Makita grass shear DUM111 / 604 tooling change swap, hedge trimmer to grass shear visa versa.

Поділитися
Вставка
  • Опубліковано 3 жов 2024
  • Video shows what the manual is missing. Clear and straight forward drawings on how to swap from one tool to another. Video also shows what type of material you can cut with the hedge trimmer.
  • Навчання та стиль

КОМЕНТАРІ • 55

  • @robowen3450
    @robowen3450 2 роки тому +11

    Hi, just taken delivery of one of these. Spent over an hour trying to figure out changing the blades by following the instructions. Gave up and almost returned it. Watched your video and 10 minutes later I was in the garden trimming away. Thanks for a brilliant video.

    • @tanktankista3105
      @tanktankista3105 Рік тому

      Totally same happen to me.Thanks, mate.

    • @nickycarroll6778
      @nickycarroll6778 4 місяці тому

      Same for me. Instructions are totally crap. Had to watch video too.

  • @christianfoss7620
    @christianfoss7620 3 місяці тому +5

    Thank you , finally understood how to change blades thanks to you ❤️

  • @rexholloway1597
    @rexholloway1597 26 днів тому +1

    You are the man! I already sent one back thinking it didn’t work. The stupid instructions on this device were not very clear or the operator himself can’t follow instructions as well! But your video was perfect thank you so much!

  • @henriksundstrom9434
    @henriksundstrom9434 Рік тому +1

    I was warned that swapping tools on this one was tricky, but still needed this brilliant video to get it done. The usability engineers at Makita need to do their homework. Thank you!

  • @orrsomedavid
    @orrsomedavid Рік тому +1

    Well done Gerard. I bought my wife this tool as a present (and they say romance is dead). Makita though left me high and dry with a less than helpful tool change guide. Your clear guide however shows me what Makita engineers fail to achieve. Well done and thank you. My wife says thanks as well!

  • @DavoInMelbourne
    @DavoInMelbourne 8 місяців тому +4

    Thanks for this. The manual was hopeless 😄

  • @HenryFamilyTheFirst
    @HenryFamilyTheFirst 10 місяців тому +1

    Thanks Gerard, very helpful. Much appreciated. This definitely wasnt clear in the instructions.

  • @ragnarhilm5752
    @ragnarhilm5752 4 місяці тому +5

    The person writing manuals at Makita should be fired.
    Or me.
    Because nowhere was written “turn the crank upside down”.
    Thank you, sir.

  • @murraywalker9702
    @murraywalker9702 8 місяців тому +1

    Thank you. I was completely stumped before seeing this

  • @adamc3442
    @adamc3442 9 місяців тому

    Thanks Gerard, i fix tools for a living and we didnt have the manual available, your video was very helpful

  • @stephanetahiti8204
    @stephanetahiti8204 2 роки тому +1

    Merci beaucoup, c'est la seule vidéo avec une telle qualité d'explication.

  • @eTrainingInstructor
    @eTrainingInstructor 6 місяців тому

    Thank you :) I was fighting with this tool for 20 minutes. I'm happy I picked this video first!

  • @caro3526
    @caro3526 Рік тому +1

    Extraordinario tu video, sin decir 1 palabra, fuiste super claro. Gracias!

  • @freedo100
    @freedo100 Рік тому +1

    Thank you so much :-) This video was perfect. Makita should pay you for this !!!

  • @esisolina
    @esisolina 2 роки тому +3

    Thanks very much for your instructions here, the manual is not worth looking at, very confusing. Makita should pay you for these instructions :)

  • @daz1mc
    @daz1mc 9 місяців тому

    Great video. M a gardener and I was thinking of replacing my worn out Sthil version of the same tool with this Makita one.
    But after watching how much hassle it is to change over the blades, I’ll just get another Sthil machine. The blades just click in, and off again with the press of a button to release
    So much easier to change blades.

  • @michaelbayne9643
    @michaelbayne9643 8 місяців тому +1

    Thanks, this video was very helpful

  • @schultzsw
    @schultzsw Місяць тому

    The grass shear attachment would have to improve to be called “anemic”, and without these helpful UA-cam videos, I would still be struggling to change attachments. The hedge trimmer attachment is great at cutting grass, and for that reason I’ve retired the grass shear attachment… forever. My advice: buy this tool with the hedge trimmer attachment only.

  • @Jefe_Perro
    @Jefe_Perro 2 роки тому +5

    Thank you so much for posting this. The Makita manual is no help at all with switching blades, so poorly written.

  • @kaymgee08
    @kaymgee08 Рік тому +3

    Still finding it impossible to replace the cover at 2.14. I have lined it up but it will not attach when I turn it.

