Now that's a nice dash!!! I can't tell if it's a dash cover or the original. But man it looks nice... For those thinking it's too much he's really going into deep detail on explaining everything. It doesn't take that long to do. Especially if you've bought their premade wire harnesses. I got the same pioneer head unit and the stock amp bypass wire harness. It was a simple process. Love the channel but I think his explanations might turn some off from doing it themselves. I was able to install my own amp, remove the stock amp, install my tweeters, 2x door speakers and 2x rear deck speakers and 2x 12's in about 2 hours. Mostly running wires (the rear deck was sort of a pain to remove and I used sound deadener.
Just installed your harness in my new TL today, love it! Works great. Had to unplug the center speaker as it was buzzing, but easy to do when the hvac vents are already off.
Ordered your kit to install pioneer with CarPlay in my sons car. Worked great! Followed your video here and we knocked it out together in a couple hours. Everything works perfectly! Thanks!
This is a great video. I picked up my Acura used and whoever owned it before me did a huge hack job. Factory amp was missing, they chopped into the amp wiring harness and used funky home speaker wire and duct tape everywhere. Finally got a replacement factory amp and a replacement harness back in now I’m just patiently waiting for my custom harness from you guys. I can’t wait to use my new (used) Kenwood deck.
@@sinkars5617 I sold the Acura a couple years back. The sound was great but it didn't hit hard as I would have liked on the sub, still much better than factory though!
@Mobile Max Car Audio Just installed my kit and it works flawlessly. Thanks for the video to gain confidence in what I was doing, since it's been a little while. I also got the Parking Bypass and it was easy to install as well!
hey that is why we sell plug and play solutions so you don't have to wire anything we also offer phone support to help you remotely! Hope the video helps
@@MobileMaxCarAudio thanks alot, when I get the time and money, will definitely pick this up. All the other head unit solutions I see end up removing the climate control temp display (no big deal but would be nice to keep)
I was hoping you would’ve covered what would happen with a OEM navigation still have power but touch screen and controls don’t work after installing rear view camera, a Bluetooth radio with cable harness. I forgot to get the wheel control module but that’s coming later this week. Rear view camera works, radio works, sound works.
I have an '02 TL-S and thinking about getting something new, too. My navi disc is so old I might as well replace the nav, as well. Been using Google Maps on my Android phone for a few years now.
My original radio for my o5 only works sometimes . And no radio info on the heads up display when satellite does work . But Am/Fm gives me radio info . I don’t know what to do . I’d like to keep original equipment
Thx for video . My issue is my display above the air vents that shows climate and radio stations doesn’t always show the radio stations most of the time . But climate side is good but fades down sometimes . I’ll hit the top of dash and it will brighten back up . Any ideas??
Getting this done on my 04 TL at Best Buy. Hoping they do everything right, especially the USB for CarPlay as that’s why I mainly want to get an aftermarket stereo.
Anyway you can help me all my fuses are good but my navigation or the radio does nothing the navigation stays black even when starting the vehicle everything seems to be hooked up
This may be a dumb question, how do I remove center console for automatic shifter? I am super excited about ordering this kit. You will hear from me soon for sure!
You don't have to remove the shifter if you remove the trim panel around and it put the shift knob into drive/manual mode. Here are some instructions to help you visualize www.metraonline.com/files/products/INST95-7815B_web.pdf
This might be a dumb question so i wire tap my blue cable from aftermarket stereo to the harness & the red/yellow cable on gray pin? Im installing after work & this all i need answered!!
Hello what cable do I need splice from this harness. Im also going to install an amp but I'm not sure if I need to splice the solid blue wire for the amp to kick on. Cause I don't see any other wire that are loose other than a pink and purple wire.
i’m confused, if you don’t have the bypass what does it not let you do? can you not listen to music while u drive? or is it to where u can’t connect through bluetooth while driving?
Are there any radio systems aftermarket that replace the entire Factory radio and navigation screen because the navigation screen is basically obsolete is there anything that is bigger that goes up into that area as far as a radio
Really Great Video. I followed everything but got lost on the parking bypass. Could not figure out what it was for and which wires are bypassed? Thanks Mike.
so i ordered the wire harness for my pioneer touch screen in my TL but the steering wheel control module won't work after holding the volume up on the wheel to pair it. i tried looking for that step in the video but it doesn't show it.
@@MobileMaxCarAudio so i tried the auto setup and manual. the middle connects fine but only volume up, fast forward and rewind only work. it doesn't go to the next/previous track or change the source.
Yes pioneer sells units that have seperate brains from screens that you can fabricate to fit in the top screen location but what we have found is then where the factory radio becomes wasted space because you either have to leave the factory radio there or build some sort of cubby. Here is someone on IG who has done it instagram.com/p/B_Xc-Z5JRwL/?igshid=1oxtzyox540ez
quick question! just got a used acura tl 2004 and I am looking to replace the oem stereo headunit with an aftermarket stereo (either a Sony or a pioneer) and was wondering if this would still work if I have the trim that comes with navigation and the 6.4 inch screen, thanks for the video!
