Kenwood XR401 4 and XR601 1 real world amp DYNO
Вставка
- Опубліковано 12 кві 2022
- Get your shirt here www.dandfswag.com
Visit Dean and Fernando's Tool drawer for a all your install tool needs
www.dandftooldrawer.com
If you like what we do, support the show at Patreon-
/ fivestarcarstereo
Our Social links if you want to keep up with us
Facebook- / fivestarcarstereo
instagram- / 5starcarstereo
Dean- / deanbeyett
Fernando- / mr_lopez13
twitter - / 5star_carstereo - Авто та транспорт
As always, Great video! Thank you for the support!
I keep coming back to this and will buy the combo. I initially was going to go with 2 alpine S2 subs-600w each and then realized my power supply isn’t sufficient to run that much power. I have a 2012 Raptor with 6x8 3 way component alpine Type R 100rms fronts with tweets both in the door and on the pillar, (obviously), and the same Type are coaxials in the rear doors. I initially powered them with a Memphis 400w x 4 amp. For the subs I had Kicker Comp D’s ran by a 500w Memphis in a small cubes BBox under rear seat box to host the two 10s. It truly sounded amazing with the Kenwood 990HD headunit back in the day. I just dropped a 1000z JVC with Excelon guts in it but sadly only have 50x4 Memphis amp pushing the doors and a 1000.1 black diamond pushing the old Comp D’s rated 250w each max rms. Im just going to go back where I began with only JL 300w rms subs with this amp combo. Dont want the install cost of new power etc. Thanks for giving real life voltage input on these amps, rated means nothing unless you can provide it, and y’all make it possible to really see a real life performance rating, and have sold me on your approach! I wish I could really upgrade but if I just achieve what I had when built 10 years ago, I’ll be more than happy! Y’all are great, push more videos please! 🙏🏼
I just received the XR601-1. Waiting for a nice day for install as well as the other components that I see on this wonderful show. Very impressed on the power of this little guy on that Dyno run. Went from less power than my sub can handle to more power than my sub can handle. hmmm.... I am running the XRW12F. These two should pair very well together. Thanks for the Dyno run Dean and Fernando.
Which audio drivers will you be using?
XR 600-1 I put it to 3-12 inch Kenwood
It gives me all I need for Bass.
Awesome little amps, I have the 601 and it puts out good power, nice to see Kenwood broke from the norm with the design, it's a full bridge circuit topology and very nicely laid out. Only knock I had was the color, it looks like it's black but it's not, more of a very dark blueish color which doesn't match with black amps, not a big deal if your hiding it but I like mine on display. One other knock is the placement of the gain and crossover, on the back it's a pain to get to, top mounted would have been so much better.
Did you have any issues with the bass knob having no effect till 1/3 turn
@@michaelrobison8572 no, mine worked fine, I actually did take it out in favor of the bass knob on my DSP
@@michaelrobison8572 seen your question on the live stream about using the dd1 on the 601, that amp is a full bridge topology design, not sure if the dd1 is seeing something strange because of that or what, I would shoot a message to Tony D and ask him, might be something with that design of the amp, I set mine with a scope and it was super clean and sounds great
Question? So if the Dynamic is lower than the certified or uncertified, so that means low head room but can you actually hear the difference if dynamic was higher.
dang. that 401 is def. underrated. 75w X 4, ya right. pushing like 140 X 4. That's impressive. The 601 isn't that impressive though, compared to my RF power750, which dynoed at 1,050 < 1%.
I was thinking the same. 75x4 @ 4ohms, 100x4 @ 2ohms. Yeah right! I’m glad I have this little gem.
Why is the mono amp fused for 90amps makes me wonder if it will run below 2 ohm...maybe 1.3 or 1 even
When you do the 4 channel is that bridged or is that single channels and are you using dummy loads for the other channels?
I have the old xr600-1 do they put out rated power?
Can you guys help me choose amp(s) and speakers for my car?!
Why doesn't the Kenwood KAC-M1814 put out the same amount of power as the Kenwood XR401-4? They're both 400 watt class D amplifiers. They are also fused differently. Doesn't make sense to me.
We can't hear that hi-res and us old folk don't even hear up to that 20khz but I hear a lot about how we can hear how those frequencies affect or mix with the ones we do hear.. so idk.. it looks nice to have that certification though lol
20khz hell I don't know if I can hear past 15khz anymore.
👍👀👍
Have both of these amps in my car having a hell of a time setting the gain on the 601, even using a dd1 head unit is a kdc x304 gain all the way down and distortion light is on unclipped signal from head unit to anp just so confused everything is good on 401 also not a fan of the bass knob no signal till a1/3 of the way up it's a volume knob not a bass boost knob. Any help would be greatly appreciated, thanks, guys.
