How it's made citroen c5 infinity mirror led tail light
Вставка
- Опубліковано 6 гру 2019
- mirror reflective stickers www.aliexpress.com/item/32682...
two way mirror film tr.aliexpress.com/item/330181...
smd3014 led tr.aliexpress.com/item/323232...
#AzcCarStyle #HowItsMade #LedDesign - Авто та транспорт
2 weeks later 8 Led's are Off and The rear light is full of condensation.
Apart from such problems, your work is absolutely phenomenal
Condensation from where? He sealed the lights up perfectly there's nowhere for water to get inside
@@stevenw973 You have No Idea my friend :-)
@@stevenw973 condensation happens not only when humidity varies depending on weather conditions (rain or not) but also with atmospheric pressure and temperature changes throughout the day added to the heat generated by electronic components in a sealed enclosure. I have had an IP65 electronic box filled with condensation water even though it was completely sealed. You need to have valves to allow hot air to go out in order to avoid condensation. The air you trap when you seal the case has a certain amount of humidity and depending on the temperature, this water will change state from vapor to water and even ice.
with little hole on bottom , no problèm
That makes these lights the most expensive part of the C5!
the engine: am i a joke to you?
But it is better like a crap china Plastic VolkshitWagen
I don't think so, car prices are very high in turkey
@Lassi Kinnunen Parts, Service and repair costs for an 2010 Mercedes is much more expensive - Trust me, i sale Automotive parts and work in Car Service. Citroen Diesel Engines are one of the most reliable (except 2.7 V6, witch was a Ford engine)
cakone micke because VW is build in China... yes very nice argumentation! Cars from the US are even cheaper.
That has got to be one of the coolest things I've seen! Gonna get a spare set and try this
6:18’de “Ben bu işi yapıyorum yahu” bırakışı şahane 👏🏻😂
I’m amazed. You’re an expert in an art I didn’t even know existed - car jewellery!
I'm glad there's at least one video of this process, since I'm planning to do this to my own car. Still saving for a set of rear lamps though...
Emek kokuyor resmen bir insanın her işimi mükemmel olur, ustam keşke istanbulda olsaydın benim aracı da yaptırırdım :(
8:42 Nice work on just pulling a single power wire for each set of pads. I will need to remember this. Thanks for the tip!
this can be a startup already, best tail lights i've seen
It's actually an already known technology, invented by the company I work in (Valeo Lighting Systems), which made these specific tail lights, as well as some other "3D effect" tail lights, for Land Rover for example.
Hipnoz etkisi yaratıyor yeminle izlerken gözleri ayıramıyor insan helal olsun sana! 👏👏👏🤙
Arkadan vuran aracın şöförünün kaza tutanağı açıklaması : Hipnozdaydım 😀
@@deliasmysis4876 hahahahah
Ne kadara yaparsın bunu
Great workmanship and looks drop-dead gorgeous!
It's hilarious how easy this seems to be when a professional does it. A joy to watch!
why I'm watching this, I don't even have a car, lol
cause it is nice ART
You don't need a car to appreciate craftsmanship.
But you will have it soon!
Lol
you can make infinite mirror christmas tree lights instead!
I've told you already in other video. Man, you're too good at what you're doing..the best so far. Clean and perfect work.
@THEMenelouss Time to move countries buttercup.
@THEMenelouss what country would that be exactly. I replaced my brake lights with custom digital screens and have had no problems at all. As long as u have red amber and white turn on when they r suppose to u r good.
@THEMenelouss damn dude that sucks over here its way different as long as the light is visible within 500ft you are good and we have no headlamp restrictions over here. My lights are so bright i can see for a mile lol
@THEMenelouss person who runs into you has to know that thees lights have no homologation. Who sais that they arent aftermarket lights with homologation?
For TÜV you use original rear light, After TÜV reuse theese
If you end up in crash, Use original lights if inspetion comes in.
And.... you can print all kinds of marks on lights if you want.
And idk if that dude was trying to bash me at all with the whole civilized talk but i own show cars and drive them. I have never had an issue.
Sen işinin tam hakkını veren bir sanatçısın.
Ustam 4 saattir videolarınızdan çıkamıyorum baktıklarıma tekrar bakıyorum defalarca heleki bu c5 tam bir efsane Benim araçta c5 keşke fırsat olsada sizinle tanışanilsek ellerin dert görmesin vallahi brawo 👍👍👍
Que hermoso y espectacular trabajo, yo hace mas de 10 años ya supe modificar faros de vehículos viejos a LED, pero esto ya superó todo lo que imaginaba, he intentado hacer algo similar, pero no me daba idea de cómo resolver algunas cuestiones, FELICITACIONES, esto me inspira a hacerlo en mi vehículo. Realmente que trabajo profesional y prolijo, como así también muy artistico. Saludos desde Argentina.
