How to replace battery in First Alert Smoke Detector
Вставка
- Опубліковано 4 жов 2024
- How to stop a chirping smoke detector. Remove, install and replace a new battery (9 volt battery) in a First Alert plug in smoke detector and carbon monoxide detector. First Alert Model No. 9120B
First Alert 9120B
People come to a site like this for help, not for a comedy show. A total time of 3:05 could have be completed in under a minute. Your assistance was greatly appreciated and worked, next time leave it at that.
I loved the comedy!😊
You did everything but show us how to replace the battery.
Mannnnnn that’s exactly what I was saying. Like get to the point. We understand that you’re pissed, that the chirping woke you up, in the middle of the night geesh 😂 all that talking for NOTHING.
How do you get the battery in!?!?!?! WTH Literally had no problem opening it. Can't get the battery back in smh
Yes!!!
Oh no!
Yep, that's what I needed too.
Total lifesaver... this thing almost was on its way to being under my foot in a thousand pieces on the floor... great video! saved me from having to buying a new detector.
And here I am at 2:11am about ready to pitch the damn thing in to the street because I couldn't figure out how to get the damn battery out! Everyone loves tall ceilings, until you have to change a smoke detector battery in the middle of the night! You said it, "Hell hath no fury! I know it sucks having to be the pathfinder for all of us following in your footsteps, but I am very grateful you posted. I agree with Robert, "Total lifesaver!"
Lmaoo I am watching this in the middle of the night thank you so much for this video because I was literally just about to break it. They built it that way on purpose so that we could all go crazy and just buy a new one 🤦🏻♀️
No husband here, but why this things go of in the middle of the night. Thank you for this video. You saved my life.
You sir are the her we needed. Thank you from all fathers and men
I'm glad I saw your video I almost wound up breaking mine because of that accursed pin
Priceless! Thank you for pointing at this stupid pin, cause I was that close to smashing that thing with the hammer!
Your instructions were helpful. After figuring out that the + Positive terminal must go into the battery drawer facing the inside of the detector I managed to squeeze the 9 V battery into that weird curved compartment (for a rectangular battery!?) and closed the battery door and put the detector back up into it's base...BUT the damn thing was STILL chirping every 30 seconds! So I gave up and sat down and then, about 5 minutes later, I suddenly realized that I'm not hearing the loud chirping any more! So thankfully I then realized that the chirping doesn't cease immediately (at least not on this model First Alert smoke detector) and it takes 2 or 3 minutes after you install a new battery until it finally, finally stops! That's a little fact that nobody ever tells us.
Thanks for this video. I was going crazy trying to figure out how to open the battery compartment.
Life saver!! When these dumb detectors started failing (I have 3 that went around the same time after I purchased my new home), the constant random chirping drove me crazy. I tried opening one with a screwdriver b/c the main latch wasn't working, and it wouldn't open. I broke one of them before coming to UA-cam to see what others had to say. Great video and helped me save the remaining 2 dectors.
THANK YOU! I couldn't figure out how to remove the batteries, never would have found the lil tabs under them to press them out.
You have no idea how to help me and you are absolutely hysterical! I agree 100%. I just wish I had a husband here to do it for me and that was scary and I did have to break it with a screwdriver.😂😂😂
The only thing missing is how to position the battery in the little drawer when you FINALLY are ready to put a new one in. 😮 We had to fiddle around with it so I took a pic for future reference. I would post it if I could figure out how ....
When you insert the new battery, the terminals should face the inside of the device. The position of the + and - terminals doesn't matter.
Thank you so much. You save my night. I don't see the pin until see your video.
I appreciate you soooooooo much! This helped me get mine open so I could swap out the battery. 😱 so funny that both of mine started chirping at the exact same time. We had lightening last night really close, so I wonder if something was affected.
😂😂😂😂 we love your humor yes and that darn thing pinched my hand just like you said great😅 video 🤟
Thanks for telling us about the battery compartment pin that keeps us from opening the battery compartment. Otherwise I wasn’t sure how to get the old battery out without breaking the plastic door.
