4-Split-Cup Pour of Glitter Resin: Was It a FAIL??
Вставка
- Опубліковано 29 вер 2024
- I recently bought some sectioned silicone pouring cups from Let's Resin, and I decided to try using the 4-compartment split cup to pour four different glittery resins onto a tumbler, to see what would happen. And it did not turn out the way I expected (so what else is new?! 🤷♀️). But how did it turn out? Well, watch this video to find out! Some will possibly love it; some will most likely hate it, but overall it was definitely an interesting experiment and one I'd love to try again with different materials. The acrylic paint pour gods laughed and laughed and laughed.
Buy my tumblers here:
luxindaswirl.e...
Amazon Prime credit card* (earns 5% rewards): www.amazon.com...
=====Ways to help and support my channel or any other UA-camr's channel=====
==Like a video, share a video, subscribe to the channel
==The "Super Thanks" button directly underneath the video (where the like 👍 is, then to the right -- look for the 🤍 with a $ in it) allows you to directly support your favorite UA-cam Creators.
==Become a valued member of my channel by clicking the JOIN button just below the video (no obligation at all!) or sign up here: / @luxinda
==www.buymeacoff...
My Amazon Storefront*:
www.amazon.com...
MATERIALS USED IN THIS VIDEO*:
Silicone split cups: amzn.to/3miQDzt
NEATO printable vinyl: bit.ly/3lHM9hw (March 2023, 50% off 10-pks, code MARCH50 or 25% off anything, code MARCH25)
Mr Nola's Glitter: bit.ly/3kDEc0B
Fran's Glitter: bit.ly/3J6HbrP
Metallic flowers art: bit.ly/3ZgwgRR
Marabu alcohol ink: amzn.to/3ZcKp2s
Embossing heat gun: amzn.to/3KPVbHy
Tray mold: amzn.to/3ILMw6f
Mold Release spray: amzn.to/3kLF0An
==Other Materials I prefer*, with Discount Codes:
KS Resin Liquid Stone Ultra UV: bit.ly/2N4JX3i (Coupon Code "LuxSwirl" for 5% discount)
WOODES GOODIES, 10% discount on most items use code "Luxinda":
www.woodesgood...
MAKERFLO tumblers: bit.ly/3FJsIyR
NEATO printable vinyl: bit.ly/3lHM9hw
T-REX alcohol inks: bit.ly/3J7hODc
FOILS & adhesive: bit.ly/3o4AwDJ 10%Discount "Luxinda"
APS FOIL CLUB link here: bit.ly/3WMyCq3
ZURI silicone molds: bit.ly/3w84kSZ
A-Sub sublimation paper: bit.ly/3fdO8uw
Koala products: bit.ly/3dQXwUM (code "luxinda")
Hiipoo waterslide paper: bit.ly/3quMCaR 10% code "LUXSWIRL"
or on Amazon: amzn.to/348G6hz
Hiipoo sublimation paper: amzn.to/3R3jOAy 10% code "LUXSWIRL"
Hiipoo sublimation ink: amzn.to/3C9ri0J 10% code: 4JEC46CV
* As an Amazon Associate I earn a small commission from qualifying purchases, at no extra cost to you.
#glittertumbler #splitcuppour
Luxinda (Cindy) Deskins
PO Box 974
Ranson, WV 25438-4974
Lux.Tumblers@gmail.com
** Efforts I Strongly Believe In **
Getting plastic out of our oceans -- teamseas.org/
Emergency food relief -- wck.org/
Music in this video:
Daily Beetle by Kevin MacLeod is licensed under a Creative Commons Attribution 4.0 license. creativecommon...
Source: incompetech.com...
Artist: incompetech.com/
While I realize blending is what resin will always do, I still want to try again, just with a much thicker fast-set. Should I do glitters again, or micas, or both??
I'm thinking both. I've done something similar. Only in flat molds. Bookmarks mainly.
Maybe let the epoxy sit and thicken before pouring?
I would say both the mica will help thicken resin too, maybe less blending that way? But definitely use a thicker resin also.
@@kimberlywebb2257 definitely with the mica!
I'd do two micas and two glitters. Maybe a fine glitter and one chunky glitter.
It turned out beautiful! And the graphic is perfect for it.
Thank you!!!😊😊🥰🥰
I’ve had so many projects I’ve had to just push off to the side and come back to with a new mind set 🤣 love the flowers you added! Looks fabulous!! 💖💖
Thank you!!! Yes, the ability to “Pivot!” when working with resin is all too necessary sometimes 😅😅😅
Beautiful!🌹
Ahhhhh finally someone posted the frustration! Thank you. Im only halfway through but im smiling at your text. I felt your pain 😂❤
It worked out beautifully. I'd say a thicker resin maybe a colored base and maybe just two or diagonal stripe pours down the cup? Hell if I know really.... it definitely blended and ended up with a dump cup glitter vibe which isn't a bad thing I like the bit of added ink. I'm surprised you did stop at the top and bottom I'm not sure I'd have resisted the urge to keep going 😅 the flowers pulled all of the colors together!