HI INEED HELP UNDERSTAND THIS VIDEO IS ONE YEAR AGO I TRY PUT NEW RADIO AFTERMARKET ON MY 2006 ACURA TL NOW TURN ON FINE ALSO CONECT ALL SPEKER WIRES WITH SAME COLOR BUT NOT SOUND . PLEASE HELP ME THANKS
We broke down the video by timestamp so if you are in the middle of an install you can jump to the part you need. Visit our website for all of your installation gear. mobilemaxcaraudio.com/product/2004-05-06-acura-tl-aftermarket-radio-install-complete-kit/ mobilemaxcaraudio.com/product/2007-08-acura-tl-aftermarket-radio-install-complete-kit/ 0:01 - 1:40 Introduction 1:41 - 2:30 Disclaimer 2:31 - 4:40 Radio Overview and Installation Accessories 4:41 - 6:05 Parking Bypass 6:10 - 6:50 Installation Tools 7:00 - 20:00 Vehicle Disassembly 20:40 - 23:10 Dash Kit Install 23:30 - 29:20 Wire Harness Explained (No Sound) 29:25 - 30:15 Plug and Play Harness Overview 30:16 - 30:39 Parking Bypass Install 30:40 - 32:40 Steering Wheel Controls 32:41 - 35:30 Wire Harness Install 35:40 - 35:53 Speaker Mode Setting 35:53 - 38:10 Radio Testing/USB cable 38:14 - 41:46 Reassembly 40:49 - 43:51 Radio Demo /FAQ
@@MobileMaxCarAudio mine stopped working it’s lit up but blank. Aftermarket radio has YET to power on. All wires are wired correctly. Any help would be appreciated. Thank you.
So best buy doesn't have the necessary connectors. We are the only company that has the 26 pin and 40 pin connectors, the normal blue/white 20 pin they will have. I have seen them complete the install by using that 20 pin and then just wire tapping and using rca's to get all the correct signals from and to the car. But for the install to be successful it will really be up to the technician if he can get it done or not. Some are familiar with interfacing with the factory amp and others will get everything working but your subwoofer and touchscreen. Our suggestion if you want to have it installed locally is to buy our DIY Combo which is just the harnesses, bring them to a shop and explain that these are the right accessories and show them the video and wiring instructions. We have videos on how to wire everything as well its just taking the car apart that is hard part.
Man awesome video. Too bad the person that installed the aftermarket that came with mine rats nested a lot of cables behind the console. Now that the amp and sub are having issues I’ll have to use your video for reference!
I know the amp works the sub works ( had them tested) the ground is good the power connection is good but it will not power on my amp. I will have to tap into that red and orange wire with my remote cable to my amp to see if that works. The remote wire was previously tapped to a wire by the factory amp.
So is it the same process if my vehicle is an Acura TL 2006 automatic when removing the panel where the shift knob would be, or would I have to remove the side panels?
Hi again, So I successfully installed the stereo and everything is working fine. That was a success. Only issue now is that the stereo makes a high pitched noise. Any suggestions on whats causing this? And how to fix it? Thanks in advance.
Hi Orlando. I bought the full kit to install a pioneer dmh 220ex but stuck on how to install the bypass cables. The kit i bought has available: green cable, purple and pink. the bypass has a green, blue and black. I gather the green goes to green but what about the other two?
Your going to color match green to green, black to black and then blue to blue/white. The black and blue white you will need to cut back the insulation somewhere and connect the other wires without cutting it completely
Question, i bought a TL about a month ago . It has an aftermarket JvC receiver . I noticed previous owner was running some king of of system cuz he left the rca, remote, power, ground wires i removed the whole console and i didnt the rca’s connected to the unit ? Do they go to the factory amp?
Also if I want to run an amp with a sub will I be able to do so ,I've installed many radios but this car is nothing like back in day 😕 thank you for your time
I am working on a 2007 TL no nav. I am trying to retain the HFL steering wheel buttons, on this vehicle the 2 wires on the steering wheel connector are the orange and pink wires. The connector does not have a green/red wire. The green/red goes to the audio unit and is for remote switch positive on the 05 TL I believe. Looking at the wiring diagrams for the 07 TL the corresponding wire is a pink one. The orange goes to the HFL unit in both vehicles. I have wired a loop wire with a 150 ohm resistor between the pink and orange wires and now the steering wheel buttons do not function correct. The Ch up button changes the mode on the radio. I tried reprogramming the aswc1 but am not having any luck. Before wiring the loop wire all steering wheel buttons minus the HFL ones were working fine. Got any advice or point me in the right direction?
We offer a custom harness solution on our website for any radio Sony included or you can use the DIY kit it has all the standard colors just make sure the radio has 6 RCA ports.