I have one of these in my RV and it drove me crazy trying open the SOB. Thanks !!!
I am watching this at 1 am as I can't open that damn battery compartment. Thank you. Am about to go try.
You just saved my life.
Your voice is an exact match(to my ear) another youtube named Viva Frei..thought I was listening to him the entire video lol
That was perfect. Thank you. I was house sitting and you showed me what to do. You rock l! 😊
Thanks for this video! My mother was kept up all night by this chirping. Thanks to you, I was able to get it sorted. Appreciate it, buddy!
Sir, you are a man after my own heart! Even a comment about those (fucking) engineers!
A thousand humble thank-yous to you. This is better than the second coming 😅
Yeah, thanks for adding a little humor to my early morning...at 2:35 am this morning, I heard the familiar chirp chirp chirp...I had to stand under four different ones to find it! I got it down okay and as you said no way to open it! My problem is there was no pin! What bright person thought this up? And of course I did not have a 9 v battery, but every other type, and I had just donated a brand new detector that had been in my cabinet for a decade. So, with nothing to lose, I took a screwdriver to it and managed to have my way with it, and it opened without breaking anything! I went ahead and closed it, since the detectors are all 15 years old anyway and I would just buy another as I am so irritated...but it opened back up! At least your video allowed me to see the problem right away, and that it wasn't ME! Glad I choose yours first! On with my day as I am wide awake now! Thank you!!!
Your story was mine at least twice...middle of the night, can't figure it out...that's why I made this video!
Thank you! My little doggy was going nuts with the chirping, which started of course, while I got into what was supposed to be a long got shower. I cannot fathom why they made it so complicated to open and install the new one.
Dude you are hilarious. I was so aggravated and you made me laugh out loud. I think the engineers of these godforsaken devices are evil dwarves from hell.
Total lifesaver 😍🙌 Thankyou 🤍🤍🤍
I believe these things can actually kill a person. I am 75 years old, overweight with poor eyesight. I live alone. Every time the smoke detector chirps it is always late at night, like between 12 and 3am. I am not too steady on my ladder and much less so at that one of the night in y nightgown and bunny slippers. It is no easy chore getting the ladder from the garage and trying to change the battery while still groggy from sleep. I have almost fallen off the ladder more than once performing this athletic maneuver. I am looking for a quality, reliable 10 year battery to replace in my smoke detectors. I figure I could be dead by 85 or perhaps deaf so the chirping would not even bother me. Any suggestions? Please, I don’t want the cheap China battery I bought for my leaf blower that lasted 3 months.
Call a neighbor. Ask for help. Do not try to do it yourself. It is not worth it.
Thank you. I was ready to throw it across the room.
omg thank you. I was about to break mine.
Thank you!!!! I'm not alone. It's brand new, purchased today. When i tried pulling out the tab in order to activate it, the tab got stuck half-way out and i can't remove it, thus prompting me to try to open the compartment. Ugh! Plus, , as soon as i activated it, it started chirping 1x every min, indicating the battery needs replacing. It's going back and I'm getting a Kiddie or something else. Thanks for your video. Misery loves company.
Thank you ! You are amazing
Thank you for alerting me to the pin. I was going to take a hammer to this then.
This is so crazy. I opened one and a little piece of plastic broke. I actually broke the little pin and I didn't realize it. Then I realized that it was the other smoke detector that was beeping... but I couldn't figure out what I did right the first time as I forced it open.😅 This video surely helped me because I just simply pulled the pin out.. Thank you!!!
These damn things go off at the worst time at night like it was said 3ish am. Had two at the same time and didn’t know about that pin in the back till watching this. The contractor should of took those out and left them out to make it easy on the homeowner. Either way I finally got them changed out and will keep a 4 foot ladder and new batteries in the house. I keep them in good condition so too my daughter likes candles in her room
You are a friggin genius! Thank you
thank you! the pin on my model was even smaller than yours and I had to use the sharp point of a knife to pull it out. talk about being counter intuitive....