Thank you!! It begs to be retried with variations, doesn't it? Futz, futz, futz 😁😁
I get what you where trying to to, I've done it with lighter molds But its still pretty, I do like it.
When I do my first cup I'll have to load it because I know it's going to be aweful! Lol
Should have put the tumblers in the tray with bottom of tumbler facing up and poured the glitter stuff on the bottom letting it go down the side that way. Maybe that might work. But with less resin
Wow what a difference a decal make - very pretty - enjoy your weekend
Thank you!! Yes, graphics can make all the difference 🥳
9:17 beautimous! Lol I thought my daughter was only one to say that!
Not a bad looking cup, considering it wasn’t how you wanted it to come out originally
Thanks! 😊
I actually loved this even from the point you were not loving it. When you started adding inks i was like...NOOOO IT'S PERFECT!!! But what do i know, I'm colorblind 😂😅😂😅. The main reason I'm scared to go LIVE because I'm afraid people will bash my work when it doesn't work out. But from my eyeball standpoint, it was gorgeous.
Thank you!!😊😊
of course, i commented before i saw you add the ink lol
add ink spots and see what happens! I love your content!
I know it’s not what was in your mind starting, but I think it turned out Beautifully!! Thank you for the Welcome!! You have gave me so much inspiration!! By the way when you was fussing with it I was expecting a bird to fly through the video!! (I would have!!!!) 😂😂😂😂😂😂😂😂😂
Thank you very much!! Oh, that would’ve been awesome!! 😁🦅
I really like them both ❤. I have two cups on my shelf that I just don’t know what to do with it 😂 because it didn’t turned out how I wanted. The struggle is real 😩 Love the flowers 😊😍 stay blessed love 🥰
I wonder if mica’s would give a different look? 🤷🏽♀️
Thank you!!! Yes, it can be difficult to find the way out when a cup goes sideways. And I’m sure mica powder in the resin will change things at least somewhat. We’ll find out 😊😊
Both turned out beautifully!! I have one of those four chamber resin/paint silicone cups, never did use one when I did paint pouring. I do plan on using it with resin though! Have a great evening
Thank you!!!😊
Even when you are not satisfied your projects are AMAZING! P.S. I wish I could get rid of my muffin top that easy 🤣
Thanks very much!! Oh, me too! 🙄🤣
I really like this one. I'd love to see maybe a feminine rustic style tumbler. Could do a soft pink glitter blend with some brown inks dropped throughout the cup and incorporate a graphic that says country girl.
Thank you!! Oh, that sounds very pretty -- great suggestion!
I freaking love your videos. You crack me up. I got fired from my job Friday and I needed a laugh. So thank you. 💜
Oh, I’m so sorry to hear that - any good HR person should know never to fire anyone on a Friday, giving the poor ex-employee an entire weekend to wallow. That’s just cruel. But I’m glad my videos help a little bit. Big hugs to you!!!
I think both pieces turned out beautifully
Thank you sorry sharing
God Bless you.
Thank you!!😊😊
Love the music. Think it’s lovely but so much wasted epoxy and glitter.
Well... all the extra epoxy and glitter from the tumbler dripped off into the tray mold with the exception of the muffin top I sanded off the cup the following day. That took a lot of time to sand, but the actual amount of resin and glitter sanded off was minimal. 😊
My first time watching you, 3-11-2023, and I think the set is beautiful!
Thank you so much, and welcome!!😊😊
I really like it. Perfect graphic for that cup....and I'm not a flower person 🙂
Thank you!!!😊 Decals to the rescue! 😅
New subscriber and I think these turned out beautiful even though to you it’s not what you were going for 👍❤️
Thanks so much! 😊 And welcome!!
What about instead of doing the pour while the cup is on the turner, but have the cup stand upright and do the dirty pour that way with a thicker resin...just a wild thought
Thank you!! I would do a dirty pour upright, but for some reason, those videos and tumblers in general are very unpopular - I don’t get it, because I think paint/resin dirty pours are usually gorgeous, but I’ve read sooooo many comments from various folks who say they hate dirty pour tumblers, meaning the cup is upright over a canvas or tray mold 🤷♀️ So I may still do that, but I’m not sure when it will happen.
I'm still new to all this, I realize it wasn't what you we're aiming for but it is beautiful. Love it.
