DIY Air Filter | Box Fan Modification | Cleaner Air for Your Home from Pollen or Wildfire Smoke!
Вставка
- Опубліковано 27 вер 2024
- Want to breathe cleaner air in your home? Maybe wildfire smoke or pollen is affecting your indoor air quality - give this inexpensive DIY air filter a try! We’ve been using these in our home for over three years and they work fantastic filtering out: dust/lint, pet dander, pollen, dust mite debris, mold spores, bacteria, microscopic allergens, virus carriers, smoke, odors, & smog particles. All for a fraction of the cost of a commercial air filter!!! ↘️↘️Click “SHOW MORE” below to open the full video description! ↙️↙️
Watch all the Box Fan Air Filter Videos here:
• Box Fan Air Filters
🔸 DIY Air Filter | Box Fan Modification | Cleaner Air for Your Home from Pollen or Wildfire Smoke!
• DIY Air Filter | Box F...
🔸 Are DIY Box Fan Filters Safe? • Are DIY Box Fan Air Fi...
🔸⚠ Watch This BEFORE Making a DIY Box Fan Air Filter!!!: • Should You DIY a Box F...
DISCLAIMER We participate in several affiliate programs that earn us a commission on purchases made through our links at no extra cost to you! ⠀
Some product links are affiliate links which means if you buy something we will receive a small commission. As an Amazon Associate I earn from qualifying purchases.
🚨🚨!!NEW!! 🚨🚨If you’d rather purchase a ready made unit, Lasko now offers the Air Flex 2 in 1 box fan that includes a MERV10 filter and filter holder built in!
Lasko Air Flex 2 in 1 Box Fan Filter
🔷 Amazon: amzn.to/3NhkSlh
🔷 Menards: www.menards.co...
🔷 Home Depot: www.homedepot....
🔷 Walmart: www.walmart.co...
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
⠀
⭐🌟 Check out ALL the products and gear we recommend here: ⭐🌟
📦 www.amazon.com... 📦 ⠀
⠀
⭐⭐ Examples of Products Used In This Video ⭐⭐⠀⠀
🔷⠀Air Filters: $10 each! amzn.to/3EZitae
🔷 Zip Ties: amzn.to/3JiEbZB
🔷 Box Fan:
Walmart: www.walmart.co...
Amazon: amzn.to/3ZHb5bp
🔷 J-Channel: www.lowes.com/...
🚨🚨 !!NEW!! 🚨🚨If you’d rather purchase a ready made unit, Lasko now offers the Air Flex 2 in 1 box fan that includes a MERV10 filter and filter holder built in! amzn.to/3L2u7Fm
⠀
⠀
🏘️ Join Our Groups Here: ⠀
www.ganderflig... ⠀
🎁 Find Value In This Video? Buy Me A Coffee:
☕ www.ganderflig... ☕⠀
🛠️ Favorite Tools & Gear
🔸My Everyday Carry Tool - Skeletal CX: amzn.to/3ZGO0Wp
🔸The BEST disposable workgloves! amzn.to/3ZGLiQQ
🔸resqme Original Emergency Car Escape Tool: amzn.to/3ydwCwU
🔸NOCO Boost X Jump Pack: amzn.to/3JaXXpJ
🔸VIAIR 12V Air Compressor: amzn.to/3YtWlMk
🔸the BEST Tire Pressure Gauge: amzn.to/41Pkr6P
🔸The BIG Rearview Mirror: amzn.to/41JbnAt
🔸Infrared Digital Thermometer: amzn.to/3kOUCTK
📸 *Video Gear I Use: amzn.to/3IHWEx2
If you find a “dead link” please let us know! We’ll send you a sticker!
📺 Want to see more of our videos? Don’t forget to subscribe and click the bell icon 🔔 so you're notified when we release new videos!
🎥 Love Gear Reviews? - Watch More!
www.ganderflig...
🧰 Want more DIY projects? Check these out!
www.ganderflig...
🏕️ Watch more RV Life Here:
www.ganderflig...
Connect with us!