As
this is real art, would be proud to drive with these, only i have a citroen c4 :-(
This is an insane amount of effort no "normal" person would copy on their own! You must be a dedicated car appearance fanatic to dedicate this level of time, effort and imagination to achieving a single illuminated effect!
Arkadaş bu nadıl bir emek nadıl bir zihin uğraş,, yapan belli li zevk alıyor bu işten hey maşallah sana
These tail lights look fantastic! I love how you integrated the double mirror effect for them. Awesome job! A sequential turn signal would be great on them, but they look great with the static one too.
A sequential would ruin them, actually...
@@Fas7Blas7 Not at all, sequential is badass.
@@mitchellcamps7595 Everyone has his/her taste preferences 😊
IMHO sequential turns are too fancy, but everyone has their taste.
I thought the same thing while watching. I think that the sequential would look great
Безумно красивая оптика! Спасибо за видео, загорелся желанием сделать подобное на своей ауди)
перевод названия видео еще лучше)
РАЗБЕРЕШЬ, ПОТОМ НЕ СОБЕРЕШЬ))
один вопрос. перегорела лента светодиодов, что дальше?
@@youbertuber8109 разбирать и менять ленту
@@user-hy5hb4hh8e в том-то и дело. Это геморрой. Я не сторонник непрактичных вещей.
Wow this seems so pain stakingly tedious but for this one of a kind build it was def worth it.. big win bro
Meus parabéns por este trabalho incrível. Você fez uma joia! Seria incrível se a original fosse assim...
EXCELLENT VIDEO!!!! I missed the last few you posted (but I caught up quickly) but as always thank you for sharing your talent and the great tutorial and parts used!!!!! I have said it once and I will keep saying it....you are like a surgeon with that Dremel attachment!
I have seen these taillights and I was always curious how they were made, and you came through with the cutting edge tutorial thank you!
Abi izlerken o kadar hayran kalıyorum ki emeginize sağlık 👏🏼👏🏼👏🏼👏🏼
Incrível. Parabens pelo excelente trabalho de arte.
Beautiful work ! I love the C5, especially with hydropneumatic suspension. Would enjoy seeing your lights installed on the C5.
Thank you for sharing your hard work.
Yo! You've got mad skills bro. That's 🔥🔥🔥🔥.
Everyone: Wow awesome lights!!!
TÜV: .......
oh yeah, probably should put a tl:dr here:
Not really a problem as long as you find a way to incorporate a red reflector or mount one elsewhere on the back of the vehicle.
well, lets see i guess:
StVZO §53: Schlussleuchten, Bremsleuchten, Rückstrahler (Tail lights, Brake lights, Reflectors)
(1) The lowest point of the illuminated area must be higher than 350mm off the ground and the highest point cant be higher than 1.500 mm.
- Since we arent changing the position or shape of the lights, this one is irellevant
(2) Vehicles and their trailers must be equipped with two sufficiently bright brake lights at the back that activate upon using the brakes. Brake lights have to be brighter than the normal tail lights.
- Its difficult to tell in the footage at the end imo, but the tail lights should probably be a bit dimmer to be on the save side, other than that or if the person doing the inspection is chill, shouldnt be too much of a bother
(3) removed
-...
(4) Vehicles must be equipped with red reflectors at the right and left side. The outmost edge of the reflective surface must not be further than 400 mm from the edge of the vehicle and their highest point must not be higher than 900 mm off the road.
- Biggest problem right here. Correct me if im wrong but i didnt see any reflectors on this build, so it would either have to be altered or reflectors would have to be mounted somewhere else on the back of the vehicle. Unless you can find a black reflector that still shines a red light back, this would be tricky to implement without ruining the look.
(5) mandatory Tail- and brake lights as well as reflectors must be mounted at the outmost back edge of the vehicle
- cool? again, we arent changing the position of the lights, so nobody cares.
(6) 1 and 2 do not count for propulsion or industrial vehicles with a single axle
- not sure how to translate that, but it doesnt matter either way since we are talking about a normal car with two axles
(7) deviations from 4, sentence 2 are only allowed on farming or forestry vehicles that purely drive behind other vehicles
- once again, irellevant for us here
(8) vehicles being towed must have tail, braking and indicators activated
- not sure how this is even supposed to work but it doesnt matter for us here since we dont loose any functionality of the original lights.
