Russel, this has helped me sooooo much! I'm really surprised at the lack of Reaper tutorials out there and I've been banging my head trying to figure it all out. You've seriously made my life so much easier! \M/
My man, I am so glad this helped you out bro :). I want to start doing more Reaper tutorials I just want to see how this one gets received and I will do more. anything specific that you want covered?
I picked up reaper and am learning completely on my own. This clarified a lot, like for instance, me being a numb nut for not knowing I need a cab sim as well. Lol thank you much!
can anyone help me with the cab simulator. The link for it just takes me to a blog and i cant find the download. Ive gotten everything else working but like I said i can not for the life of me find that cab simulator that your talking about
Thanks for the video! I had to find a different cab sim, used Mercuriall - seems good. Also added in ReaGate for noise and Reatune for guitar tuning - worked out really well. Now I have a decent way to play straight in versus using my (physical) amp signal. Now I have to work on the latency/scratchiness. Cheers bru.
Awesome video Russel!! More of these type of videos related to digital amp sims would be great. Do you find that single coil guitars like strats sound weak? Do I need to double track them to get a fatter sound. Do you adjust your Interface's Input level or the DAW's track level? Thanks again for the vids boet
Strats don't sound weak and there is nothing wrong with singlecoils. Double tracking and panning one guitar to the left and one to the right is necessarily to get a stereo image of that track. When this is to thin you can track a 3rd (left) and 4th (right) track. Before doing this I would add a center guitar track and a bass guitar. The bass is the most important part to make a guitar sound massive.
Hey man, my bud Riff Dude hit the nail perfectly, check out this video I did with a Squier Bullet Strat, those SIngle Coils sounded freaking massive. ua-cam.com/video/gXDrik3jQbY/v-deo.html
great tutorial man learned alot from this...i have 2 questions,1 - when i record my guitar cover in reaper it becomes very noisy like squeaks,slide sounds and other unwanted noise even when i play tight2 - is it better to record DI track first then apply amplitube fX or is it better to record with already applied FX (i am new to recording any help would be much appreciated )
Hey man, so I always record with the effect applied, just so that I can monitor it with an amp sim sound, especially for high gain stuff, it's hard to record it clean without any distortion :)
It's possible that the gain level on the amp and/or overdive/boost is set too high. You could try just lowering the volume knob on the guitar a little and see if that helps clean it up. Also, I haven't watched the whole video yet, but in case it's not mentioned, you can run a noise reduction or noise gate simulation before the amp and see if that helps.
What to do if you get a terrible noise in the background when you use the amp sims? I just have my guitar going into my interface into my pc using reaper and the same amp sims you showed, and whenever I arm my recording I get this terrible noise. Any idea on how to get rid of it? The problem only occurs when I attempt to use distortion. Any help would be incredibly appreciated as I can’t find a solution anywhere.
I got it all to work, but how do I get all of the background amp humming noise to go away? Also, I can still hear the clean guitar along with the sims. Is there a way to stop that?
Use a gate to get rid of the unwanted feedback. There should be an option on your audio interface where you can turn off direct monitoring. I have a focusrite scarlett solo, and that direct monitoring button is right above the volume knob to the right
It's silly but I couldn't figure out why my guitar was sound like ass in reaper... as you indicated, it turns out that having the cab sim before the amp plugin was the reason why.
Hope someone still checks these comments lol. I have everything setup right but my guitar just sounds real muddy and notes play on top of other notes I just played, theres reallllly bad lag when I monitor. How do I fix this?
Hi, can you help me? I can only hear the som distortioned by VST plugins when I record it on Reaper using the "Record Armed" red buton, but I CANT PLAY AND HEAR MY SOUND DISTORTIONED, ONLY CLEAN. Do you have any idea how to play hearing the sound with distortions of VST plugins? nice video and thank you.
Go to preferences (ctr + p) and then Device and look if your sound interface is selectet for the input. Does it work now? If not, then tell me I have some other ideas but this is the most common issue
Hey, how do you monitor your audio? I mean, you said on other coment that you create another track but to be able to export what you played during the video. But is there any way of being able to play and listen what you´re playing to be able to set up better volume, tone and etc?
it is tricky hey, but i usualy manage it with the routing inside reaper and I also use OBS Studio as my screen recording software, it has some cool audio routing options that allow me to capture everything in the software as well. I am thinking of putting together a tutorial on audio routing like this.