💥 All Links www.ganderflig...
🎵 TikTok www.ganderflig...
📷 Instagram www.ganderflig...
💻 Facebook www.ganderflig...
©️ Gander Flight, All Rights Reserved.
This channel is for entertainment purposes only; we are not experts or professionals. We share our opinions, experiences and what works for us. Please do your own research and make your own decisions.
#ganderflight #airfilter #boxfan #diy
air filter,diy air filter,cheap air filter,box fan,air cleaner,furnace filter,smoke filter,wildfire smoke,box fan filter,box fan air filter,box fan air purifier,diy air purifier,diy air filter box fan,diy box fan air filter,box fan filter diy,air filter diy,how to make air purifier at home,homemade air purifier,air purifier diy,diy air purifier box fan,air filter box fan,air purifier,diy air cleaner,fan filter,box fans,box fan with air filter, pollen, smoke, fire smoke, wildfire,
Watch all the Box Fan Air Filter Videos here:
ua-cam.com/play/PLAriVJ-zrwINFsLm9NWBSUFdyV1x3ebqZ.html
🔸 DIY Air Filter | Box Fan Modification | Cleaner Air for Your Home from Pollen or Wildfire Smoke!
ua-cam.com/video/9vJk5BM8xUo/v-deo.html
🔸 Are DIY Box Fan Filters Safe? ua-cam.com/video/zE4qmN_EOXw/v-deo.html
🔸⚠ Watch This BEFORE Making a DIY Box Fan Air Filter!!!: ua-cam.com/video/N_B4LSa0NDE/v-deo.html
Lasko Air Flex 2 in 1 Box Fan Filter
🔷 Amazon: amzn.to/3NhkSlh
🔷 Menards: www.menards.com/main/heating-cooling/portable-fans/lasko-air-flex-20-air-purifier-box-fan/ff305/p-7720120058360405-c-12727.htm
🔷 Home Depot: www.homedepot.com/p/Lasko-Air-Flex-20-in-3-Speed-Air-Purifier-and-Room-Fan-FF305/315516663
🔷 Walmart: www.walmart.com/ip/Lasko-Air-Flex-2-in-1-20-inch-Box-Fan-and-Air-Purifier-in-One-with-3-Speeds-FF305-White/473758982
🔷 QVC: www.qvc.com/qvc.product.H232553.html
🔷 Boscov’s: www.boscovs.com/product/lasko-air-flex-2-in-1-20in-box-fan-air-purifier/763003
🔷 Wayfair: www.wayfair.com/Lasko--Lasko-23.2-Box-Fan-FF305-L447-K~UNW10066.html
🔷 Amazon: amzn.to/3NhkSlh
Recently watched a show on CBC that tested using the proper equipment air purifiers and a box fan with a top of line Filtrate filter. The gobsmacking result was the DIY filtered out twice of the unhealthy air pollution twice as good as the $600 Honeywell and $800 Dyson. Good to know what you’re using actually works!
Wow, that’s impressive!
It's not as powerful as I thought it would be, but it works very well. ua-cam.com/users/postUgkxGjG43--gYqIoT4Xkur2PqCrtbKwTv2h6 There are three options to circulate air, and best of all a remote control for us lazy people. Installation was a breeze (no pun intended). It actually took longer to open the box then it did putting the side extenders on and sitting it in the window opening. It's a perfect alternative when you want airflow, but not the AC. Just might order another one for a different room. UPDATE: Bought another one like I said. They work great. Why not have two...
👍
This will help a ton of us on the west coast.
If you can find a fan and merv 13 filter - all sold out!
Right!? uuuugh
@@griffwally Most any paper filter is better than no filter. I just found my old box fan, now I'm heading to town for a filter. If I have to, I'll double up on the filters to make it more efficient.
*UPDATE.....no filters in town at ALL, so I improvised by placing a white t-shirt over the induction part of the fan (it stays up by itself by the suction) and it's filtering the air pretty well. ;-)
Just bought my fan and filter today! In San Diego and my throat is so scratchy from the smoke!