So if your going to run an aftermarket amp for the door speakers and sub you wouldn’t have to harness those RCA connectors correct? You would just bypass it by using the aftermarket radio RCA inlet as outputs and run it to your aftermarket amp directly correct?
yes and then you need to feed the signal coming out of your amp to the factory speakers/your own speakers if you are going to use the factory wiring to run those speakers then we recommend hooking them up at the passenger kick panel where the factory amp is, if not you can always run your own wiring.
What if I have a amp and sub wired? How would I wire the rca from the other harness? I tried plugging the rca from the sub amp into the back of the deck but it’s very weak. Where do I wire tap the rca wires from the second harness?
I have an 07 TL... do I only need the 40 pin connector if I want to keep the factory sub/amp? I am installing aftermarket sub/amp with a double din I want to eliminate factory amp/sub
Yeah you only need the 40 pin if you want to keep your factory navigation, amplifier and subwoofer. If not then you can use almost any harness just you will have to wiretap the steering wheel controls. If you are going to replace the amp and sub I recommend our amp bypass makes the install easy
Mobile Max Car Audio okay, I don’t have factory nav I do have the metra kit with the with the 20 pin connector and power antenna connector, will I still need the 40 pin? I could careless about fact amp
One of my cars is a 06 TL and it has the back screen, back led lights up but it doesn’t turn on you think it’s aftermarket? I bought the car of someone as another commuter
The oem bracket can work with certain radios. We find it puts it at too much of an angle so the bottom center piece doesn't come flush when you go to finish the install.
I got this new wiring harness and it works perfectly with my Kenwood deck. I accidentally cut the wire for the aftermarket mic and got to thinking it would be awesome to tap into the factory harness to use the stock mic, is that possible?
That would be awesome and you probably can but it would take tapping some wires behind the radio and then a converter or some sort of cut mic harness so that you can actually connect it to the back of your radio.
Have few questions plz! What does the parking bypass connect too, green is obvious but black n blue, do u just tap in to same colours on the harness? What about adding back up camera will that deck activate camera when I put car in reverse if it’s plugged into the back of the deck or do I have to hook into reverse lights or something ?Hoping to buy the plug n play kit like u using. Might buy Pioneer AVH-2400NEX is it compatible with that full wired harness?or I’ll have to get same dmh1500nex
Yes your assumptions on the parking bypass are correct, green to green than tap blue and black on the harness. As for the backup camera you will have to tap into the reverse lights or under the dash. Yes both radios are compatible
Mobile Max Car Audio thanks appreciate the info. Also wondering does the harness I buy from u guys have that reverse gear wire I can tap into for the Camera usually it’s purple from what I’ve seen on the stock wires that come with the din deck. It’s what the little wire coming out of the end of yellow RC video cable connects to in the back of the unit.
1 question what I been wondering like the 07 Acura TL that has navigation, will the reverse camera still work on the stock navigation. Than putting it on the aftermarket stereo. Thanks 😊
Hey there, I recently installed your harness and everything works fine, however, could you let me know which wires I tap for the pioneer parking brake bypass? For some reason you don't mention which wires to tap at the point of the video. I did blue to blue, black to black, green to green. Maybe the blue wire on your harness isn't for remote? Or maybe the black wire isn't ground? Please let me know.
Hi I have a 2001 TL the problem I have is my brother installed his old Pioneer radio in my car and when I tried to use the Bluetooth feature for my phone it says that the unit is full and I cant clear it because I dont have the bluetooth connection. How do I hook up bluetooth for my car so I can clear my radio and link new phones to it.
So you need to temporarily ground the green wire of the pioneer so that the radio thinks the car is in park. Then you can go into the settings menu and clear the Bluetooth memory and you should be able to then add your phone
@@MobileMaxCarAudio I will try and clear the memory out from the park position it should work then. Also my car has a factory bass speaker and amp but I have that pioneer head unit now someone told me I need to splice in rca cables to use the factory amp and speaker cause the plug is for factory radio only and wo t work with aftermarket radio unless I splice in rca cables
@@eligiorivera2049 correct your Acura has an amp and a factory sub even though it's an 2001. So you have to tap the amp turn on and send the factory sub a signal too.
Hi, i bought one of the full install kits with rca’s for a sony double din unit. Will this be all I need to do or will the signal still be boosted going to the factory amp?
Oh wow. You release this after DAYS I did mine LOL. I’m upset! I struggled with mine and I’m without a sub right now and would love to know how to my single din connected to the factory sub
I took out the factory sub so I didn't need to wire the subwoofer inputs just had the rca coming out the back of the aftermarket radio Ps just saying but a rhino sealed probox for 2 12's fits perfectly inside the back of the trunk allows for lots of space and sounds good 👍
I've heard that some people have lost sound in the sub after installing aftermarket stereos in the Acura TL. Anyone know how accurate this is? Or if this has happened to you?
