Why have I only just found your videos (which are way better than anything Boss have done on the subject? Have Boss even bothered to put them on their page? Don't get me wrong, I love Roland/Boss but what they don't know about social media is a lot. You've sold me on this & my future setup.
Aalics Bronson you want to go to the menu under midi - midi setting- sync clock set to auto or midi auto. Be sure the external controller is set to midi out and you should be good! Lmk if this helps.
Austin, Do you know of an instructional video on how to take a recorded dry guitar part and route out of DAW, into the SY-300 via USB for "re-amping" and back into the DAW via USB to record the SY-300 sound? Thanks!
Hi there! Quick question!in a big pedalboard with compressor eq whammy ts808 delay reverb.... where should I place sy 300 to have less noise comin in the loop?
I'm running a 3 amp system so wet stereo and one dry signal to the third amp. I was wondering is the through output always engaged even with the guitar synthesizer sy-300 off... So in essence I could get rid of my line selector pedal for my third amp as to open up my pedalboard.
Hi, I have my guitar going to my amp (using thru) and synth to pa. I can get guitar plus synth with the sy300 ON and guitar only with the sy300 OFF but how do I get synth only? Can I do something with sub output and CTL? Or thru and CTL?
Hi Austin, Thanks for the great work out there. Here is my question: I would like to connect my SY 300 via midi-out to an external sound module so that can play a piano sound for example from the external module. As external modules I have the Maschine MK3 and the TC-Helicon Perform VE. The purpose is not to control the external module, just to be able to play its sounds. Thanks for your help. Mamadou
Hi Austin, I have a Sy 300 and a Boss FV 500 L pedal. I followed the instructions to set up my BOSS FV500L as an expression pedal, but it does not work. Could you help me please? Thank you.
Hi Austin another useful video I am running my sy 300 in my GT 100 do you have any tips for this ? some of the sy 300 patches are to loud or not loud enough how would you alter the volumes on the patches cheers ,..........
Austin Sandick Thanks Austin !!!!! By the way I have a question I would like your help I somehow accidentally turned the LED lights off on my A and B banks on my GT100 would you happen to know how to turn them back on Cheers ......
Does the Phones output is stereo or mono? And when sub output is put before lets say just after osc1 does main output receive osc1 aldo or its stopped by sub output routing? Thks
Why have I only just found your videos (which are way better than anything Boss have done on the subject? Have Boss even bothered to put them on their page? Don't get me wrong, I love Roland/Boss but what they don't know about social media is a lot. You've sold me on this & my future setup.
Peace and Respect.... looking to control the tempo via tap temp from ext midi controller, can you help me with this?
Aalics Bronson you want to go to the menu under midi - midi setting- sync clock set to auto or midi auto. Be sure the external controller is set to midi out and you should be good! Lmk if this helps.
why would I move the P.SUB in the output routing? What do I achieve by doing so? (Sorry I am not very familiar with such things). Thank you!
Austin,
Do you know of an instructional video on how to take a recorded dry guitar part and route out of DAW, into the SY-300 via USB for "re-amping" and back into the DAW via USB to record the SY-300 sound? Thanks!
Nice video! Thanks! I was wondering how to rout my guitar differently but was too lazy to read the manual :)
Many thanks dear Austin.
i just wanna know if i can play vst instrument boss sy- 300
Hi there!
Quick question!in a big pedalboard with compressor eq whammy ts808 delay reverb.... where should I place sy 300 to have less noise comin in the loop?
I'm running a 3 amp system so wet stereo and one dry signal to the third amp. I was wondering is the through output always engaged even with the guitar synthesizer sy-300 off... So in essence I could get rid of my line selector pedal for my third amp as to open up my pedalboard.
Hi, I have my guitar going to my amp (using thru) and synth to pa. I can get guitar plus synth with the sy300 ON and guitar only with the sy300 OFF but how do I get synth only? Can I do something with sub output and CTL? Or thru and CTL?
Hi Austin,
Thanks for the great work out there.
Here is my question:
I would like to connect my SY 300 via midi-out to an external sound module so that can play a piano sound for example from the external module.
As external modules I have the Maschine MK3 and the TC-Helicon Perform VE.
The purpose is not to control the external module, just to be able to play its sounds.
Thanks for your help.
Mamadou
Can this be done?
Hi Austin, I have a Sy 300 and a Boss FV 500 L pedal. I followed the instructions to set up my BOSS FV500L as an expression pedal, but it does not work. Could you help me please? Thank you.
Hi Austin another useful video I am running my sy 300 in my GT 100 do you have any tips for this ?
some of the sy 300 patches are to loud or not loud enough how would you alter the volumes on the patches
cheers ,..........
Perhaps making master preset output levels for each patch would be best for your situation.
Austin Sandick Thanks Austin !!!!! By the way I have a question I would like your help I somehow accidentally turned the LED lights off on my A and B banks on my GT100 would you happen to know how to turn them back on Cheers ......
correct way to connect a pedal (overdrive maxon od808) to sy 300 with amplifier?
Cristian Peralta try both ways. Ive had good results with OD both before and after the sy300.
i wonder what p subout function is for
Does the Phones output is stereo or mono? And when sub output is put before lets say just after osc1 does main output receive osc1 aldo or its stopped by sub output routing? Thks
Jualroyal phones output is always stereo. Main out put will recieve anything past the sub output.
getting me one today :P