This is fantastic, i'm glad i saw this video. The zip tie method seems to be much better than the duck tape. Try Amazon, or other online websites for the box fans and filters. I bet the inexpensive box fans will no longer be all that cheap anymore.
Ive been doing this for yrs & it is a very good idea especially in the winter when your indoors more i also put 4 small 5" feet on mine to lay fan down facing up cause dust & other particles are more low to floor & kicked up by movements & blows fresh air upwards & as a asthmatic it helps bigtime hepa filters work best. Awesome vid. 👍👍👍Pass the knowledge..
henry R. Super interesting idea there laying it flat!
@@GanderFlight Hi are you putting the filter where the fan blows air to you or on the back of the fan
@@susanabushaban2719 I prefer it on the back of the fan: ua-cam.com/video/zE4qmN_EOXw/v-deo.html
Right now I have two of these running in my house due to wild fire smoke that is very heavy and ground level now for several days. The filters have smoke colored rings on them, and the air in the house smells better. If you use blue masking tape, it leaves zero gum on the fan.
Putting the filter on front ensures that all the air going "forward" is cleaned. If you put the filter on the back, the front of the fan surface will scoop up dirty air from the front of the fan and circulate it with the clean air. But most importantly it blocks up the fan and is a fire hazard. I would avoid it.
A better configuration uses two filters taped into a triangle shape with some cardboard to fill the gaps. That is much more efficient for the fan and will heat up the fan motor much less.
thanks I was wondering about that
I also wondered about the placement of the filter. I made one last night with a new Lasko fan but found that it left a wierd smell in the room. Kind of like the smell of a new car or something not healthy. Did you have this problem?
When the fans get hot they do smell. If possible don't run constantly and keep on the low setting. This is just my experience.
@@phil562 Good point. I'm trying it on a low setting to see how that work. My gut feeling is that cheap fans (like the Lakso one I got at Home Depot) have low components in the spinning shaft and that these produce the smell. I've wondered about using a bathroom ceiling fan instead, though they are not as powerful as a box fan.
Phil when you don’t have a closed system from one side of the fan to the other it doesn’t make a difference which side the fan is on as either configuration will immediately mix with the rest of the air in the room as soon as it passes through. Filter on the front however will leave you with a much dirtier fan that will need to be cleaned more often. And according to my testing filter on the front or back did not heat up the election motors at any significant level.
I'm a single mom and I just want to say thank you! I got 2 lasko fans today and this is a great idea you help me save money ... thanks again
I'm glad you found it helpful! Cheers to cleaner air :)
Just seeing your vid in 2021. I built 1 of these when I was spraying the drywall in my garage with paint back in 2015. I used painters tape to hold the 3M filter (looks like your filter) on an old fan, that I figured would be destroyed and I'd pitch the fan after the job. It was winter time, and I couldn't open the doors to fresh air. While spraying, I wore a respirator, and used this setup. I changed the fan filter several times during the job. It did a great job of filtering airborne paint particulates. the fan got paint on it, but other than that, it survived to work another job!
Nice!! Lots of applications and ways to put these filters together.
This is awesome! I have an old air purifier that seems pretty inefficient and the price for new filters always seems to be going up. Great job and as others have said great pace. You really should be on This Old House.
Thanks for the kind words - I hope it serves you well!
My brother you are a genius, I'm so impressed with this project, I had to run out the next day and make it for my house. And I also subscribe to your channel...God bless...
Thank you Fidel!
I taped 4 sides with white electrical tape. Looks decent, gets removed easily if I need to change the filter or return the fan. They don't last long sometimes. Make sure you keep the receipt :-D Thanks for idea GF :-D
Try painters tape - little less “gooey” than electrical tape
How interesting as someone who is challenged with tools this one looks much easier!! Love it. Anna In Ohio
Enjoy!