With this guide, if I understood correctly, you are still going to be using the Factory Amplifier & Subwoofer. Edit: If my statement above is correct I'll surely be getting one of these DIY sets. Great video guide 👍🏼
Now that's a nice dash!!! I can't tell if it's a dash cover or the original. But man it looks nice... For those thinking it's too much he's really going into deep detail on explaining everything. It doesn't take that long to do. Especially if you've bought their premade wire harnesses. I got the same pioneer head unit and the stock amp bypass wire harness. It was a simple process. Love the channel but I think his explanations might turn some off from doing it themselves. I was able to install my own amp, remove the stock amp, install my tweeters, 2x door speakers and 2x rear deck speakers and 2x 12's in about 2 hours. Mostly running wires (the rear deck was sort of a pain to remove and I used sound deadener.
Just installed your harness in my new TL today, love it! Works great. Had to unplug the center speaker as it was buzzing, but easy to do when the hvac vents are already off.
Ordered your kit to install pioneer with CarPlay in my sons car. Worked great! Followed your video here and we knocked it out together in a couple hours. Everything works perfectly! Thanks!
This is a great video. I picked up my Acura used and whoever owned it before me did a huge hack job. Factory amp was missing, they chopped into the amp wiring harness and used funky home speaker wire and duct tape everywhere. Finally got a replacement factory amp and a replacement harness back in now I’m just patiently waiting for my custom harness from you guys. I can’t wait to use my new (used) Kenwood deck.
looking into getting one man. how is it ? does it bump hard after getting everything situated
@@sinkars5617 I sold the Acura a couple years back. The sound was great but it didn't hit hard as I would have liked on the sub, still much better than factory though!
@Mobile Max Car Audio Just installed my kit and it works flawlessly. Thanks for the video to gain confidence in what I was doing, since it's been a little while. I also got the Parking Bypass and it was easy to install as well!
how did u do it ?
Seeing all of those wires make my head spin
hey that is why we sell plug and play solutions so you don't have to wire anything we also offer phone support to help you remotely! Hope the video helps
@@MobileMaxCarAudio sounds good! I have been searching for head units for non-nav TL. Can you also wire in a backup cam on this unit here too?
@@va2_lee yes you will need to tap into reverse wire for the TL and connect to the aftermarket radios input.
@@MobileMaxCarAudio thanks alot, when I get the time and money, will definitely pick this up. All the other head unit solutions I see end up removing the climate control temp display (no big deal but would be nice to keep)
@@MobileMaxCarAudio will it work on the fancier model with sat nav?
bouta buy this on sunday looks like it fits perfect and flush . Exactly what im looking for
...decided it would be easier to purchase another vehicle.
I promise you it's not as hard as you think. Plus most car audio shops will charge an arm and a leg for installation.
I was hoping you would’ve covered what would happen with a OEM navigation still have power but touch screen and controls don’t work after installing rear view camera, a Bluetooth radio with cable harness. I forgot to get the wheel control module but that’s coming later this week. Rear view camera works, radio works, sound works.
I have a 04 tl love the car im going to put new audio system.
I have an '02 TL-S and thinking about getting something new, too. My navi disc is so old I might as well replace the nav, as well. Been using Google Maps on my Android phone for a few years now.
@@CitizenPerkins my lil brother has 02 s type too.his a pro audio installer going do my my car beat.God bless
Amazing video. Best radio install I think I've ever seen. Super informative and I'm definitely headed to your website
My original radio for my o5 only works sometimes . And no radio info on the heads up display when satellite does work . But Am/Fm gives me radio info . I don’t know what to do . I’d like to keep original equipment
Thx for video . My issue is my display above the air vents that shows climate and radio stations doesn’t always show the radio stations most of the time . But climate side is good but fades down sometimes . I’ll hit the top of dash and it will brighten back up . Any ideas??
Thank you u are the best fr noone else explained the shii like u🙏
Getting this done on my 04 TL at Best Buy. Hoping they do everything right, especially the USB for CarPlay as that’s why I mainly want to get an aftermarket stereo.
Eesh. Hope it goes well, they charge a lot
I recently bought your guys kit, although I noticed that I hear whining from the right side speaker every time the car accelerates
hello please reach out via phone on Monday 877 542-2872
Anyway you can help me all my fuses are good but my navigation or the radio does nothing the navigation stays black even when starting the vehicle everything seems to be hooked up
I think this has been the best video. Very helpful and I appreciate you making this video
What about using the others unit for controlling the temperature in your car will it work the same but the bottom part just won’t turn on?
This may be a dumb question, how do I remove center console for automatic shifter? I am super excited about ordering this kit. You will hear from me soon for sure!
