@@PlatoonGarage thanks yeah that setup looks mint, 👌 that's the specs I have been on the fence about that or 10.5 but that spec definitely have to roll fenders just don't wanna hack the body up.
@@bohemianraceart a lot also has to do with the ride height and tire width. These Advan tires are 265, but actually measure out a bit more like a 275. A guy locally is running a 10.5 + 15 and 265 a bit higher with no camber and his doesn't rub. Just be prepared to make adjustments to get the fit you want 👍
so the cusco arms naturally gave you -2.5 on one side and -2.3 on the other? seems like it balanced the camber out from a 0.5 deg difference. Did you have other means of camber adjustment on the front?
Correct, the -5mm arms give roughly neg 2.5 degrees camber. No other camber adjustments were made. One thing I noticed taking the stock arms off was the bushing on one side looked like it had been mangled a bit. Maybe the GTR shop that installed them before damaged them putting in the bushes.
Stance and car looks great, glad you didn't have to roll the rear. What are the wheel specs 🤔 just curious.
Thanks, I'm glad I didn't have to modify the body too.
Wheel specs are 18x9.5 +12
@@PlatoonGarage thanks yeah that setup looks mint, 👌 that's the specs I have been on the fence about that or 10.5 but that spec definitely have to roll fenders just don't wanna hack the body up.
@@bohemianraceart a lot also has to do with the ride height and tire width. These Advan tires are 265, but actually measure out a bit more like a 275.
A guy locally is running a 10.5 + 15 and 265 a bit higher with no camber and his doesn't rub. Just be prepared to make adjustments to get the fit you want 👍
Can you confirm 18x9.5 et12 and 265/35 tires will clear front fender using this camber arm?
It did on my car. That's what I am running now
Thank you, very helpful 👍🏼👍🏼
Doese the camber arms alone effect other alignment settings?
I my car has been aligned but I was wanting to ad camber arms.
R32 also.
If adding camber arms you will need to reset the toe. If you have adjustable tension rods as well, you might have to adjust caster
I need to install mine
so the cusco arms naturally gave you -2.5 on one side and -2.3 on the other? seems like it balanced the camber out from a 0.5 deg difference. Did you have other means of camber adjustment on the front?
Correct, the -5mm arms give roughly neg 2.5 degrees camber. No other camber adjustments were made.
One thing I noticed taking the stock arms off was the bushing on one side looked like it had been mangled a bit. Maybe the GTR shop that installed them before damaged them putting in the bushes.
@@PlatoonGarage Gotcha, I just ordered the adjustable GKtech upper arm...to replace my stock one whicb also have nismo bushing recently installed
@@haiboj4979 👍
Be careful with the gktech front upper arms, I've heard stories of failure and them coming loose
@@PlatoonGarage I have ordered from tfworks with upgraded aurora bearings, hopefully it will be ok
@@haiboj4979 that's definitely the way to do it, I get a lot of my gear from tf works.
Let us know how the install goes