Hey There Dude......What a Great Idea.....I'm So Excited to give this a try....I live in AZ. and the dust here is Crazy.....i also suffer with Asthma and I'm getting over Pneumonia. I live in an apartment with neighbors on each side who smoke and I can smell it and it causes me to cough and get headaches. This so going to be such a Big help. I don't think it looks bad either, as for the sound....no big deal for me....I'll sleep better because the fan will help cover some of the outside noises. Thank You So Much !! I'm going to tell my Kids and Family about this too. Stay Safe and Stay Well....GOD BLESS !!
Fantastic! I hope you get one made up and that it serves you well!
This is the best and simplest DIY air filter I ever see. Thanks alot
Wow, thanks!
Thanks for the video! The filter gives the fan a sort of rolling wind sound that’s very pleasant.
I enjoy the white noise while sleeping as well.
Plus, it is a pain to disassemble and clean a fan. This will keep the blades from getting gummed up.
Whats Going to Break Next? - DIY You’ve got that right!
same. i dont need the air purification but cleaning a fan is getting painfully slow and we have plenty fans here
Yes thank you 😊
Good video - be sure to get your air flow in the correct direction through the filter, whichever side of the box fan you mount your j-channel. Don't put the filter in backward! It's usually best to pull the air through the filter then past the fan.
Absolutely critical - great point!
So put filter on the side where the air blows? I see some people putting the filter on the suction side of the fan.
@@Hboogie182 filters have a one-way arrow because they are meant to be used one-way regardless of where/how they are mounted in the airflow. They often tear or don't work at all if put in backwards. In addition, I get good results mounting the filter before the fan so the fan pulls the air through, both in self-standing box fans and built-in duct or HVAC fans.
Thank you for the video,. I’ve viewed a number of box fan videos and your’s appeared to be the most simple. “Elegant” solution. I purchased the J-channel over the weekend and the filters. Will be setting up a couple this week and will report back the results. Thanks Again.
You are so welcome, hope they work well for your needs!
We have had the fan running in our barn and it is doing a grear job filtering the hay dust. I was able to follow your instructions and everything worked as described. thanks again.
Probably someone already mentioned this in 680+ comments.
I simply turn on the box fan and place the filter on the back... easily held in place by air pressure (vaccum)
Thus I don't need to make any changes to fan or filter. At end I simply turn off fan...filter leans against fan.
Next use I turn fan on and "apply" the filter to the back, again held in place with no physical bracket.
Here I use it mostly for summer wild fires. Can run it all night if wanted.
That'll do!
I have pets and this would be great to have in each room!
Definitely helps with the pet hair and dander!
Thank you so much I put three filters behind the fans about three fans and I noticed a difference after two or three days now I don't have no more stuffy nose and my daughter would take no more it does work thank you very much
I don't think I would triple up these 1" filters - you would be better off going with a 20x20x4 inch filter.
thanks amigo... in cali fires now and can't breath so appreciate the video.. i had one on backwards. it helps alot
I made one last night with a new Lasko fan but I found that it left a weird smell in the room where I ran it for an hour or so. It smelled kind of like a new car or something not healthy. I believe that the smell is coming from the motor of the fan as it heats up. So while I believe the design was doing a good job of removing particulate matter, unfortunately I believe it is releasing volatile compounds that may not be good to breath. Did you or anybody else have this problem? Could this be solved with better quality fan?
Dr Eric Brennan USDA-ARS Is your fan overheating? Is it an older fan? If so that could be an issue.
@@okaminess It was really bad from a new Lasko fan from Home Depot but was also there with an 20+ year old fan.
You're welcome!
When I put an air filter on a box fan, the motor fried after a month of continuous use. Rather than buying another box fan, I removed the motor from the box fan and used the fan case as a filter holder for use with Shop Air floor blower. I used a 4" dryer hose to connect the two together. I glued a 4" hose connector to the floor blower inlet and attached a 4" hose connector to the other side of the box fan case with cardboard to fill in the rest of the open space. This more complicated set up seems to be working. I test the section by laying a tissue on the air filter, and it does hold the tissue in place. The floor blower also jets the filtered air across the room even on low. I've used this set up continuously for well over a year now.
Interesting setup!