You don't have to remove the shifter if you remove the trim panel around and it put the shift knob into drive/manual mode. Here are some instructions to help you visualize www.metraonline.com/files/products/INST95-7815B_web.pdf
Put parking brake on and shift the car into drive or neutral it helps
This might be a dumb question so i wire tap my blue cable from aftermarket stereo to the harness & the red/yellow cable on gray pin? Im installing after work & this all i need answered!!
yes, but you will have no subwoofer or center channel and your navigation will not work. Also factory HFL will not work.
I got ur harness and radio ex220 everything is great I installed a aftermarket amp and subwoofer how do I retain sound.from my factory subwoofer?
Hello what cable do I need splice from this harness. Im also going to install an amp but I'm not sure if I need to splice the solid blue wire for the amp to kick on. Cause I don't see any other wire that are loose other than a pink and purple wire.
i’m confused, if you don’t have the bypass what does it not let you do? can you not listen to music while u drive? or is it to where u can’t connect through bluetooth while driving?
Is there an update on that 3d print mold you were making to replace that navi screen?
Are there any radio systems aftermarket that replace the entire Factory radio and navigation screen because the navigation screen is basically obsolete is there anything that is bigger that goes up into that area as far as a radio
Really Great Video. I followed everything but got lost on the parking bypass. Could not figure out what it was for and which wires are bypassed? Thanks Mike.
Appreciate the info bud..will definitely need one of your install kits.
just went to your website I have a 2006 Acura TL non nav, how do I know which harness will work don't know what amp in my car
Man I need to do this so bad but man that wire segment looks intimidating ...
so i ordered the wire harness for my pioneer touch screen in my TL but the steering wheel control module won't work after holding the volume up on the wheel to pair it. i tried looking for that step in the video but it doesn't show it.
You need to reset the axswc. Then hold volume up also make sure you are connected to the correct port. m.ua-cam.com/video/8hE_JGRophc/v-deo.html
@@MobileMaxCarAudio so i tried the auto setup and manual. the middle connects fine but only volume up, fast forward and rewind only work. it doesn't go to the next/previous track or change the source.
Do you just solder the parking bypass and to the green and that’s it?
Is it possible to replace the top factory screen instead of the bottom cassette/dvd section which you replaced?
Yes pioneer sells units that have seperate brains from screens that you can fabricate to fit in the top screen location but what we have found is then where the factory radio becomes wasted space because you either have to leave the factory radio there or build some sort of cubby. Here is someone on IG who has done it instagram.com/p/B_Xc-Z5JRwL/?igshid=1oxtzyox540ez
quick question! just got a used acura tl 2004 and I am looking to replace the oem stereo headunit with an aftermarket stereo (either a Sony or a pioneer) and was wondering if this would still work if I have the trim that comes with navigation and the 6.4 inch screen, thanks for the video!
HI INEED HELP UNDERSTAND THIS VIDEO IS ONE YEAR AGO
I TRY PUT NEW RADIO AFTERMARKET ON MY 2006 ACURA TL NOW TURN ON FINE ALSO CONECT ALL SPEKER WIRES WITH SAME COLOR BUT NOT SOUND .
PLEASE HELP ME THANKS
We broke down the video by timestamp so if you are in the middle of an install you can jump to the part you need. Visit our website for all of your installation gear.
mobilemaxcaraudio.com/product/2004-05-06-acura-tl-aftermarket-radio-install-complete-kit/
mobilemaxcaraudio.com/product/2007-08-acura-tl-aftermarket-radio-install-complete-kit/
0:01 - 1:40 Introduction
1:41 - 2:30 Disclaimer
2:31 - 4:40 Radio Overview and Installation Accessories
4:41 - 6:05 Parking Bypass
6:10 - 6:50 Installation Tools
7:00 - 20:00 Vehicle Disassembly
20:40 - 23:10 Dash Kit Install
23:30 - 29:20 Wire Harness Explained (No Sound)
29:25 - 30:15 Plug and Play Harness Overview
30:16 - 30:39 Parking Bypass Install
30:40 - 32:40 Steering Wheel Controls
32:41 - 35:30 Wire Harness Install
35:40 - 35:53 Speaker Mode Setting
35:53 - 38:10 Radio Testing/USB cable
38:14 - 41:46 Reassembly
40:49 - 43:51 Radio Demo /FAQ
I got a pioneer avic 8200nex where is the pink vss wire suppose to connect? where is the vss wire in a 2006 acura tl auto non/nav? thanks
Is the temperature control on the screen above still operational?
Yes fully functional except of course for the radio interface.
@@MobileMaxCarAudio awesome and thanks for the video, very thorough
@@MobileMaxCarAudio mine stopped working it’s lit up but blank. Aftermarket radio has YET to power on. All wires are wired correctly. Any help would be appreciated. Thank you.
@@lovemejames what wiring did you use?
Would this work the same if I ordered from Best Buy and had them install the DMH-1500NEX model but without steering wheel control?
So best buy doesn't have the necessary connectors. We are the only company that has the 26 pin and 40 pin connectors, the normal blue/white 20 pin they will have. I have seen them complete the install by using that 20 pin and then just wire tapping and using rca's to get all the correct signals from and to the car.
