I am attempting the same connection. But not able to get the video stream on the ground unit. Checked all the connections and ensured that they are correct. Do I need to configure the IP of the ground unit or camera in any way? So that they are on same network?
Hello, you can download SIYI FPV software to see if A8 can display normally. If it can, copy the RTSP video address of A8 from the software to the ground station.
The equipment in the video is Cubepilot’s Herelink remote controller and air unit. The flight controller is The Cube Orange Standard Set and SIYI’s A8 mini camera. The equipment in the remote controller is QGC and SIYI FPV. If you still have any questions, you can send us an email and we can better help you solve the problem. tech@ worldronemarket.com / tech2@ worldronemarket.com
Hello sir, many people facing issue with herelink and SIYI camera connected via ethernet. After 2-3 boot the transmission not working with herelink and many people also addressed this in Ardupilot discourse. Can you please explain about this
Hello sir I don’t quite understand what you mean. Does it mean that the link of the video stream cannot be used in QGC after it is exported? The address in the video is: rtsp://192.168.144.25:8554/main.264 If you still have any questions, you can send us an email and we can better help you solve the problem. tech@ worldronemarket.com / tech2@ worldronemarket.com
Hello, Sir, we are not only supporting on SIYI products. We can assist you with all drone accessories if possible. Feel free to contact us with questions via email 'tech@worldronemarket.com'
this video has zero information, try using a step by step tutorial as to the connection process. I have the A8 and herelink control system, and this is where I'm stumped. or maybe link to a video that has more info. or has anyone out there successfully done this using aurdupilot and herelink?
Hello, A8 uses a total of four lines to connect to herelink. 1. The herelink data transmission interface is connected to the TELEM1 port of the flight control, and the herelink data transmission line is used. 2. The A8 video output signal interface is connected to the herelink network port. This line must be modified according to the line sequence of the herelink and the a8 network port. It can be modified according to the line sequence in the video. 3. Use the power module to power the flight control and herelink 4. Power the a8 gimbal camera 5. Confirm that the camera IP is 192.168.144.25. The camera defaults to this IP. 6. Install the latest version of SIYI FPV APP in the herelink.
Hello, Sir, sorry for the confusion. The video is just the connection tutorial for the product. If you encounter any problems during this process, you can directly contact us via email 'tech@worldronemarket.com' and we will do our best to assist you with problems. Contact us anytime for assistance with drone questions.
Hello， No image after connecting? Is the wire sequence of the cable correct? Is it possible that the cable is loose. You can try to install the ping tool on herelink, and ping the IP address of the camera to see if there is communication.
@@SaifAli-uk9do Hello, Sir, would you mind to send us an video for your connection, as detail as possible, and share the link here, we will try to assist you with it.
@@worldronemarket ua-cam.com/video/Ksww0CRUjzM/v-deo.html Note: diffrent power sources for SIYI A8 mini and Air unit, also tried to connect the ground between them
Sorry for not replying to your message in time, you can contact us by email From the ping tool test, it seems that the camera is not connected. Try to set Stream Resolution&Record Resolution in the camera parameters: HD
I am attempting the same connection. But not able to get the video stream on the ground unit. Checked all the connections and ensured that they are correct. Do I need to configure the IP of the ground unit or camera in any way? So that they are on same network?
Hello, you can download SIYI FPV software to see if A8 can display normally. If it can, copy the RTSP video address of A8 from the software to the ground station.
please could you tell me the names of the connectors you used
The equipment in the video is Cubepilot’s Herelink remote controller and air unit. The flight controller is The Cube Orange Standard Set and SIYI’s A8 mini camera. The equipment in the remote controller is QGC and SIYI FPV.
If you still have any questions, you can send us an email and we can better help you solve the problem. tech@ worldronemarket.com / tech2@ worldronemarket.com
Hello sir, many people facing issue with herelink and SIYI camera connected via ethernet. After 2-3 boot the transmission not working with herelink and many people also addressed this in Ardupilot discourse. Can you please explain about this
hello Sir, sorry for the late reply. We did not encounter this problem before. So we can not explain the situation. Sorry
Can we. Take this video link to desktop also??
I am facing issues in getting feed to my desktop from herelink
Hello sir
I don’t quite understand what you mean. Does it mean that the link of the video stream cannot be used in QGC after it is exported?
The address in the video is: rtsp://192.168.144.25:8554/main.264
If you still have any questions, you can send us an email and we can better help you solve the problem. tech@ worldronemarket.com / tech2@ worldronemarket.com
how to key maping ?? only SIYI assitant??
Perform channel mapping on the remote control SIYI TX APP. For specific settings, please refer to the SIYI MK15 manual.
Hello, Sir, we are not only supporting on SIYI products. We can assist you with all drone accessories if possible. Feel free to contact us with questions via email 'tech@worldronemarket.com'
this video has zero information, try using a step by step tutorial as to the connection process. I have the A8 and herelink control system, and this is where I'm stumped. or maybe link to a video that has more info. or has anyone out there successfully done this using aurdupilot and herelink?
Hello, A8 uses a total of four lines to connect to herelink.
1. The herelink data transmission interface is connected to the TELEM1 port of the flight control, and the herelink data transmission line is used.
2. The A8 video output signal interface is connected to the herelink network port. This line must be modified according to the line sequence of the herelink and the a8 network port. It can be modified according to the line sequence in the video.
3. Use the power module to power the flight control and herelink
4. Power the a8 gimbal camera
5. Confirm that the camera IP is 192.168.144.25. The camera defaults to this IP.
6. Install the latest version of SIYI FPV APP in the herelink.
Hello, Sir, sorry for the confusion. The video is just the connection tutorial for the product. If you encounter any problems during this process, you can directly contact us via email 'tech@worldronemarket.com' and we will do our best to assist you with problems. Contact us anytime for assistance with drone questions.
It does not work!
Hello，
No image after connecting? Is the wire sequence of the cable correct? Is it possible that the cable is loose.
You can try to install the ping tool on herelink, and ping the IP address of the camera to see if there is communication.
@@worldronemarket I already tried ALL the above-mentioned and double-checked them.
@@SaifAli-uk9do Hello, Sir, would you mind to send us an video for your connection, as detail as possible, and share the link here, we will try to assist you with it.
@@worldronemarket ua-cam.com/video/Ksww0CRUjzM/v-deo.html
Note: diffrent power sources for SIYI A8 mini and Air unit, also tried to connect the ground between them
Sorry for not replying to your message in time, you can contact us by email
From the ping tool test, it seems that the camera is not connected.
Try to set Stream Resolution&Record Resolution in the camera parameters: HD