Cool idea. Just so you know, you have installed the filters backwards. As the filters clog with dust, they tend to get pulled in towards the fan blades. Furnace filters should always be installed with the wire mesh side facing the fan blades. In this way, the fan is protected from making contact with the filter, as it gradually gets pulled inwards with use.
There is an arrow that indicates airflow on the filter- I installed it according to that.
The more expensive filters will sometimes have the wire mesh on both sides to help protect the spacing of the pleats.
Great idea. I'm going to try this. Good for privacy also which when your side living room window faces your neighbor's living room.
👍
The j-channel is the simplest and easiest method that I've seen. Thanks!!
You're welcome!
That Is a great idea. I'm still using duct tape to hold my filter
The siding tracks make it super simple to switch out the filters with no sticky residue left over ◡̈
Duct tape is sticky overkill, use masking tape. No need for the J-channel slots.
Use gaffer's tape. No residue.
This is awesome, so easy. Most of the ones I have seen involve a lot of work cutting boards etc. to make a box.
👍
I have 3 box fan filters, one in our bedroom, one in our basement that are turned on with timers. Each runs about 12 hours at a time, the bedroom one all night on low speed(white noise). The third in my shop. It has reduced the dust in the house by 75-90% according to the wife. A frame is attached to the fan, the cord is rerouted to the front, and the frame holds 4 18 x 18 merv 13 filters(removes 98% of dust particles) . Higher number filters will challenge the fan in its ability to draw air through ( cheese cloth vs heavy towel doubled up).
Very cool setup Neil! What did you build the frame holder out of?
@@GanderFlight I used 4 - 1 x 3 (21 1/2" & 22 ")and to make a box around the fan and a second identical box for the far end.
To connect the boxes, I then used 8 1 x 3 x 21" to form four L brackets. Be sure to leave about 1 inch space on rear box to accept the filter.
The bottom section is a piece of 1/ 8 luan plywood cut to fit.
Cut some blocks 1 x 1 to support the filter. I placed a filter in place, and nailed them on the top and bottom. If less than 4 inches in length use 2.
To hold the filter in place, I cut 8- 1/8 x 1 x 3" pieces of luan as latches. These are fastened to the boxes on the sides. The filters are 1 inch and the wood is 3/4" so loosely fastened them with screws.
When running the fan will draw the filters tight, and when not the latches and blocks hold them in place.
Our bedroom one is sitting on top of a tall dresser with a rug or towel under it. The basement one is also on a tall cabinet, but with open joists could be fastened to it. My shop one sits on the floor and also serves as fan for my wood-burning stove. It has an angled base. It requires cleaning once a week. I have washable filters in that one.
Ohmygod! I did this thing once, where I put milk on cereal. All joking aside, you are one industrious dude.
Thanks for watching and taking the time to comment Brian.
I was thinking of that size filter that my mom used for her hvac system in Vero Beach. So I googled how to attach it and I found you! I subscribed and Thumbs up! I presume zip ties I can get at a Lowe’s or Home Depot here in New Jersey. 👍🏻
Yes any hardware store will have them, walmart too!
This is VERY helpful now that WA, CA, and OR are going through huge Wildfire Smoke! Thank you for this.
You're very welcome!
I love this idea!
Use a 4" thick filter. The box fan will struggle with providing enough air pressure or "force" to overcome the resistance of the filter. A thicker filter will increase the surface area of the filter and effectively reduce the resistance on the fan. If you need more than about a MERV 8 filter, consider using a different type of fan.
Follow up video here --> DIY Box Fan Air Filter - ARE THEY SAFE? ua-cam.com/video/zE4qmN_EOXw/v-deo.html
OUTSTANDING!
Thanks for watching!
The most elegant and simple method of an air purifier . Best !
I agree!
What s great idea with the J-channel! Thanks!
Any time!
Hey man, thanks so much. Just my grain of salt, for filters, cheaper is not always better. Buy good quality filters guys, if you’re gonna do all this work;)
👍🏻 thanks for the opinion
great stuff bro, didn't even think of this, was using tape lol
Glad I could help!