But for the install to be successful it will really be up to the technician if he can get it done or not. Some are familiar with interfacing with the factory amp and others will get everything working but your subwoofer and touchscreen.
Our suggestion if you want to have it installed locally is to buy our DIY Combo which is just the harnesses, bring them to a shop and explain that these are the right accessories and show them the video and wiring instructions. We have videos on how to wire everything as well its just taking the car apart that is hard part.
@@MobileMaxCarAudio how do I order the plugs from you?
Man awesome video. Too bad the person that installed the aftermarket that came with mine rats nested a lot of cables behind the console. Now that the amp and sub are having issues I’ll have to use your video for reference!
I know the amp works the sub works ( had them tested) the ground is good the power connection is good but it will not power on my amp. I will have to tap into that red and orange wire with my remote cable to my amp to see if that works. The remote wire was previously tapped to a wire by the factory amp.
A very detailed video. Mad props!
do i need to use the rcas for the harness or can i get by without using them. we plan to add amplfiers to push everything
I’m guessing the wire tap for the amp turn on should be wired up to the blue wire from the headunit…. The remote wire
you cant replace the actual navigation?
Hey bro how did you wire the parking bypass into the plug n play harness?
for the apple music would you be able to just connect your phone to bluetooth instead of a cord
yes
So is it the same process if my vehicle is an Acura TL 2006 automatic when removing the panel where the shift knob would be, or would I have to remove the side panels?
Hi again, So I successfully installed the stereo and everything is working fine. That was a success. Only issue now is that the stereo makes a high pitched noise. Any suggestions on whats causing this? And how to fix it? Thanks in advance.
Update:: Figured out front center speaker had to be disconnected. All good now.
I have your kit and everything works but theres no sound! Mine has 4 rca spots on radio (2 white and 2 red) and I tried diff combinations
will the plug and play harness work with boss stereo
Hi Orlando. I bought the full kit to install a pioneer dmh 220ex but stuck on how to install the bypass cables. The kit i bought has available: green cable, purple and pink. the bypass has a green, blue and black. I gather the green goes to green but what about the other two?
Your going to color match green to green, black to black and then blue to blue/white. The black and blue white you will need to cut back the insulation somewhere and connect the other wires without cutting it completely
What resistor did you say you used for the navigation to work 68 or 6 to 8?
68 ohms
Mobile Max Car Audio thanks 💯
Can any type of 68 ohm resistor work? Or a specific type?...
My navigation isn't working after I installed everything I used a 68 ohm resistor and still nothing any help?
Question, i bought a TL about a month ago . It has an aftermarket JvC receiver . I noticed previous owner was running some king of of system cuz he left the rca, remote, power, ground wires i removed the whole console and i didnt the rca’s connected to the unit ? Do they go to the factory amp?
Where do I wire the amp turn on to?? After I wire tap it to the red/yellow???
Plz awnser soon I’m sitting not knowing wtf I’m doing lol this is the first radio I’ve done n it’s annoying lol
Do I connect the red/yellow on the grey plug to the yellow/red on the blue plug??
@Mobile Max Car Audio
Which is the reverse wire for the backup camera?
Where can I get a harness like that one you have I have an 05 TL and want to put a new system in it, please let me know 🙏
Also if I want to run an amp with a sub will I be able to do so ,I've installed many radios but this car is nothing like back in day 😕 thank you for your time
So it is not possible to remove the navigation screen?
I am working on a 2007 TL no nav. I am trying to retain the HFL steering wheel buttons, on this vehicle the 2 wires on the steering wheel connector are the orange and pink wires. The connector does not have a green/red wire. The green/red goes to the audio unit and is for remote switch positive on the 05 TL I believe. Looking at the wiring diagrams for the 07 TL the corresponding wire is a pink one. The orange goes to the HFL unit in both vehicles. I have wired a loop wire with a 150 ohm resistor between the pink and orange wires and now the steering wheel buttons do not function correct. The Ch up button changes the mode on the radio. I tried reprogramming the aswc1 but am not having any luck. Before wiring the loop wire all steering wheel buttons minus the HFL ones were working fine. Got any advice or point me in the right direction?
I have 2004 w/ NAV but the nav isn’t working, is the install the same?
yes the navigation just won't work
What about the center piece removal for the 05 dual shifter?!
What about this wire harness for a Sony double din. The 06 to has navi also
We offer a custom harness solution on our website for any radio Sony included or you can use the DIY kit it has all the standard colors just make sure the radio has 6 RCA ports.
It does . What's the website
@@boxchevyrider88 mobilemaxcaraudio.com/product/2004-05-06-acura-tl-to-custom-radio-wiring-harness/
Everything works besides my sound any idea ?
Can you kindly help me to do this for honda legend 2007?