  • @H_o_g_a_n
    @H_o_g_a_n Рік тому +3

    exactly what i needed. the instructions are very unclear in the manual

  • @alecmacknight
    @alecmacknight 6 місяців тому

    Best video on UA-cam - can you offer to rewrite the instructions for Makita?

  • @RomainDelcoigne
    @RomainDelcoigne 11 місяців тому

    Thank you, it wasn't clear enough in the manual

  • @fernandogomes1178
    @fernandogomes1178 10 місяців тому

    Muito obrigado, não estava conseguindo colocar uma lamina por um simples detalhe , de inverter a manivela.

  • @BlueDroneBlues
    @BlueDroneBlues 2 роки тому +2

    I bought this tool and returned it the next day. It was just a complicated underpowered piece of monkey 🙊 💩. This is the 1st Makita tool that I was so disappointed with. I went for the Makita hedge trimmer next and it works like a little champ.

  • @Jones-xx2gc
    @Jones-xx2gc Рік тому +1

    Wish I had watched this before wasting 20 minutes of my life.

  • @demmgoodvideo3666
    @demmgoodvideo3666 Рік тому +3

    for your safety.. remove battery first.. then work on the tool

  • @timvanderbruggen1573
    @timvanderbruggen1573 Рік тому +1

    Thanks for the info

  • @alanh6956
    @alanh6956 Рік тому

    This video is so helpful

  • @billroche5264
    @billroche5264 7 місяців тому +1

    Thank you! 🙏😊

  • @lexb
    @lexb 3 місяці тому

    Спасибо тебе добрый человек. Я из оригинально инструкции не понял что шатун надо перевернуть. Не мог понять почему не встает в паз насадка.

  • @PedroKV
    @PedroKV 2 роки тому +2

    Is it worth to buy? It seems that a bit thicker twig will stop it. :-/

    • @Gerard_Hugo
      @Gerard_Hugo  2 роки тому +3

      That is true. The grass cutter is useless (better buy a Makita graas trimmer with a nylon cutting wire). The hedge cutter lacks power but I use it sometimes for thin twigs with one hand operation. But better buy a real hedge cutter. So I would never buy this product. I got it for free together with a battery powered Makita grass trimmer.

    • @PedroKV
      @PedroKV 2 роки тому

      @@Gerard_Hugo Thank you. I think I will take this item: Makita DUH523Z. My wife want some aid instead of manual scissors for trimming "Cotoneaster dammeri", which has up to 10-15mm twigs. As reviewers wrote, 1cm twigs cuts with no problem.

    • @Gerard_Hugo
      @Gerard_Hugo  2 роки тому

      @@PedroKV Seems as a good choice. Gerard

  • @V0udka
    @V0udka Рік тому

    You saved my day with this video!
    What pliers did you use? I'll need to buy one and I'm unsure which one will do the job.

    • @MattCooperWright
      @MattCooperWright Рік тому

      You can just flip it out with a screwdriver too. In fact I used a teaspoon to do the job 🙌

    • @lorenzovillegas2457
      @lorenzovillegas2457 5 місяців тому

      Look like needle nose pliers

  • @aussie8114
    @aussie8114 8 місяців тому

    Good tool for road rage defence.

  • @fmeyer
    @fmeyer 4 місяці тому

    Thank you sir.

  • @osocarpinterocarpinteria
    @osocarpinterocarpinteria Рік тому

    How good until now?

  • @mateko2128
    @mateko2128 4 місяці тому

    Beste MAN 👍👌

  • @Марина_К
    @Марина_К Рік тому

    Благодарю! Хороший обзор!

  • @trevorclarke147
    @trevorclarke147 3 місяці тому

    Helpful thanks

  • @jameslatham9460
    @jameslatham9460 Місяць тому

    Go gerard 💪

  • @chachou5195
    @chachou5195 6 місяців тому

    Merci pour le tuto sas toi je n'y serais pas arrivé !!! 😅

  • @Lenmil
    @Lenmil 6 місяців тому

    Great, cheers.

  • @medeo9813
    @medeo9813 Рік тому

    Thanks a lot.

  • @damianszymanski7326
    @damianszymanski7326 Місяць тому

    Dziękuję

  • @whitesnake192
    @whitesnake192 2 роки тому +3

    This is a terrible tool from Makita, it is too heavy with the battery to be operate with one hand.
    Changing of blade is terrible while other brands just snap-on
    I returned mine right back no more Makita

  • @bltefft
    @bltefft Рік тому +2

    too much trouble.

  • @brendangair2023
    @brendangair2023 4 місяці тому

    Worst hedge trimmer ever….i have an old 12v black and decker is far more powerful. I have tons of 18v Makita tools that work great, this is my worst. I can trim new boxwood growth, very soft. That’s it.