I watched a few videos on this subject and your idea is the best! Thank you
Glad you enjoyed it!
AWESOME! gonna get me one!
I've been pricing an air filter, the replacement filters are almost as much as the unit cost! I have a box fan and zip ties, just need that J thingy he was talkin about
Good luck!
What size is the J-channel ?
J-channel White 0.625-in x 150-in Vinyl Siding Trim www.lowes.com/pd/Georgia-Pacific-J-channel-White-0-625-in-x-150-in-Vinyl-Siding-Trim/50133870
Yea. What is it?
This would/should work for classrooms, to reduce the risk of airborne Covid virus being spread. Thanks!!
👍🏻
Genius! (And all the women are thinking about the fragrance attachments that can go on the backs of the filter.)
*Btw, will Velcro strips work in place of screws or zip ties?*
***
On another note.
Years ago my A/C went out during a heat wave. While at the grocery store I overheard the CS rep joking with a customer about blocks of ice people used to put in front of their fans to keep cool. They laughed& laughed as the lightbulb went off above my head. I promptly returned home, filled empty milk jugs with water& froze them. They were frozen by nightfall, enough to sleep comfortably until I could get my unit fixed.
I would think velcro should work too - or even painters tape to hold the filter in place. And the ice evaporation coolers are definitely something to keep in the back pocket for situations just like yours!
Excellent video - Your J channel idea is terrific. I ordered a box fan 2 days ago and was planning on building a wooden frame to hold the filter in place but your J channel idea is far better.
It works well and is super simple to attach. Hardest part it cutting it to length 😀
Do I need to purchase one J Channel or two?
Thank you. Good idea to use tie tie and the J-channel. So, easy to set up and undo.
You bet! I really like that its all semi-permanent and can all be undone in a matter of minutes.
Cool beans! Going to make this!
Have fun!
putting a smart wifi plug and setting auto timers on this will be great!
Those would be great additions!
You must be very industrious! Cool idea!
I dare say this dang box, bouncin’ crusty-dusties is downright elegant! throw some lipstick on her ridges and i got me something I can bring home to mama!
hahahaha - enjoy!
Wow I'm making one now thanks 👍
No problem 👍
Thank you soo much for sharing this!! I have asthma. This would help sooo much and help clean air that much more for my whole family as well!! 👍🏻🤘🏻👏🏻👏🏻
Glad it was helpful!
Thank you so much my daughter have allergies and asthma and this would help Her a lot especially right now with all this smoke.
You are so welcome!
1. J channel for vinyl siding
2. Zip ties
3. Furnace filter
4. Box fan
👍
Thanks for posting this, very helpful here in Washington State.
Glad it was helpful!
Thanks so much for your help & research
You are so welcome!
Thanks... Very simple and ingenious.
Hope it saves you some money!
This is a great idea! West coast love on base, no A/C I’m gonna do it. Thanks
You’re welcome.
If you don’t see an arrow the side that has some type of support structure (this could be cardboard, nylon webbing, etc.) goes towards the box fan.
👍
Thanks Dude great idea, so happy you put this video up.
No problem 👍
Excelente idea. Gracias. Saludos desde PUERTO RICO.
Thank you!
I have a couple of those cheap fans and even on the fastest setting, the air flow wouldn't move a fart. I can't imagine that putting any kind of filter on it would move enough air to be useful.
Interesting- I've had a handful of box fans and they've moved plenty of air - with and without a filter.
@@GanderFlight I think my fans are just junk. Might get an attic fan and try it. They move a lot of air.
Congratulations that’s a awesome idea. Wow 👏🏻👏🏻👏🏻👏🏻Thanks for sharing
You're welcome!
Super. Great idea. Thanks for sharing
My pleasure 😊
Also the last time I checked, Lasko now has its own "Air purifier". I guess when they found that their box fans was used like what you did, they decide to add the fixture to their box fan, and sell it as a brand new product! It just comes out. At least on Amazon, in maybe one or two months !
