Sonoff DW2 WiFi Door/Window Sensor Unboxing and Pairing to eWeLink
Вставка
- Опубліковано 10 вер 2024
- Find out what the Sonoff DW2 WiFi Sensor is capable to enhance your Smart Home! In this video, we will be sharing methods to set up and install the DW2 sensor which will take less than 5 minutes!
DW2-Wi-Fi comes in two pieces, the transmitter fits onto the door or window and the magnetic switch attaches to the frame. It can help secure your door or window to let you know whether your home is safe wherever you are. The device works with eWeLink (Free app) and performs with IFTTT to control other smart home devices!
Sonoff DW2 WiFi Door/Window Sensor: www.cytron.io/...
Sonoff S26 WiFi Smart Plug: www.cytron.io/...
Hello, Had an issue with pairing. In short, my router (fritzbx) does not have 80211b (the b part is key) turned on by default. Once I turned it one, voila! It worked.
you need a new tv for that
Can we use this on Tuyap application ? I have other smart plug device connected to Tuyap. I just wanna use one application for the all sensor and smart device.
How long does the battery lasts? Can you please answer?
THANK YOU VERY MUCH
Hi. I pair with bluetooth. But connect to wifi. I dont have any problem with modem 2.4. And have lots off sonoff. What to do , any one know ?
I have the exact same situation
Hello, Had an issue with pairing. In short, my router (fritzbx) does not have 80211b (the b part is key) turned on by default. Once I turned it one, voila! It worked.
I have several SONOFF 4CH PRO R3s and the first one was BAM connected no problem. All the others Had to be done with either bluetooth or the alternate way by initiating its own wifi then it jump on the network.
I bought one but I can't find the way to pairing it can you help me please?
Hi. You may drop an email to support@cytron.io for further technical assistance. Thanks :)
you need a new jbl tv for that
should there be a brdige for this ?
I've looked inside and they don't use reed magnetic switch. Do you know what else they use as there is still magnet on other side?
hall effect sensor
Please help if is possible to make a scene on Sonoff like this:
- to keep the bulb light off if you open the door less than 1 min . Otherwise to be switched on.
- The ideea is * do not turn on the alarm if the door is closed in less than 1 min *
I did it.
супер / super
hey hi, thanks for this video. how do you get the plug on and the bulb off? to me if the plug is on also the light bulb is on.
Works with alexa ?
Yes, eWeLink works with Alexa :)
@@cytrontech Thanks
Can be mounted outside ?
If by outside you mean indoors then yes.
@@AztecWarrior69_69 Thanks, is just seven months im waiting now i can finally buy it...
@@conroe81 You have to wait a full year. Just to make sure. That's about the same time the new model comes out.
My doesnt go into pairing when i insert a needle into the hole.i opened mine and there is no battery
Hi. This set doesn't include battery, you may need to purchase battery separately. You can drop an email to support@cytron.io so we can help assist further. Thanks :)
The sensor does not work. I bought two. Alkaline and new batteries. Not even close to the wifi router works properly. I updated the firmware and nothing worked properly. It only updates the status when you press the micro touch button. I just wanted to turn on the lamp in my garage. Just like their propaganda shows. Don't buy it. Money thrown away! PS: Only works on 802.11 b standard. Does not work with g / n / a / ac.
I bought one ...It seems to work but my phone doesn't always get notifications when it's locked ...but when i unlock the phone it immediately gives notification.
I'm guessing it could by my phone because even with Gmail it's often late notifiying me with new email ... and again when i unlock the phone I get notifications.
@@ricomaticrich2817 I have (had) one - in the bin now - would'nt stay connected went to sleep and would rarely reconnect. Moving to Shelley products now.
I confirm. WiFi in this device is unreliable. My 3 DW2 devices are almost always offline. I manage to make them online when put close to the router antenna (like 1 meter). Once I attach it to doors (which are not far from router - 3 meters, behind a wall) or windows (2 meters, through gypsum cardboard) , it quickly loses connection and never gets it back. Going to throw it to the trash. Better get DW1 (433Mhz) if you want it reliable.
Sounds like user error