwiiConf GUI although you dont instal AUX1
@@ArduJimmy Ok , thank you . You explained the changes required for a drone using a brushless motor, which is great, but could you also explain the changes needed to integrate GPS?
@raycraft3990 not now 🤣🤣🤣 as soon as I've got the brushless, I will make a video of NRF24 transmitter with that feature for NRF24L01 + GPS + Baro drone. Come on! we need many things to build a house even this channel ,😁🤣🤣🤣 we're going to rock n roll later. support me by sharing ardujimmy to make nice projects faster to come true, right? come! 🤭👍🔥🔥🔥
ATT:
Please make the standard NRF24L01 Drone Transmitter first. Part-2 and Part-3 will make you easier to make.
All links of schematic diagram and codes are available in video description. You can get it for free.
(FREE for own use, commercial purpose and whatever you want 🥰, Please Subscribe and Share!)
Leave a comment if you have questions! We're here to help.
Hey bro where is the receiver
I'm ready to fly my nrf drone with bmp180 with that TX 🔥🔥🔥
Nice! Insha Allah tomorrow I will make the video of training of the drone 🔥🔥🔥
Wow! cool 😂👍👍👍
Aw! Cool ! Love Ardujimmy
thanks soo much 😘😘😘🥰
Please teach how tô use gps with multiwii using Arduino
what types of gps module have you got? GPS module is heavy to lift with our mini drone project. Multiwii has default pin to connect the gps module. You have to mention what type your gps moduel is, since not all supported by multiwii, specially, 2.3 version.
If you know yours is supported by multiwii 2.3 or 2.4 version, you can connect it to RX and TX pin of arduino board.
To make a video for that, I MUST buy the gps module first. Since the module is too heavy for our mini drone project, then I must upgrade the motor to brushless motors and ESCs. Of course, we will make it but not now (my budget is not good enough for that)
@@ArduJimmygps NEO6MV2, I don't know which pins to connect in my Arduino nano
Enable/uncomment this in config.h file:
#define i2C_GPS
#define GPS_SERIAL 2
#define GPS_BAUD 115200
#define UBLOX
pin wiring:
VCC to VCC
GND to GND
Tx from gps to Rx2 on board
Rx from gps to Tx2 on board
NOTE:
since you dont tell me the all details of specification of your diy drone, I cant give you specific config about that. But, the config I gave you is the standard config of your gps module.
@@ArduJimmy How i know that is working ?
@@wantedshark5165 you would never know if you dont do what I say yet.
Just do based on my reply above. You dont try it yet, right? How do you know that it is working or not
AUX1 'S FUNCTION ?
To configure ANGLE and BARO. Without it, the drone can not fly
@ArduJimmy
If I don't use a barometer, do I still need to include Aux1?
@raycraft3990 yes, but you dont need to change anything in Transmitter code. Anything. Just click on ANGLE on AUX1 in multiwiiConf GUI although you dont instal AUX1
@@ArduJimmy
Ok , thank you .
You explained the changes required for a drone using a brushless motor, which is great, but could you also explain the changes needed to integrate GPS?
@raycraft3990 not now 🤣🤣🤣 as soon as I've got the brushless, I will make a video of NRF24 transmitter with that feature for NRF24L01 + GPS + Baro drone. Come on!
we need many things to build a house even this channel ,😁🤣🤣🤣
we're going to rock n roll later. support me by sharing ardujimmy to make nice projects faster to come true, right? come! 🤭👍🔥🔥🔥
Please send me code
Provided in video description
come to get that code ONLY??? what a creature you are 😂😂😂😂
And give me
Arduino drone recever code
you can check in the another video description in this channel! 🥰 Free!
Happy Making!