For all the people saying the OurCabSim link is broken, he also uploaded the file to Google Drive drive.google.com/open?id=1CkyGdfS5o4m3aWAPsAwkz_xD9qxLd0dI
I really don't know what I am doing wrong... I copy and pasted the plugins to the right destination and did the "Rescan" and re-open the program but they are not appearing on the plugin list. I need to finish an EP asap so hope would be very much needed if you have any idea how I messed this simple task up.
I copy and paste the .dll files (such as Emissary.dll) directly into the FX folder that is inside the Plugins folder inside the Reaper folder, e.g. Program Files (x86) - REAPER - Plugins - FX. It then should show up when you next pull up Reaper and click on the track's FX button and then click on the choice at the bottom that says 'Add.'
Quick question, how are you getting your audio playing live through Reaper. Been trying to find ways of playing and having it come out live as I play it and record audio/video at the same time, but am having issues finding a way to do it.Tried OBS and a voxengo recorder plug in but have pretty good delay going on.
Hey man actually quite a cool trick. Create a second track, route the output of your guitar track to that new track, then right click on the arm button and select record output -> Record output: mono. That will give you a track in Reaper that you can then export and then sync with your video in post.
Thanks man, I'll try and figure out where to set the output to the track but appreciate it, I have seen so many people be able to do it and for some reason just couldn't find a way myself haha. Thanks!
I track at 48,000khz with a 128 buffer size and have a 4.2ms latency, he mentioned his was 4.2ms also I believe which is very manageable, I get more of a delay when playing live especially large venues outdoors its way worse. try setting your interface and project settings to these numbers. hope this helps. also I record mostly with my amplifier miked up and record monitoring off and latency is never even an issue plus it sounds better to me.
I was just going to use Reaper as an inexpensive host for all the vst's that I wanted to experiment with before committing to my main DAW but videos like thins are showing me that it has a lot of functionality.
@@ghostwalkergaming5856 Yeah, I figured that out. Now, I just need to get rid of the constant feedback, which sounds like a hair dryer (to me). Thx.\m/
i was having the same problem until i realised the problem was that I had my plugins in random orders. If you follow the order from the video, starting with the tsb then your tone should sound mint.
The signal coming from the guitar directly to the Scarlet will likely either be a little too strong or a little too weak depending on whether you set the input to 'instrument' or 'line.' The DI box is probably to set the signal to a little more of a better usable signal. I don't use a DI box. I use a little Mickie mixer to run into and then into my Scarlet. I'm able to easily set the signal to an optimal level. Before I did that, I always chose a higher level, which sounded fine with high gain amp sims but not so great with cleans.
I can get sound through my monitors with just my guitar but when I make the chain and turn the amp on i can only hear the fuzz of the amp as if nothing is plugged in even though I have everything set as it should be
Crotes1990 hey man. Is the input monitoring on your interface maybe enabled? That would monitor just your guitar DI and not the audio coming from your DAW.
So whenever I even turn on the head, I get unbearable hissing. I've tried many things from eq, hi-pass & low-pass, sound gates, and even turning the gain knob. Im currently using a Behringer umc404hd and any tips of how to fix this would be greatly appreciated. This also happens with any head sim plugin I use.
As someone who went through this entire fucking ordeal to find the simplest/ideal set up for recording....way too much shit to have to hunt down...(impulses, impulse launcher....amp sims to go within that impulse launcher...never sounded as good as i wanted to when all was said and done.... my solution...grabbed me gtr waves for 30 bucks cheap amp sim run my actual pedals into the interface, run a direct signal amp, most of my tweaking for tone is from the pedal board, distortion, eq, noise gate....hope that helps someone
Awwwwww.. You fucking bastard hehe Where did you get an R2-D2 coffee mug like that I'm so fucking jealous i mean respect for the star wars shirt I have star wars boxers so... yeah (Actually maybe that's too much information hehe) but yeah... Mate, Seriously, Matter of life and death here ok DO YOU HAVE A LINK TO WHERE YOU BOUGHT THAT STAR WAS MUG, thanks mate, if you wouldn't mind UPDATE : NOT TO WORRY, I GOOGLE IT , I FOUND IT I'm fucking buying it i didn't know there was an R2 coffee mug like that that is actually sculpted to the right shape, Pretty cool shit be cool mate
![Recording Metal Guitars - Reaper Tutorial [For Beginners]](http://i.ytimg.com/vi/ACSdE8vxXPQ/mqdefault.jpg)
![Recording Metal Guitars - Reaper Tutorial [For Beginners]](/img/tr.png)
Russel, this has helped me sooooo much! I'm really surprised at the lack of Reaper tutorials out there and I've been banging my head trying to figure it all out. You've seriously made my life so much easier! \M/
My man, I am so glad this helped you out bro :). I want to start doing more Reaper tutorials I just want to see how this one gets received and I will do more. anything specific that you want covered?