Great video on being disillusioned with a plastic pin, which somebody installed after the first battery was installed.
PS. Thanks for NOT showing how the actual battery is put into the device.
When you insert the new battery, the terminals should face the inside of the device. The position of the + and - terminals doesn't matter.
Thank you this was very helpful....
Thank you Thank you Thank you!
Hell hath no fury as a widow who has never had to do such a thing lol!
Great instructional video. Great sense of humor while saving someone like me from going bananas. I would have broken it if not for your video. Thanks!!
THANK YOU!! ...I took a hammer to the last one. ...at 3 AM.
OMG I FINALLY FOUND THIS VIDEO after I figured out the pin 😩😩😩😩😩
I can’t for the life of me figure out why it was necessary to double-secure a battery bay with an extra, hidden pin.
@@Jcollegio ugh saaaaame
@@Jcollegio you are doing GOD’s work! My whole household We thank uuuu ❤️❤️🙏🏾🙏🏾
Simply to drive us mad
You saved my life! Chirping at 1:30am. Dog is howling! Kids are crying! I was ready to hit it with an axe.
I am up at 3AM replacing the battery in this thing. My husband sleeps through everything!
3:56 am here. JC thank you for the video. I have been getting very upset trying to end my torment. I appreciate your providing this. Can anyone get me the names of the engineers who designed this evil device?
Love the opening line. 😂
For those who break it. It's more money First Alert can make for new bought Alerts.
Love the video, you helped us get rid of the chirping, but HOW DO YOU PUT THE STUPID REPLACEMENT 9V BACK INTO THE BAY??? I'm going insane with this stupid device!
apparently: the + Positive terminal must go into the battery drawer facing the inside of the detector. then you just slide the bay closed and the battery automatically makes the required contacts.
@@RedroomStudios p.s. Also, it doesn't matter whether the positive or negative terminals are on the right or the left. It works either way.
Aha I am the husband and the wife in my home having a 2 way dialogue with myself at 3am when two of these went off. One saying ignore it go back to bed. And the other, find a video and make it stop 😂
completely empathize (about the unnecessary locking pin). now, are you going to tell us how to install the battery, please?
When you insert the new battery, the terminals should face the inside of the device. The position of the + and - terminals doesn't matter.
One of life's mysteries, they always go at night, thanks for the help. I don't have the pin, the door won't open far enough to get the battery out, who makes something like this.
THANK YOU!!!
I thought I needed to take the whole thing apart to get the battery changed..I'm use to plugging the connector on the 9v battery and the way the old battery came out with no connector made me think the battery was maybe a spare
Incredible video. Thank you for your service. Instant like and sub. #GreatDesignFirstAlert
You freaking got to be kidding me. A damn pin WTF! Thanks
Im pretty sure that pin is suppose to be removed when they install the smoke detector, i have this exact same model in my home & none of them have the plastic pin in it. The folks that installed those in your home either didn't know what they were doin or they did it on purpose to mess with the homeowner when they replace the batteries. Anyway you should remove those pins in the rest of the smoke detectors in your home that way you can replace the batteries in the future without even removing the fixture from the wall they made those so you can replace the battery as it is mounted on the wall once those pins are out you can pop open the battery compartment no need to unlatch the detector and definitely no need to pull out the wire harness.
Thanks for the tips.
You rule thank you
The pin is a locking device that’s for multi family homes to keep people from tampering with the device. Just take the pin out and leave it out. Problem solved
but couldnt they just search this video on youtube as well?
As you just said all you have to do is remove the pin making the anti tampering completely meaningless and just makes the product design stupid
I'm glad I'm not the only one this mad about this lol.
Are you helping people change the battery or talk about your frustrations?
