F150 Water Pump and Thermostat Replacement

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • 2002 F150 5.4 Liter V8 Lariat Super-Crew Water Pump and Thermostat Replacement.
    DIY and Save!!
    My heater wasnt working so I went and replaced the water pump and thermostat and they were in very good condition...I already took it out so i replaced them. The resolution was a radiator flush!! However I had a good time filming the replacement of the pump and thermostat!! DIY and SAVE!!
    Please subscribe and comment

КОМЕНТАРІ • 18

  • @sespider
    @sespider 3 роки тому +3

    That looks like a '98 model, like mine.
    Why did you not remove the fan cover and radiator hose? Would have made your life a heck of a lot easier. ESPECIALLY with a stuck water pump.

  • @mikespeck8642
    @mikespeck8642 3 роки тому +1

    What year is your truck

  • @hungrymanevony9400
    @hungrymanevony9400 4 роки тому +1

    sounds like tow music :)

    • @PinoyBBQ
      @PinoyBBQ  4 роки тому

      I had to look up TOW music--Japanese fiddle music? Thanks for the comment and view! please hep a brotha out and subscribe. :)

  • @bellawright4265
    @bellawright4265 5 років тому +1

    Has a rubber O ring...put some oil on the o ring before installing.

  • @docnez8562
    @docnez8562 4 роки тому +1

    Why did you change your water pump in the first place? Symptoms ??

    • @PinoyBBQ
      @PinoyBBQ  4 роки тому +1

      I was having an issue with my heater and part of troubleshooting replaced it. Turned out to be a blend door. I live in Texas so only about 1 month it’s unbearable I deal with it. AC is a work horse for the other 11 months of heat

  • @erichansen9108
    @erichansen9108 5 років тому +1

    letting anti-freeze spill on the ground? messy!

    • @PinoyBBQ
      @PinoyBBQ  5 років тому +1

      I didn’t do that!! I captured it in a pan colored as the concrete i disposed of it appropriately !!:)

  • @billymettlen219
    @billymettlen219 6 років тому +1

    Did it not come with a gasket

    • @PinoyBBQ
      @PinoyBBQ  6 років тому

      Billy Mettlen I don’t remember what Timestamp you looking and I’ll try to remember.

    • @billymettlen219
      @billymettlen219 6 років тому

      Im replacing my water pump and it came with one. I was watching your video and didn't see you you use one. Just the the inside seal.

    • @PinoyBBQ
      @PinoyBBQ  6 років тому

      Please dont forget to subscribe!! I did not use a gasket and my kit definitely did not come with one...hmmm I looked at vid and at exactly 3:46 and 3:49 I dont see a gasket either. It would have come out when I disassembled it. I dont recall scrape-ing it either. I can tell you that I do not have a leak whatsoever.. if you have a gasket you should use it!

    • @MarcoAntonio-rc9sd
      @MarcoAntonio-rc9sd 6 років тому

      Billy Mettlen hello I have one question, after I idle my Ford F-150 4.6l automatic for 3-5 minutes the upper radiotor hose doesn’t get warm, I’m talking about the big first hose you see when you open the truck, after a 15 minute drives it’s hot but I believe that is jus the engine heating it up

    • @shakysliders1689
      @shakysliders1689 5 років тому +3

      The o-ring provides the seal. No gasket required on this type of water pump.