Riffs And Chugs TV routing in Reaper and configuring it especially when doing multi out for superior drummer to do multi tracks
Scoot Groot, sure man, I don't have a license for Superior Drummer. But let me see if I can borrow a friend's license and get this out.
I picked up reaper and am learning completely on my own. This clarified a lot, like for instance, me being a numb nut for not knowing I need a cab sim as well. Lol thank you much!
How's it going now? I've been learning for a year and still feel like a noob. Lol. \π/.
@andrew sylvester How's it going now with Reaper? It's hard lol. But fun.
A teenager with free tools can get HUGE tone that walks all over some of the most classic metal albums of the past. What a time to be alive!
So this is a thing?! Your tone is absolutely killer brother. and its free! This is a sick option for us folks that cant afford an Engl yet...
Total Reaper noob here and your info got me up and recording. Thanks man !
Thanks Russel ! Excellent explanation, please keep up the good work with your tutorials.
just installed my 2i2 today and fuck it's overwhelming
can anyone help me with the cab simulator. The link for it just takes me to a blog and i cant find the download. Ive gotten everything else working but like I said i can not for the life of me find that cab simulator that your talking about
Thanks for the video! I had to find a different cab sim, used Mercuriall - seems good. Also added in ReaGate for noise and Reatune for guitar tuning - worked out really well. Now I have a decent way to play straight in versus using my (physical) amp signal. Now I have to work on the latency/scratchiness. Cheers bru.
Can you upload this vst somewhere? The link to our cabinet simulator is broken
yes need a new link please!??
sites.google.com/site/ariearadaz/OURCabinetSimulator_v1.0.7.zip
@@intelligenceservices thanks man
Straight. To. The. Point. 🙌
You should set your input gain to peak at -6DB. That removes the risk of clipping.
Also, there's a "Hoo" sound on your mic audio from the room.
HAPPY NEW GEAR 2018 BRO! Nice done mate!
Happy Happy my bro :) Thanks man
Great Video Dude, muuuch appreciated! Quick and detailed enough. Big Thumbs up!
I'm suddenly getting a clean tone in my distortion, an ideas why that is? I'm using a BIAS FX preset. I've been using BIAS FX for a few weeks now.
Lekker chanah! Using this software through reaper and a rocksmith cable into a Roland cube 30. Thanks for this
Really cool and informative video dude,I like your style a lot,great job and thumbs up..thanks so much.
Legend! Perfect timing for me, thanks a ton dude 🤘🤘🤘
Glad I could help my bro :)
I'm having so much feedback did you use a noise gate?
The Guitar Sound is awesome and helped me a lot, thanks. What do you use for sound output? Just pc speakers or back to guitar amp or something?
Matt sithKnight he’s using monitors, everybody uses them for recording as they generally have the best sound quality while mixing
Titans 27 thanks mate, yeah recently looked into it all myself and learnt about it all.
Awesome video Russel!! More of these type of videos related to digital amp sims would be great. Do you find that single coil guitars like strats sound weak? Do I need to double track them to get a fatter sound. Do you adjust your Interface's Input level or the DAW's track level? Thanks again for the vids boet
Strats don't sound weak and there is nothing wrong with singlecoils. Double tracking and panning one guitar to the left and one to the right is necessarily to get a stereo image of that track. When this is to thin you can track a 3rd (left) and 4th (right) track. Before doing this I would add a center guitar track and a bass guitar. The bass is the most important part to make a guitar sound massive.