(9) tail lights, braking lights and reflectors cannot be mounted on movable vehicle parts. exceptions are made if the mounted light is in addition to a sufficient fixture on the main body of the vehicle
- say it with me now: irellevant
(10) My god thats a lot of jargain .... ummm ... vehicles of the classes M2, M3, O2, N2, N3, O3, O4 (trucks, transporters and other long vehicles) are required to have yellow or white lights scattered along the left and right side of the vehicle
- nobody cares
@@fenchellforelle Und, was hat der TÜV gesagt?
@@dasgehtdichnichtsan1895 alles nur theorie haha
wenn einer es wirklich probieren will bitte aber ich habe keinen citroen c5 also kann ich nur von dem ausgehen was im gesetz steht oder ich in meiner kfz'ler ausbildung lerne
Bauliche Veränderung eines Bauartgenehmigungspflichtigen Bauteils ist ein "no go" und führt zum Erlöschen der Betriebserlaubnis des Fahrzeuges. Schaut drauf, leuchten haben Prüfzeichen. Eine Abschlusscheibe mit Prüfzeichen ist auf jeder Lichttechnischen Einrichtung zu finden. Du änderst nichts an der Anbaulage daher sind die Maße irrelevant da sie nachher so sind wie zuvor.
@@fenchellforelle Not right. The parts changed their kind of lighting. The colours, brightness, angles etc. are approved by the (E) symbol (by ECE) in the range it was produced. If u change something inside it's not any more the (E) what it was approved for. It's like getting number plates of an new Golf and put in on the rusty MK1 in really bad condition and expecting that it is allowed and you are still insured :D
Шикарная работа!!! У меня в стране таких мастеров нет. 100500нравится
Да да, а у нас в стране за такую поделку за решетку пойдёшь...
The two way mirror lights becoming real popular in car lighting and I'm down with it
This is one of the best light from your creation...
Сколько смотрю столько восхищаюсь! Нет слов!
Parabéns, lindo trabalho, muito bom mostrar ao mundo.
Wooow what a masterpiece with that infinity illusion mirror. That's awesome.
maşaallah üstad, herzamanki gibi temiz, özenli bir o kadar başarılı bir çalışma olmuş. .emeğine sağlık. .
TEŞEKKÜRLER HARUN BEY
Hele Şükür Bir Türk Yorumu Bulabildim 🇹🇷🇹🇷
Felicitaciones infinitas un trabajo exquisito!!!
once again i have to commend you on your work. this must take hours and hours. lots of which seems like on the spot adaptation. Your skills are amazing to see. Great Job
сначало подумал колхоз, потом в конце офигел.. круто выглядит!
выглядит круто, но все таки это колхоз в плане эксплуатации. так то я тоже впечатлён. но мне не верится, что это будет 10-15 лет без проблемно эксплуатироваться. года через 2 начнут светодиоды выпадать, поменять там ленту сложновато.
@@alexsandrboroda9816 ну поменять фары на сток на этой тачке стоит 20 евро, так что что там будет через пару лет пофигу.. главное у чувака талант, причем не плохой...
Я тоже подумал колхоз
@@alexsandrboroda9816 можно будет ему привести на ремонт, по идее можно его любой дизайн просить, ото много всего выглядит как колхоз, опять же лучше чем на дешманских авто с завода со светодиодами
@@alexsandrboroda9816 тот, кто покупает авто на 10-20 лет, не будет изначально задумываться о подобных модернизациях)
Жаль 1000 лайков непоставить ! Мастер - золотые руки!!!
Parabéns meu querido, excelente trabalho.
süper olmuş eline sağlık gördüğüm en iyi tasarım olmuş
безумно понравились,но я рукожоп 😥 ...вот,если пару досок между собой сколотить,гвоздем на 150 эт пожалуйста)))))))
я такая же хуйня... :) автор молодец!
надеюсь ты его обязательно загибаешь после сколачивания? и конечно, чтобы одна доска немного лопнула. так все мастера обычно делают))))
@@alexsandrboroda9816 гг
@@alexsandrboroda9816 еще замечу что загибать надо через гвоздодер. Чтобы он загибаясь закруглялся и потом его забиваешь назад в ту же доску.. :)
ты просто гуманитарий
Dude this is awesome! Please start custom making these so we can buy them!