So if your going to run an aftermarket amp for the door speakers and sub you wouldn’t have to harness those RCA connectors correct? You would just bypass it by using the aftermarket radio RCA inlet as outputs and run it to your aftermarket amp directly correct?
yes and then you need to feed the signal coming out of your amp to the factory speakers/your own speakers if you are going to use the factory wiring to run those speakers then we recommend hooking them up at the passenger kick panel where the factory amp is, if not you can always run your own wiring.
Mobile Max Car Audio
Awesome. Appreciate your responses per usual. Definitely buying from you and your company.
What if I have a amp and sub wired? How would I wire the rca from the other harness? I tried plugging the rca from the sub amp into the back of the deck but it’s very weak. Where do I wire tap the rca wires from the second harness?
What model radio are you installing? and what model amp? Do you plan on keeping the factory subwoofer working?
Yes how do you keep the factory sub working?
@@johnharris6406 you gotta wire in those subwoofer inputs he's talking about
Is it the same process if you have navigation system
I was wondering that too!!
It is I installed mine already
Ok cool! Thanks!
Yeah I bought their installation kit off of their website
I just purchased a 07 Type S and im looking to replace the factory radio, my Navi screen doesn't work anyway so I'll be buying this kit soon!
I have an 08 Acura Tl, how much is your custom harness and steering wheel control harness cost? Thanks and very informative videos
I have an 07 TL... do I only need the 40 pin connector if I want to keep the factory sub/amp? I am installing aftermarket sub/amp with a double din I want to eliminate factory amp/sub
Yeah you only need the 40 pin if you want to keep your factory navigation, amplifier and subwoofer. If not then you can use almost any harness just you will have to wiretap the steering wheel controls. If you are going to replace the amp and sub I recommend our amp bypass makes the install easy
Mobile Max Car Audio okay, I don’t have factory nav I do have the metra kit with the with the 20 pin connector and power antenna connector, will I still need the 40 pin? I could careless about fact amp
Mobile Max Car Audio I just want to power the door speakers off the aftermarket radio itself and I am installing aftermarket sub w/ amp for sub only.
Can it be on top instead of the bottom one?
One of my cars is a 06 TL and it has the back screen, back led lights up but it doesn’t turn on you think it’s aftermarket? I bought the car of someone as another commuter
How do you connect factory radio just to enter the code for 2007 Acura TL type S?
HOW EXACTLY do you wire tap the amp turn on wire so you get sound?? Splice into the factory wire? If so, where do you connect the factory wire to?
ua-cam.com/video/ivrg800Mtuk/v-deo.html
I have an Acura 2005 RL with navigation. Can the radio still be replaced?
What sizes aftermarket radios would fit on the metra dash ?
This good for automatic transmission too?
do i need the bracket or the oem bracket that came with the oem radio should be fine ?
The oem bracket can work with certain radios. We find it puts it at too much of an angle so the bottom center piece doesn't come flush when you go to finish the install.
Mobile Max Car Audio ahh i see, Thanks for info
I got this new wiring harness and it works perfectly with my Kenwood deck. I accidentally cut the wire for the aftermarket mic and got to thinking it would be awesome to tap into the factory harness to use the stock mic, is that possible?
That would be awesome and you probably can but it would take tapping some wires behind the radio and then a converter or some sort of cut mic harness so that you can actually connect it to the back of your radio.
Have few questions plz! What does the parking bypass connect too, green is obvious but black n blue, do u just tap in to same colours on the harness? What about adding back up camera will that deck activate camera when I put car in reverse if it’s plugged into the back of the deck or do I have to hook into reverse lights or something ?Hoping to buy the plug n play kit like u using. Might buy Pioneer AVH-2400NEX is it compatible with that full wired harness?or I’ll have to get same dmh1500nex
Yes your assumptions on the parking bypass are correct, green to green than tap blue and black on the harness. As for the backup camera you will have to tap into the reverse lights or under the dash. Yes both radios are compatible
Mobile Max Car Audio thanks appreciate the info. Also wondering does the harness I buy from u guys have that reverse gear wire I can tap into for the Camera usually it’s purple from what I’ve seen on the stock wires that come with the din deck. It’s what the little wire coming out of the end of yellow RC video cable connects to in the back of the unit.
@@Captain420Malone The reverse green wire is included along with the purple in our harness
1 question what I been wondering like the 07 Acura TL that has navigation, will the reverse camera still work on the stock navigation. Than putting it on the aftermarket stereo. Thanks 😊
yes it will still work
Thanks for all your help you doing, amazing job explaining how to connect a stereo.
What all I need for the head unit
Hey there,
I recently installed your harness and everything works fine, however, could you let me know which wires I tap for the pioneer parking brake bypass? For some reason you don't mention which wires to tap at the point of the video.
I did blue to blue, black to black, green to green. Maybe the blue wire on your harness isn't for remote? Or maybe the black wire isn't ground? Please let me know.