Thank you!! Resin often has a mind of its own 😅
I would do both! I love the cup, even after all the futzing! And I think a thicker resin would help with the blending. I really like the tray also. It's a shame to lose all those colors though. That purple and blue were 💥
Thank you!!! And I agree, but I still have lots of glitter and much thicker resin, so keep a lookout for when I try this again 😊😊
I LOVE it Pretty Lady💐✨I have been wanting to try the pour /two in one method👍🏻👍🏻you think a thicker resin will work better? 🤔Welcome newbies to the world of Swirl🫶🏻✨Ms Cindy is the Bomb💥😍👍🏻👍🏻❣️
Thanks, Kim!!!! 😊😊 I actually have no idea if thicker resin will blend less, but I’m hoping it helps somewhat 🤞
why did you not spray the cup white to make those colors pop?
Because I like how glitter s look on bare stainless 😊✨
They both turned out beautiful
Looks good With the added touch in the end. Were the glitters all chunky cut?
Thank you!! Yes, well, they were all chunky mixes.
While it’s not what you were going for, it still turned out beautifully!
Thank you very much!!😊😊🌺
This color combo would make a beautiful st Pattys day peekaboo!!
As for try again to keep them separate could you do a fast set with acrylic paint or another colorant along with glitter? I’ve never done a multiple pour anything so now I’m extremely curious.
Thank you!! Yes, I think fast-set, thick resin will improve the outcome 🤞🤞Great idea about seeing if acrylic paint in the resin might help! Thanks!😊😊
@@Luxinda can’t wait to see what you do!!!
I think Both cup & tray are BEAUTIFUL.
Thank you!!😊😊
It is always really nice when something we do or make seems to ‘go south’ but then with a simple alteration it ‘heads north’ and turns out wonderful. The end result with the flowers truly made it look beautiful! An awesome turn around. I love it! ❤
Thank you!!! 😊I was quite relieved 😅
Don’t beat yourself up over this tumbler. It turned out gorgeous. I gotta admit I was a little shocked over you using the word “beautimous. I’ve never heard anyone other than my dad use that word. I love it!
Thank you!! 😊😊 Clearly your dad and I learned from the same vocabulary list growing up 😁🥰
Obviously. I catch myself saying every once in a while. 😊
Well, blended or not, I love it and think it's really beautiful. :) I can never get my print and cut to work (the alignment is fine, but it either cuts too deep, or the vinyl sticks so hard to my mat it ruins the vinyl and I've even had it ruin the mat. :( ) Can you tell me your settings on your cricut for the cut portion of the print then cut.
Thank you!! Lately, I've been cutting my printable vinyl on the "premium vinyl" setting with the pressure changed from default to more. I was very surprised to find out that the setting for premium vinyl is quite a bit lower than printable vinyl -- for some reason I would have expected it to be the other way around.
@@Luxinda Thank you so much for your reply!! I will definitely try these settings. :)
You may not have wanted that look but, WOW beautiful.
Thank you!! 😊😊 I've adjusted to really liking the outcome, thankfully 😅
I think it looks great.
That is a beautiful graphic. Where can I find that
Here you go: bit.ly/3ZgwgRR
Turned out beautiful..even with all the futzing 😂
Thank you!!! I do love a good futz! 😁😁😁
Gorgeous! I love it! ❤
These colors scream Easter to me! Love this idea and project
Thank you!!😊🌺 Yes, very spring and Easter!!
I want that tumbler and tray... so gorgeous!!!!!
Thank you!!! I’ll probably put them up for sale in my FB group at some point soon, so if you’re interested, joining the group is easy. Here’s the link:
m.facebook.com/groups/luxinda/
Futzy Mcfutzerson
Use Mr. Nolas Glass Coat. It's pretty thick
Definitely! I will probably use their speed-dry or Artistry Epoxy’s fast-set, both of which are *super* thick, plus fast-set will allow a lot less time for the different colors to over blend. Thank you!
The addition of the flowers completely turned it around. Absolutely beautiful! When you use printable vinyl do you find it hard to remove your image from the backing if you use florals with intricate leaves and such? Every time I try to print something with the least bit of an intricate design it rips when I try to remove it from the backing. Thanks for the turorial. Love the outcome! ❤❤
Thank you so much!! 😊😊 It definitely can be an issue with complex borders. Sometimes I'm willing to sacrifice a little of what's lost during the cut because the main graphic still looks good. Other times, I'll try my best to piece the smaller bits back on once I get the main graphic on the tumbler. But, yeah, it can be an ordeal...
Thank you! So glad to know it's not just me that has a struggle with it! I almost pulled my hair out the other day with some roses on printed vinyl. I wasn't sure if it was just the vinyl I was using or if this is always a problem. I was using htvront printable glossy vinyl. Do you use matte or glossy? Wondering if that might make any difference at all.