That would be sick, but I think my local TÜV (MOT) inspector would rip my head clean of, for wasting his time with something he can’t approve. (They rly are under pressure, where I live)
Смотрю и обалдеваю от умения и фантазии мастера. Жаль что на Skoda Octavia A5 никто подобных видео не снял
Yapılan iş güzel kötü hiç önemli değil.ama yapış yöntemleri tam nizami.eline led alan malzemeden kalıp almadan habersiz kişilerin çok videosuna baktım.ama bu kanaldaki her uygulama profesyonelce.eline sağlık arkadaşım
Красавчик.мастеру уважение.а кто знает заказы он берёт?.сам я такое не сделаю)))!
если в турцию к нему только фонари везти)
В россии тож есть умельцы , например я
@@user-fj9os7jw7y Россия пишется с большой буквой "Р" а не с маленькой "р" гражданин Петросян.
@@angrybumblebee2186 👍
@@angrybumblebee2186 А я пишу вообще На россии после 2014го. Я не думаю что у многих эта страна вызывает уважение равно как и ваш президент.
you should offer this service on Ebay to convert Taillights !
PayPal is not available in Turkey , so we can't use ebay
Tolga Balkan there are more ways to accept on line payments such as skrill and so on.. I am from Belgium how much do you take if I send you my car fornt lights to be customised?
So beauty
@@tolgabalkan2968 come to the usa u could start a business.
its all nice and fun, but you cant use this kind of lights in most of countries
wow, quel boulot de ouf mais quel resultat ! ça donne envie d'avoir une C5 rien que pour avoir ces feux ^^
Sanat eseri resmen ustalık el sanatı zeka ve zevk birleşimi
abi sen naptin boyle yaa ellerine saglik efsaneee
Ulan yabancıların bu kadar ilgilendiği sayılı videolardan
turklerden daha cok yabnclarin iligi gostermesi :/
@@Werner-Heisenberg tr deki insanda alım gücü kalmadı ki arabayı aldığına dua ediyor
@@yunusemresabanli8876 haklısın çok kötü durumdayiz
@@Werner-Heisenberg sizin orda araba fiyatlari ne kadar ? benim arkadasim dedi ki sizin orda araba aliyon 3/4 devlete veriyon bizim burda arabalar iphone hersey ucuz mesela yeni iphone 12 bizim burda 1500 dollar sizde 3200 dollar
@@user-ob9mz7in6s bayiden senin aldığım 30 bin dolarlık araba burada 100 bin dolara yakın. Çok fazla vergi var
abi cok manyak is yapiyorsun her defasinda nasil bukadar profesyonel olur diye düsünüyorum ! cok cok iyi Allah basarilarin devamini daim etsin
Dude you are so good and your creativity is amazing. Props.
Молодец!👍
respect
Вот Фантазия у человека развитая и руки растут с нужного места
Piece of art,amazing work you gave me crazy ideas for mine now...
What a beautiful master work.. Love it
Чувак просто крассавчик-однозначно лайк
Нет охлаждения на диоды. Скорее всего быстро умрет и замигает как китайские диодки. Доаботать охлаждение и будет отлично
@@baskery86 Еще зависит от качества диодов, у меня в подсветке простояли диоды 12 лет (почти 500 тыс км преимущественно ночью, если днем как правило свет включен) и светили отлично, думаю и сейчас у нового владельца машины светят.
Вообще какие-то нереальные вещи делает. Очень круто!
bu videoyu 3 kez izledim harika usdam ya ellerin dert görmesin bravo
I really enjoyed your work... it's just amazing.... too good...
Прикольно, но когда подобные будут у всех, в моду вернутся опять чисто красные стопари)))
У всех денег не хватит
@@kimmakar5945 дело не в деньгах, а моде, производитель однажды запилит такие в стоке и начнется опять переделка (не как у всех) в олд стайл)
Скиньте это ролик АвтоВАЗу, а то заепали со своими катафотами в 21 веке.
Боюсь это слишком высокий уровень инженерной мысли для них
Пускай начнут нормальные машины делать, а потом уже катафоты менять на подобное.
да многие до сих пор катафоты применяют, ибо дешево
боюсь тогда из-за таких фар цена на лады вырастет вдвое, это прикинь сколько надо поебаться чтобы такие фары сделать?
@@tsugumorihoney2288 а ты прикинь сколько надо поебаться что бы перегоревший светодиод поменять, простому обывателю это нах не надо, проще лампочку поменять.
You are definitely the best I've seen thus far 👏👏👏
Soy fan, de este hombre 🤯🤘🏻
You are professional👏🏻👏🏻👏🏻
This guy is the best I've seen.
Turkish power!
@@isimyoklanpiyasada fucking cringe
did you not see the skyline one?
@@jabbaweezy u mean the multicolor one? That was over kill. This looks like oem
Where did you see him?