Yupp I did see that they've created that product. Depending on the price it might be a better option than the DIY version.
Thank you very much! 👏👍🙏
You are welcome!
Cool hack. My utility high velocity fan has over 3000cfm in its lowest settings and over 5000cfm in medium and over 7000 or 8000cfm in highest setting but it's too loud. I'm better off making a box frame to put 4 sided filters for my design so that it efficiently moves a lot of air thru the filter.
If you have the space for it - the filter cube will definitely perform better.
Awesome thanks 😎
No problem 👍
Absolutely great presentation. Much appreciated from Lismore NSW Australia
Glad you enjoyed it!
Awesome! Thank you
You bet!
Freaking genius 🤯. Thank you for this video! 😎
Enjoy!
Thank you!
You're welcome!
Thank you so much 🙏
You're welcome!
Thanks so much!
No worries!
I will be doing this ASAP thank you sir for this video
Beverly Griffin You’re welcome- I hope it serves you well!
I did this and had to use duct tape as the only filter the store had was 2 inches smaller than my fan. But I love the J channel traps. I'll do that when I replace the filter
Way to make do!
Great video Bud keep it up this cleans the air better than 600$ Dyson
Enjoy!
Going to get a filter to try this I’ve been so stuffed up and having runny noses in my house but don’t wanna spend the hundreds of dollars on the air purifiers at the store. Going to see if it helps plus it’s nice cause you can see in the filter when it gets dirty all the dust and stuff it’s taking out of the air
you might give this option a try: ua-cam.com/video/N_B4LSa0NDE/v-deo.html
Thanks great video
Glad you enjoyed it
Ive taped a 5 inch thick filter to a fan, works relatively well.
However I tried another design, 4 thin filters on sides, cardboard base, and fan on top blowing up. Tape it all together. Tons of airflow with this design.
Personally I'm fine with tape over an engineered mounting bracket. Tape seals pretty well. Depends on how often you need to replace the filters I suppose.
Yeah thats a very common setup - and if you have the room for it it will definitely filter more since there is more area available on the multiple filters.
I loved this! You did such a great job not only explaining, but also demonstrating, how easy to create this air filter. I like you sped up the film through parts saving us time as well. Great job. If I go to my local Lowe's or Home Depot and say, "I want a three foot piece of 1 inch J-Channel, will they know what I'm talking about? :)
They will know what the J Channel is - but it will come in a much longer length than 3 feet and I doubt you'll get them to cut it for you (as it can chip on the power saws) but you could stop by the hand miter saw station near the molding section and use the one they have provided for customers.
Great video. I will be getting the j channels and setting it up your way. Thank you!!
Have fun!
Great idea but where did you get those vinyl j channel, big box sells them by the big package.
Got them at Lowes - had to buy a single long piece and then cut it. If you want an off the shelf option check this out: ua-cam.com/video/N_B4LSa0NDE/v-deo.html
I have been off and on for a week looking for a good air purifier (AP) (overwhelming) Reading some many reviews from the top 10 AP & when I thought I found one the issue was replacing the filter which will cost more than the air machine itself which makes no sense to invest and be paying $30-100 maybe more a life time to replace filter every 3/6 months. Or it has some kind of malfunction after a week/6months. I got a recommendation on my UA-cam same video as this one(before looking at this DIY)from Michigan Medicine(very old video which I see have come around 2020). I know for sure how long box fans last and this DIY will be very cost efficient so I will be doing this ASAP maybe add some color to the frame or get a covered made for it.
M. Magdalene Ford RN, Future ANRP adding color could really liven it up!
I had made them many times. The 1st one the box fan usually burns out quick Had them last as little as 1 month to 2 years.
Interesting - I've had some that have been running for way longer than 2 years with no issues.
Great idea! Will try it, the only thing that could not see very detailed how to attach the plastics to the fan but I will try it out. Thanks for the video.
Zip ties
Zip ties through the slots on the jchannel and around the grate on the fan.