Hey man, my bud Riff Dude hit the nail perfectly, check out this video I did with a Squier Bullet Strat, those SIngle Coils sounded freaking massive. ua-cam.com/video/gXDrik3jQbY/v-deo.html
For clipping I drop my Interface Preamp gain, and peaking inside the DAW I use the faders and/or Trim plugins
Thanks man!
You rock. Best tutorial.
Thnx man, this really helped me out!
Awesome ^^
Are you South African, btw?
Hey man great video! This D.I. Box is active or passive ?
Thanks man, that is an active DI box. I have switched over to another DI Box though, Video up soon
Thank you so much man! Helped make my ibanez sound a lot nucer
I am unable to download the cabinet. How did you manage it please? Thanks for your help?
THANK YOU so much man, really helpful
great tutorial man learned alot from this...i have 2 questions,1 - when i record my guitar cover in
reaper it becomes very noisy like squeaks,slide sounds and other
unwanted noise even when i play tight2 - is it better to record DI track
first then apply amplitube fX or is it better to record with already
applied FX
(i am new to recording any help would be much appreciated )
Hey man, so I always record with the effect applied, just so that I can monitor it with an amp sim sound, especially for high gain stuff, it's hard to record it clean without any distortion :)
It's possible that the gain level on the amp and/or overdive/boost is set too high. You could try just lowering the volume knob on the guitar a little and see if that helps clean it up. Also, I haven't watched the whole video yet, but in case it's not mentioned, you can run a noise reduction or noise gate simulation before the amp and see if that helps.
I use the TS-999 into the Anvil Lead channel for a JP/djent sound
Great plugins there as well hey.
Cannot find TSB or ignite amps in VST plug ins list...thoughts?
What to do if you get a terrible noise in the background when you use the amp sims? I just have my guitar going into my interface into my pc using reaper and the same amp sims you showed, and whenever I arm my recording I get this terrible noise. Any idea on how to get rid of it? The problem only occurs when I attempt to use distortion. Any help would be incredibly appreciated as I can’t find a solution anywhere.
Man i'm having this exact same problem and a gate isn't really working for me, if you've found a solution id really appreciate it.
When using free plugins, I use two noise gates in my signal chain. I just posted a video demonstrating free amp sims and what I used, links included.
Do you HAVE to have an audio interface JUST to sound THAT good with your guitar tones?
They’re not that expensive tho. You could use something like a rocksmith cable but then latency will be a big issue.
Why do you need a D.I. box when you already have an interface?
if your guitar has a high frequency you need a di to stabilise it. most audio interfaces have them built in
so you are talking specifically about active guitars then?
I don't know the theory, but practically i can say you can get a louder and cleanner sound without turning up the gain on you interface.
I got it all to work, but how do I get all of the background amp humming noise to go away? Also, I can still hear the clean guitar along with the sims. Is there a way to stop that?
Use a gate to get rid of the unwanted feedback. There should be an option on your audio interface where you can turn off direct monitoring. I have a focusrite scarlett solo, and that direct monitoring button is right above the volume knob to the right
i cannot download the cab from either of the links. can anyone please help me with this? thank you
did you ever figure this out?
same
following
This is also a free CabSim www.kvraudio.com/product/nadir-by-ignite-amps
@@oscarottosson8415 is the the NadIR cab sim or the Amp head? or do they come in both?
I want that sound coming from a physical amp. Is it possible??
yes
@@brunoms.7151 and how would you do that? what amp?
You Will need a lot of things.
@@brunoms.7151 any help would be most appreciated...
Can't seem to get OUR cab any more, keeps throwing me to a 404 :(
Hey brother do you have a very slow instruction video on how to double track guitars. and something about a BUS? I'm new to this
jisis bra dankie, this shit helped me out a ton, just trying to sort out latency, im new to this...
Hey man great work! I want to try that but unfortunately all links for OurCabSim are down... Where did you get it?
Hey my bro, Try this link instead :). Thanks for letting me know :)
aradaz.blogspot.co.za/2009/06/our-cabinet-simulator-updated-to-v107.html
yeah, this is the one that is down (because of bloody dropbox)...
drive.google.com/open?id=1CkyGdfS5o4m3aWAPsAwkz_xD9qxLd0dI Try this man, I just uploaded my one to Google Drive for you :)
You rock dude! Thanks a ton!!!!