@@lynnenc I use glossy white printable vinyl from Neato, but I used to use a matte vinyl, some other brand, and had the same issue with cutting detailed edges…
I think it turned out great! Like a sparkly flower garden. It would be neat to try a mixture of both glitters and micasof contrasting colors, to really see the swirl. 😊
Thank you!! That does sound like an excellent next attempt! 😁😁
Love the flowers! They are Beautamus! ❤❤
Thank you!!! Definitely 😁😁
I would put a wood grain over it and make it a peek a boo.
Great idea - thanks!
I absolutely love your creativity and style ❤
Thank you!😊😊
Nice save.
Thanks!!😅😅
It’s pretty. Love the flowers. ❤️❤️
Thanks so much!! 😊
I LOVE IT! Those flowers were perfect!
Thank you!! 😊🌺🌺
Cindy, I watch your videos for the awesomeness things you create... but maybe more so for the comedy... 🤣 this actually turned out really pretty... 😍
Thank you so much!! Humor usually makes everything better 🤣🤣
You said printable vinyal?
Yes, I printed the “metallic” flowers graphic on Neato brand printable vinyl with an inkjet printer, then used my Cricut cutting machine to cut them out as stickers. This is the printable vinyl I used:
amzn.to/3RjWrFG
Beautiful,you redeemed yourself nicely
Thank you!! 😊😅😅
Absolutely gorgeous I love all the green
Thank you!!!😊✨
Use glitters..the tumbler is very pretty
Thank you!!😊✨
wow what a turn around that was the perfect drab to FAB!!!! that decal you did seriously made it a beautiful cup!
Thanks very much!!😊😊
Beautiful tumbler. I have a question....the metallic flowers on the cup...did you have to physically cut those out after you printed them? Thanks....
Thank you! No, I had my Cricut cutting machine cut them out.
Thanks...I bought the file but have not yet tried to use it.
Sorry..another question. When using your Cricut to cut the flowers did you have to use the 'print then cut' function?
Sorry again, but a follow up question. Assuming the 'print thencut' function was used here for the flowers...did you use printable vinyl for this. Sorry for all the questions.
@@nancyharris9621 yes, these flowers were printed on Neato brand white, glossy printable vinyl ( bit.ly/3lHM9hw ) then cut out by my Cricut using the “print then cut” function of Cricut’s Design Space software.
Very pretty. Love these flowers.
Thanks so much!! 😊
Turned out very pretty
Thank you 😊
Love the way it turned out!!!
Thank you!!😊😊✨
Welcome newbies your gonna love Luxinda & her tutorials
Thank you!!😊😊
That is so beautiful ❤️
Thank you!!😊😊✨✨
They are beautiful ❤❤❤❤❤❤❤
Thank you!😊😊
L💗VE IT!!!!!
Thank you!! 😊😊
Beautiful 😍😍
Thank you! 😊
That came out so nice, the metallic flowers are beautiful 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you!! Aren’t they pretty?🤩
Beautiful 😍
Thank you very much!!😊
Beautiful
Thank you!!😊✨
Gorgeous!
Thank you!!😊
It’s not bad. It looks better in the sunlight and the flowers jazzed it up. Thanks Cindy 👏👍😊
Thanks!😊✨
Cindy Adding those flowers made this tumbler pop !!! It is Absolutely Gorgeous ❤❤❤
Thanks very much!! 😊 I love how those metallic flowers worked in this situation! 🌺
I’ve been there with things going south a lot (just about everyone I touch), thank you for sharing your videos because you are teaching me how to turn that ugly cup into something fabulous without stripping it which is what I always do. The florals that you added just made the cup very pretty. So that goes to show that the ugly duckling is not always ugly.
Thank you!!😊😊✨✨
While it was not what you expected, it turned out beautiful and a perfect look for the decal you used. Thank you! 🤩💐
Thank you so much!!😊😊🌺🌺
I think you're the queen of the tumbler save😂 it would've been nice to see the separate colors but I like the way it turned out!
LOL! Thank you!! Although today the tumbler I'm working on (the video is a couple weeks away) is definitely kicking my behind...
They both ended up gorgeous! I think the alcohol ink really made it on the cup, and the decals are perfect.
Thank you very much!!😊😊✨
I really like this!! The chosen decal goes perfectly with it too! ❤️
Thanks very much!!😊😊
Definitely not a fail. You brought it back to life. ♥️
Thank you so much!!😊😊🥰
I actually love the way these two turned out!
Thank you so much!! They kind of landed pretty far from the original idea, but still worked out in the end 😅😅🤩