Thanks for sharing. Like 6.7K+
👍
All this time I was putting the filter on the back of the fan. Love the J Channel hack..I’ve been slathering on blue painters tape. Edit: Several DIY videos do put the filter on the back. Some on the front.
Yeah I prefer it on the back.
@@GanderFlight 💨 📦 🙂
I love this idea!
Thanks!
Thank you! Great video.
You’re welcome!
Hey not sure if someone mentioned it but at 4:40sec as you're installing the filter, I believe the filter is on backwards since the filter is behind the air flow. I literally just started my air purifier machine in which was gifted to me and here I am watching DIY air cleaners lol
At 3:50 you can see the air flow arrow pointing in the correct direction.
i notice you don't show the upper and lower corners of the filter placed against the fan, from what i have noticed using the j channel there is a slight gap at the corners, this will cause a slight suction vortex of dust to accumulate in the fan and blow straight out into the room, that's why I seal it with tape all the way around the frame of the fan, it's not as cosmetically appealing but it is more efficient.
There are definitely many ways to accomplish the same goal. Check out some additional testing here: ua-cam.com/video/zE4qmN_EOXw/v-deo.html
You could take the back grill off and add the J channel without the pain of fishing out that part with a screwdriver
Probably wouldn't have enough room within the J-channel then for the width of the filter.
Great idea, hope that it works.
We've used them for years - just got some of these as well: ua-cam.com/video/N_B4LSa0NDE/v-deo.html
I put the filter on the back, with the air flow arrow pointing the direction the fan is blowing. I can't see any reason why not to do it that way, although maybe I'm wrong. The force of the draw on the fan at full speed seems to hold the filter securely in place. I don't plan on using this when I'm not around though. I'm pretty sure it overworks the motor and I don't want to worry about it catching fire.
👍
I did the same thing only I used a wind speed meter, dylos particle counter, a 1” filter and a 4” filter. I found the 4” filter cleaned as well as the 1” filter but the 4” filter allowed 4x the air through. I believe that more air flow volume would have more cleaning ability.
CC Chodkowski that makes a ton of sense. What did you use to attach the 4” filter to the fan?
Yes what did you use to connect the 4 inch filter to the fan???
So you used 2 filters and did you just stick it together back to back??
Very cool! I will have to do this!
@@1998bmf no, they sell 4" thick filters. Check Amazon, but yes doing them back to back would also increase surface are and air volume
I u put a filter on both sides it may reduce the noise some more and maybe clean better.
Might be too much air flow restriction for this fan - you might not actually be pulling much air through both filters.
Ingenuity to the nth degree.....thanks
You bet!
Both of my box fans have the control in the front so that would work to. This is not the video I was looking for but this is the video I needed :-) what I was looking for is could I mount a box fan to the ceiling of my trailer
What kind of trailer are you trying to mount it to? Some simple eye hooks and some short lengths of chain might do the trick.
@@GanderFlight it’s a travel trailer oddly enough they put carpet on the ceiling and Laminate down for the flooring
🌱🍀🌿 Thank you such! It's pollen season for me here in Seattle. I needed and inexpensive alternative for my home. 🌿🍀🌱
Absolutely! And the fan manufacturers just came out with a production model of this that you can buy already made and setup - only slightly more expensive than making your own- there is a link in the video description if you want to check it out.
Used some strips of double sided tape. Worked perfectly and can adjust a bit if needed.
Hi Kyle, I made one but noticed a weird smell in the room from the fan motor. See my comment above. Did you experience this?
@@EricBrennanOrganic No, the smell is likely either carbon from a worn/bad motor (internal friction), or the lubricant used on the shaft. Does it smell like burning metal? If the fan is old, I'd use some 3 in 1 oil the shaft, just make sure it doesn't get all over the coils.
@@KH-id2hr Hi Kyle, the fan was new (Lasko from Home Depot). But I also smelled it from a 20+ year old box fan.
Double sided tape works too!
Hello! Sorry this may be a dumb question, but where do you then put that fan, not the window as it’s not extracting?
I’d also like to put one in my bedroom, can I have it blowing towards me for the breeze in summer?
@GanderFlight