Hi, can you please dive a bit deeper into the whole letancy issue? because i cant seem to get it to the same levels as you
It's silly but I couldn't figure out why my guitar was sound like ass in reaper... as you indicated, it turns out that having the cab sim before the amp plugin was the reason why.
Is Ignite Emissary supported by Windoes 7, 32 bit (x86 based) PC?
Hope someone still checks these comments lol. I have everything setup right but my guitar just sounds real muddy and notes play on top of other notes I just played, theres reallllly bad lag when I monitor. How do I fix this?
Link to download is broken. Can we get a reup?
Hi, can you help me?
I can only hear the som distortioned by VST plugins when I record it on Reaper using the "Record Armed" red buton, but I CANT PLAY AND HEAR MY SOUND DISTORTIONED, ONLY CLEAN.
Do you have any idea how to play hearing the sound with distortions of VST plugins?
nice video and thank you.
Go to preferences (ctr + p) and then Device and look if your sound interface is selectet for the input.
Does it work now? If not, then tell me I have some other ideas but this is the most common issue
CabSim link doesn't work anymore.
holy shit this really helped!! Thank you!!
Hey, how do you monitor your audio? I mean, you said on other coment that you create another track but to be able to export what you played during the video. But is there any way of being able to play and listen what you´re playing to be able to set up better volume, tone and etc?
it is tricky hey, but i usualy manage it with the routing inside reaper and I also use OBS Studio as my screen recording software, it has some cool audio routing options that allow me to capture everything in the software as well.
I am thinking of putting together a tutorial on audio routing like this.
For all the people saying the OurCabSim link is broken, he also uploaded the file to Google Drive drive.google.com/open?id=1CkyGdfS5o4m3aWAPsAwkz_xD9qxLd0dI
I fucking love you, dude
dued how do i download this stuff everytime i try get the cab sim it keeps sending me to the website over and over
Question: Why didn't you use NadIR, LePou LeCab or Mercuriall Cab (2.1.1 or 3) as the cab simulator?
Ah man all of those are great, this was just the first one that came to my mind when I thought of simple and easy to use.
Got ya, no problem.
I really don't know what I am doing wrong... I copy and pasted the plugins to the right destination and did the "Rescan" and re-open the program but they are not appearing on the plugin list. I need to finish an EP asap so hope would be very much needed if you have any idea how I messed this simple task up.
I copy and paste the .dll files (such as Emissary.dll) directly into the FX folder that is inside the Plugins folder inside the Reaper folder, e.g. Program Files (x86) - REAPER - Plugins - FX. It then should show up when you next pull up Reaper and click on the track's FX button and then click on the choice at the bottom that says 'Add.'
The cab simulator is a dead link I don't think it's around anymore do you have any other ones you like?
Did you ever find one?
@@dylankingery6375 convolution amp/cab modeler is one I have and also a thing called gods cab and I have one called mercuriall cab v3
can you link me another cab sim? the link is broken on the site and i can't download the cab
Get the ignite nadir impulse loader. It lets you run dual irs.
Looks like Cab Sim link is dead. Anyone have any idea where to get it?
could you upload the emissary dll since the DL isnt working for me :/
Nice, try nadir and some impulses to get it ready for the mix
Exactly what I was about to suggest.
Quick question, how are you getting your audio playing live through Reaper. Been trying to find ways of playing and having it come out live as I play it and record audio/video at the same time, but am having issues finding a way to do it.Tried OBS and a voxengo recorder plug in but have pretty good delay going on.
Hey man actually quite a cool trick. Create a second track, route the output of your guitar track to that new track, then right click on the arm button and select record output -> Record output: mono. That will give you a track in Reaper that you can then export and then sync with your video in post.
Thanks man, I'll try and figure out where to set the output to the track but appreciate it, I have seen so many people be able to do it and for some reason just couldn't find a way myself haha. Thanks!
I track at 48,000khz with a 128 buffer size and have a 4.2ms latency, he mentioned his was 4.2ms also I believe which is very manageable, I get more of a delay when playing live especially large venues outdoors its way worse. try setting your interface and project settings to these numbers. hope this helps. also I record mostly with my amplifier miked up and record monitoring off and latency is never even an issue plus it sounds better to me.
what do you mean by export and sink with video? new to this shit lol
Great Help :)
Sick!!