From my personal experience with finding that it was normally caused from noise in the RCA’s or from the ground of the radio… That being said the fix I did was add an extra wire from the ground of the radio to the metal bar behind the dash. Try that if that doesn’t work ground the outside of the RCA’s to the chassis of the radio there’s a video on my UA-cam channel that goes over this Hope this helps
@@stevenwolfie I'm using stinger 4000 series 6ch rcas set gains on XR401-4 with no issues unplugged rcas from XR601-1 connected directly to dd1 clean signal up to 34 max volume is 35 I'm thinking it's the amp or bass knob
Where is sub level on the head unit? I have found in testing a few Kenwood double din's that if the sub level is at just +1 there is visible distortion on oscilloscope at 75% of peak volume. When I left it at 0, the signal appeared to stay clean all the way up. Might be different on the KDC-X304.
Sub level on head unit zero never use it but I found out from Dean that they had same issue when they were setting the gain on their demo for the amp dyno the XR601-1 just doesn't play nice with the dd1 dean and Fernando even called kenwood to ask about it answered my question on Saturdays show.
@@michaelrobison8572 good to know, I’ve also seen some weird things with the DD1, glad it’s not just me 👍
Am I right to assume the 4 channel dyno runs were bridged? The numbers were 150 and 200 which is exactly what they were rated @ 4 and 2 ohms.
I'm wondering the same.
There is a Dyno on the 802.5 where they bridged the speaker channels to get the reading on 2 and they were doing over 300w on each channel bridged.
It seems the speaker channels are very underrated.
For comparison, I lost output when changing from the XR901-5 to the Audiocontrol LC800.4 and got it back when I changed the Audiocontrol for an JL HD600/4.
I'm sure the Audiocontrol does it's rated power of 125RMS @ 4Ohms.
That leads me to believe that kenwood underrated the speaker channels.
The 901-5 also has (3) 40A fuses so that's another indication it might be putting out more than 900watts total.
@@louislugo6156 what's your thoughts in the jl 600/4?? Is it as good as the hype and fan boys lead you to believe? Is it worth the price tag?
It's a good amp, it makes plenty of power and sounds good.
I got mine used, I think they're overpriced.
For the money, I would definitely get the XR401-4.
It's not that the JL is bad in any way, its that the XR line is just really good.
Why doesn't my 601 have a bass knob?
So the XR901-5 is literally these 2 amps combined then
Nope that's only 500 for sub
Yup. 901-5 is rated at 600x1 at 2 ohms for sub channel.
@@rossmclaren2522 no its rated 500×1 @2ohms that's why it's a 901-5 900 watts total power
@@michaelrobison8572 no he's right it's 600 @2 ohm on the sub channel. The X802-5 is 500@2 ohm on the sub channel.
these vs the kicker key setups?
I returned my kicker key200.4 that i did not install because i came across this amp it's a better fit for my infinity kappas 3 way
Can not think of why a company would build a sub amp that is not 1 ohm stable.
Because most normal people dont have more than 2 subs, its not aimed at SPL competitors
Well warranty replacement is kinda expensive
Because people running these amps are probably more into SQ than SPL and it's small, not allot of room for beefier components that 1ohm would require
@@st170ish I have 2 10s at 1 ohm not for spl so you can only use a 1ohm load for spl?
@@charleswp71 I have 2 10s at 1 ohm not for spl so you can only use a 1ohm load for spl?
Kenwood lists a signal to noise radio of only 76db at 1 watt. It may sound good but I stayed away from this cause of that.
I was researching that. That’s actually not bad. If you look at audio controls it’s 105 s/n ratio. However that’s at 50 watts at 4 ohms. As wattage goes up the better the value
@@daveroski Kenwoods x300 line of amps is actually the highest SNR for the cost, at least for class D, which is why I went with them, 85 dB at 1w and 100 dB at rated.
@@vipercrazy9910 what amp in particular? X or these xr?
@@daveroski x302-4
I have owned a pair of 900-5 and still own a 901-5.
I also purchased an audiocontrol LC800.4 and an JL Audio HD600/4
I did not feel an "upgrade" going from the 901-5 to the Audiocontrol, it felt quite like the opposite. I paired the LC800.4 with an HD750/1 from JL and was unsatisfied with the result.
Ended up taking out the Audiocontrol and pairing the HD750 with the HD600 and have been satisfied since.
However, for the money, Kenwood is King 💪🏽
Nice little amps! But Alpine was there and better 10 years ago with their PDX-F6 and PDX-M12. The F6 does 150Wx4 into 4 ohms and the M12 does 1.2kW into 4 and 2 ohms (and over 2.5kW dynamic into 2 ohms). Even Alpine's current lineup can't match what those little PDX amps were capable of - I know because I've been looking as my two PDX amps have developed some "issues" with gain control - living in my hot car for 10 years or so has finally done some damage...
Btw, guys, Kenwood and JVC are NOT the same japanese companies they used to be. They're a cheap chinese junk company now. Their products all sound like crap. I bought a jvc touchscreen head unit and the kenwood x302 4 amp and regret it. Im going back to sony. The quality of the sound is far better