Herelink V1.1 With SIYI A8 Mini S.Bus Connection Test

Поділитися
Вставка
  • Опубліковано 29 вер 2024

КОМЕНТАРІ • 14

  • @Siddharth_Sharma7711
    @Siddharth_Sharma7711 5 місяців тому

    hiii but i am facing troubleshoot. Can you please guide me .......At first connection camera was worked. Led on camera was green. Than I disconnected camera and connected again. It stopped working and the leb became “Slow Red Blinks”. I updated camera / zoom / gimbal to the lastest version and led became green again. But camera never show picture again.
    If I connect camera direct to computer via ethernet it shows video.
    If camera is connected to Herelink v1 via ethernet, camera not show video, and no ping.

    • @worldronemarket
      @worldronemarket  5 місяців тому

      You can send your questions to our email via video or pictures so that we can better help you solve the problem. tech@worldronemarket.com / tech2@worldronemarket.com

  • @biswajitgope1602
    @biswajitgope1602 7 місяців тому

    I also do the same but my gimble is not moving anyway. what can be the reason behind this?

  • @MarcSay
    @MarcSay 10 місяців тому

    How can I set up the SIYI A8 Mini to auto record videos when it is powered since I cannot use the SIYI FPV app to view the camera feed when using the SBUS connection?

    • @worldronemarket
      @worldronemarket  10 місяців тому

      When using subs control, you can use HDMI to connect to the air unit.
      SIYI FPV only supports video streaming on the Ethernet interface.
      Power on the camera, connect it to the computer via USB cable, and use SIYI Assistant to set it up.

  • @alijnclarke
    @alijnclarke 10 місяців тому

    The herelink's sbus 2 cable doesnt fit into the A8 mini black connectors, how do you make this work?

    • @worldronemarket
      @worldronemarket  10 місяців тому

      Hello,Sir
      The Gimbal Control Signal Cable of SIYI A8 can be connected to the S.Bus cable of Herelink.

    • @alijnclarke
      @alijnclarke 10 місяців тому

      @@worldronemarket the connectors are physically different shapes, least on the newest versions of the A8.

    • @worldronemarket
      @worldronemarket  10 місяців тому

      @@alijnclarke You can modify the wiring of the wire, refer to this video: ua-cam.com/video/NuM9kH9HoZk/v-deo.html

    • @alijnclarke
      @alijnclarke 10 місяців тому

      @@worldronemarket thanks, that’s for Ethernet though? I’ll try that but I need the Ethernet for another device, hence wanting to use the sbus. Thanks for the videos anyway!

  • @farkhodkhikmatov4738
    @farkhodkhikmatov4738 Рік тому

    is it possible to set it up with herelink v1?

    • @worldronemarket
      @worldronemarket  Рік тому

      Hi,
      The camera supports sbus control. Herelink v1 can be controlled using sbus2 connection. Because there are not many remote control channels, the user experience will be poor compared to Ethernet control.

    • @farkhodkhikmatov4738
      @farkhodkhikmatov4738 Рік тому

      @@worldronemarket v1 sucks. What would you recommend for gimbal on version 1 herelink? Any camera recommendations?

    • @worldronemarket
      @worldronemarket  Рік тому

      @@farkhodkhikmatov4738 The direct use experience of gimbal and herelink is not very good, so there is no good recommendation. Many people use herelink + Airpixel Entire + camera, you can try it. ardupilot.org/copter/docs/common-geotagging- airpixel-entire.html