The pin was placed there so tenants/homeowners don't remove the battery to power their kids toys.
but couldnt they just search this video on youtube as well? this is a good example of over thinking something.
It was designed this way so you angrily smash it against the floor and buy another - a form of
designed obsolescence.
When you insert the new battery, the terminals should face the inside of the device. The position of the + and - terminals doesn't matter. You're welcome.
It would've helped had you showed us how to place the battery in
Your 1/3rd failure rate between 10pm and 6am is incorrect. Unfortunately it's closer to 99%. By design.
I didn't even know I had one of these until it started chirping at 3:15am.
Unfortunately, the battery replacement didn't work. I don't know if I have a bad batch or if something else is broken (it has a screen and said "BAT" on it, I doubt it's referring the flying ones or the baseball ones), so I had to unplug the thing entirely until I can find a new battery.
If I never comment again on UA-cam, you can guess why.
What in the Shakespeare 😂
Yep, failed at 1530 hours during an arctic blast during a power outage when it was 10° outside & just slightly warmer inside & the ceiling is 10' & it's an already precarious situation. Who are the guys that designed this!?
nice gesture to help out but the camera is moving a lot so very annoying
If you read the manual the pin can be installed in rental property to keep tenants from disabling it. The pin is not installed in the one I bought. It can be pried off the base and used if you want to.
Thank you!
so renters arent able to search for this video? come on. its just foolish over thinking by the company.
Thank you!!!’
That pin is optional at installation. who ever installed the smoke detector put the pin in.
I still don’t know how to replace the battery because all I hear is whining with no show on how to install the battery into the slot.
I don’t know how it’s possible to sleep through it. I usually try for about the first 10 beeps.
Thank you! Thank you! That friggin pin.
What on earth is the purpose of that friggin pin??
@@Jcollegio from the instructions on their website, it seems that the pin is designed for apartment when you don't want your tenant to remove the battery. That really sucks though...
Well Done sir
You need a flat head Phillips screwdriver and a paper clip!
Ok but how do you put a new battery in? I can’t remember how I removed the old one and I can’t figure it out 😅. I put it in and the test buttons not working.
the + Positive terminal must go into the battery drawer facing the inside of the detector.
Thank you thank you.
But HOW do you pull the pin out? The instructions on the back of the device say "to discard battery remove pin from under this label." So I had to scratch away at the label to reveal the pin, but the pin is completely flush in the device. HOW can you grab it to pull it out?
OMG... So after about 20 minutes going at this stupid freaking thing with the smallest flat head screwdriver I have, I was FINALLY able to pry out that stupid freaking pointless pin. And, yes, as everyone else has mentioned... Middle of the night... I swear they program these things to go off at that time. 🙄😒
Going through hell trying to change the battery on this.
It’s called repeat business when you break in ,
Problem is is that I have a model no. 9120 not a 9120B
Are these friggin things also programmed to chirp in the wee hours of the morning?
I just want to know how to orientate the battery.
I felt that pain..😂
If you replace using this SC9120B, I highly suggest you dig the plastic pin out BEFORE you replace the unit...so that years down the road when it starts chirping demanding a new backup battery, you can EASILY open the battery door and not have to DIG the PIN OUT later! C'mon First Alert, do away with the stupid plastic locking pin, you have a LATCH there!
Why would them not take the time to list positive location!
Its not the middle of the night , 8pm, but Im about to smash mine. Id rather burn than to deal with this shit. It’s a nightmare
to get the battery in a curved slot !! No wonder why it was on clearance.
I literally just broke the pin because I had no idea how to open it 🤦🏽♀️
My is like that but no pin showing and can't open it and my old man gets real mad,don't want him to break it ,because we live in a housing authority place and it's Friday night no maintenance to call until Monday
"How to replace battery in First Alert Smoke Detector" So how do you replace the battery?
I wish you had shown us how to insert the battery. That’s not intuitive, either.
Euhhhh thanks for saving me
Wtf do you put the battery though
correct!!! because this device is HARD to change it