Might be a dumb question. But if i have a 2006 tl with Navi can i place the new stereo in place of the navi or do i need to keep the original screen?
you would need to keep the original screen or make major modifications to fit a new double din in that location
i have a base 06 tl with navigation, is it possible to install a double din head unit?
Yes it is possible. It is the same as this video
When you bypass or wire tap the red and yellow for sound , where do you connect it on the a/m harness?
Amp/remote wire on your aftermarket harness it's usually always blue/white
@@MobileMaxCarAudio doe the kit you're selling come with a manual how to install
@@hmoobdc5 yes you can view them here mobilemaxcaraudio.com/acura-tl-aftermarket-radio-diy-kit-instructions/
Hi I have a 2001 TL the problem I have is my brother installed his old Pioneer radio in my car and when I tried to use the Bluetooth feature for my phone it says that the unit is full and I cant clear it because I dont have the bluetooth connection. How do I hook up bluetooth for my car so I can clear my radio and link new phones to it.
So you need to temporarily ground the green wire of the pioneer so that the radio thinks the car is in park. Then you can go into the settings menu and clear the Bluetooth memory and you should be able to then add your phone
@@MobileMaxCarAudio
I will try and clear the memory out from the park position it should work then. Also my car has a factory bass speaker and amp but I have that pioneer head unit now someone told me I need to splice in rca cables to use the factory amp and speaker cause the plug is for factory radio only and wo t work with aftermarket radio unless I splice in rca cables
@@eligiorivera2049 correct your Acura has an amp and a factory sub even though it's an 2001. So you have to tap the amp turn on and send the factory sub a signal too.
I have an 04 nav version but I dont have the nav player in my vehicle! It gone.! Can I install this the same for a navigation unit? Thanks!
I’m trying to install 2005 Acura navy system to a 2006 Acura but the Navi I don’t have the code
How can I get the code
It should be in your owners manual book
Hi, i bought one of the full install kits with rca’s for a sony double din unit. Will this be all I need to do or will the signal still be boosted going to the factory amp?
that is all you need.
When I turn 16 my mom is gonna give me her 06 TL can't wait😁
I have a 2006 Acura Tl no nav im having the no sound issue i get that i have to wire tap the red and yellow wire but to what wire?
To the amp turn on wire coming from your Aftermarket radio, it's normally blue or blue with a white stripe. It will say remote or amp turn on
@@MobileMaxCarAudio I see a blue with yellow stripe that says remote control
The blue with white stripe says p control while the full blue wire says ant control
@@off-the-senzu5049 use p control or antenna don't use remote control blue yellow is for steering wheel controls what do you have a JVC/Kenwood
@@MobileMaxCarAudio yeah i have a kenwood
Hi good video but I’m confused. Can’t you use the ground wire and connect it to the parking bypass? To watch videos as you drive?
Yea you can
My navigation isn't working after I installed everything I used a 68 ohm resistor and still nothing any help?
Oh wow. You release this after DAYS I did mine LOL. I’m upset! I struggled with mine and I’m without a sub right now and would love to know how to my single din connected to the factory sub
You lose amp/factory sub and center speaker support with aftermarket radios. Unless you follow his directions
Hey we hope this video helps you!
I wanna buy one of your full kits complete with steering wheel controls and everything but I’m unsure of the size of the dash, would you help me out ?
What do you mean the size of the dash? The dash kit will hold any standard double din radio.
Will i lose any speakers with exact same set up?
Yes you will lose the center channel speaker that is used for route guidance by the factory navigation
can i connect amp turn on to cig lighter or do i splice it with the pwr antenna wire.. stereo harness doesn't seem to have amp turn on wire
What year vehicle and what harness are you using?
Hey I’m really confused I wanna install an aftermarket radio in my 06 tl but I’ll put installing subs in it do I need to do all this as well??
Just run the RCA cables like normally when installing an amp just extra work for the aftermarket radio
I took out the factory sub so I didn't need to wire the subwoofer inputs just had the rca coming out the back of the aftermarket radio
Ps just saying but a rhino sealed probox for 2 12's fits perfectly inside the back of the trunk allows for lots of space and sounds good 👍
@mobilemaxcaraudio where did you get the wiring harness for the 07-08 tl that you can just plug and play without wire tapping anything?
mobilemaxcaraudio.com/shop
How much for the 2004 acura TL aftermarket wire harness
I've heard that some people have lost sound in the sub after installing aftermarket stereos in the Acura TL. Anyone know how accurate this is? Or if this has happened to you?
our harness ensures that you retain the factory subwoofer and the navigation.
Hey what about if I wanna use the amplifier in the aftermarket unit how would I go about this?
if you want to use an aftermarket amplifier?
@@MobileMaxCarAudio He probably didn't watch the whole video
With this guide, if I understood correctly, you are still going to be using the Factory Amplifier & Subwoofer.
Edit: If my statement above is correct I'll surely be getting one of these DIY sets.
Great video guide 👍🏼