Respekt an solche Menschen
die können sich ihr leben so gestalten wie es denen gefällt
love the work on thiese lights amazing
Класс, спасибо товарищ!!!
Как всегда топовая оптика👍
для грантовода если только
@@siniyden хаха, е#ать ты юморист.
Amazing job and awesome craftsmanship!👍🏻 I wish you would do a set for a 05-07 Ford F-250 Superduty tail lights to see what you could do!
ما شاء الله..
أروع ما رأيت .. أحسنت يا فنان
Ппц круто !!! Спасибо за идею !!!
É possível fazer na lanterna de um Citroën Xantia? 🙈 😍
Esse cara só pode ser de outro planeta.
This guy can only to be from another planet.
Bravo alkışı hak ediyorsun sonuna dak izledim sıkılmadan eline sağlık
Megane 4 ile ilgili bir çalışmanız var mı acaba?
Абрес ахперес макардаэлипс
sana 3kya yaparım
@KacaKTV ben aliyim sana :d
C5 1 in bir tekerini megane4 e değişmem
@@uveysctn_ Aynen c5 müthiş bir araç
I love this, genius!!!!!
This was incredible to watch. I'm going to have to make some lights for a 2002 Lincoln blackwood. I don't have the passenger one but I saw you working with plexiglass. I'm going to try and make one.
Helal olsun hocam çok başarılı 👌🏻🤘🏻🧿
I can’t believe someone would invest this much skill into a Citroen. Seems like you should be modding exotics!
Tiger White relax fuckin rodent
@Tiger White lmao relax
@Tiger White Why don't you calm down hatter chip. And the tape was holding it together to show you the whole effect of the tail light. SMH.
Small one goes to the trunk.... they great and no crushed
Someone get Tiger a happy meal, or shove a light bulb where the sun don't shine so he lighten the fuck up
They look crazy damn good
You should sell their design to citroën
Well done 👍
Böyle biri yok mit bulacak sonunda bu adamın yerini
Əlləriniz var olsun. Əllərinizə sağlık.
Идея отличная и исполнение супер, но вот если что то там перегорит то это перебирать и разбирать все полностью , а не просто лампочку поменять
у светодиодов очень большой ресурс , особенно если работают не в полную силу
@@paveldolinin5946 У светодиодов непредсказуемый ресурс к сожалению. Всё что устанавливается на заводе ещё норм. А всё что в магазинах и али - лотерея
@@paveldolinin5946 теперь осталось это светодиодам рассказать и убедить их в этом. а то они то не знают.
Да на морозе могут диодики начать гореть )))
залип
Muhteşem olmuş ellerinize sağlık
Ну что сказать,руки золотые просто чемпион!
I work at one of the big 3 auto makers in Detroit, and I really wish you'd work in our design studios!!!
i wish if i can send my head light car
to make your style on it.
Браво колега. Качествено работи и ти пожелавам само нагоре да вървиш!
Привет, можешь подсказать на что он приклеивает оргстекло?
Such beautiful light and great work... All for such an hideous car...
Не хватает сравнения, как светило до апгрейда можно только догадываться!
ua-cam.com/video/PwVErQEORNA/v-deo.html
В данном случае больше всего вопросов вызывает площадь, оставшаяся для стоп-сигналов. Не знаю пройдет ли по стандартам. Поворотники толщиной с карандаш тоже решение хоть и модное, но очень сомнительное, особенно если с ними соседствуют (и не гаснут) габариты. Все эти фары хорошо смотрятся в выставочном павильоне, но на дороге иной раз нихрена нельзя различить, что он там сигналит, чем моргает...
@@memodump тут как бы как можно сделать больше а не как вписаться в стандарты ... а габарит с тормозом почти везде на одной лампе до 2005 года в обычности и светодиод как бы в глаз бросается намного четче , хотя переделка по законам не просто спорная а запретная к примеру на России
@@alexyaschik1288 в дам случае закон никого не волнует, да и вряд ли комоту будет охота доёбываться до задних фар
Заводские хуже,кроме стопов,они побольше и поярче,но с такими фонарями не проблема,на заднем стекле стоит дублер стоп сигнала
Остальное тут получше будет)
Сравнить есть с чем,у меня как раз с5х7
Вот что значит руки от куда надо растут.
De unde sunteți și pentru cât faceți un stop,ați făcut un lucru foarte frumos!!Felicitări!!
Просто помпезно....🍾🍾🍾мне бы такие на каризму ..🤔😬🙃
Why do i get the feeling that he wasnt wearing his shirt during most of that project.