The OurCabSim link is broken..
Maybe this answer is too late, but when I downloaded the STL Tones Emissary, it came with a sort of cab sim called NadIR.
did any of you found it? somewhere
I was just going to use Reaper as an inexpensive host for all the vst's that I wanted to experiment with before committing to my main DAW but videos like thins are showing me that it has a lot of functionality.
Hmmm, only one available OurCab download link, but it's fucked...
gonna sound really dumb, but i can't find where to download the amp sims from those links, can anyone help?
Does this help? I'm new to this, but I got them downloaded from here. www.stltones.com/products/stl-ignite-emissary-plug-in-bundle
Can you do this with the free version of Reaper?
Ourcabsim Link the download link ( drop box ) is dead
hey dude, try this one drive.google.com/open?id=1CkyGdfS5o4m3aWAPsAwkz_xD9qxLd0dI
@@RiffsAndChugsTV Thanks for the reupload! Might want to link that in the desc
@@RiffsAndChugsTV Oh my god thank you!!!!!!!!!
excuse me but where i can find the plug in?
When I record I can hear my distorted tone but when I play back the recording its a clean tone, can anyone help me?
F0njoe you have to turn record monitoring on
Nice axe man
Dude, half of monitor is your image... I understand you are a pretty guy, but seriously... I need the see the program...
Ty
Imagine my surprise hearing a SA'n accent as this vid started haha.
Lekker bru :P
Can you tell us what is the impulse used ?
Thanks
Can you add more plugins in this setup?
Like what if i was to combine this with my purchased Guitar rig 5?
Will it sound awesome?
our cabsim has no link?
did you find it?>
When I add the amp plugin it seems to mute any input into the daw (works fine before the plugins added) any idea on how to fix that?
Arm the red record button at the top left of your track
Hey, my Reaper isn't detecting my guitar, what do I do?
i think you might need to turn on record monitoring
@@ghostwalkergaming5856 Yeah, I figured that out. Now, I just need to get rid of the constant feedback, which sounds like a hair dryer (to me).
Thx.\m/
Is interface needed? Can I hear my self without it?
indeed so, you will need an interface
Does anybody know why I'm not getting any distortion from the amp sim even though I have the VST in my plugins folder?
i was having the same problem until i realised the problem was that I had my plugins in random orders. If you follow the order from the video, starting with the tsb then your tone should sound mint.
What do you use the DI box for it you have inputs on your scarlett
The signal coming from the guitar directly to the Scarlet will likely either be a little too strong or a little too weak depending on whether you set the input to 'instrument' or 'line.'
The DI box is probably to set the signal to a little more of a better usable signal.
I don't use a DI box. I use a little Mickie mixer to run into and then into my Scarlet. I'm able to easily set the signal to an optimal level. Before I did that, I always chose a higher level, which sounded fine with high gain amp sims but not so great with cleans.
I can get sound through my monitors with just my guitar but when I make the chain and turn the amp on i can only hear the fuzz of the amp as if nothing is plugged in even though I have everything set as it should be
Downloaded the amp and IR's no problem. Now I'm having a hard time with the od pedals
Merci ;)
is there a sim for the randall satan on reaper
why do we need a DI box?
I can't download the amps why?
can you do how to make guitar cover
im on mac... no sounds coing at all i have everything downloaded... the monitor thing is on
the dropbox link for the cab sim is empty
Hey bro. I put the Cab sim in my google drive, grab it over here :). drive.google.com/open?id=1CkyGdfS5o4m3aWAPsAwkz_xD9qxLd0dI
@@RiffsAndChugsTV How do I get this out of google drive and into my plugin folder?
Do you think the tone is almost comparable here? SlipKnot Cover: ua-cam.com/video/U8pzHeuTQAQ/v-deo.html
My boet, you sound South African.
You know it bru
Emissary head
Nevermind the monitoring, I can't get any sound out of reaper period, not even for playback. I've set the audio device right and....nothing
Arm your track, click the moniter
It doesn't matter what plugin I use, I just keep getting the same clean sound, soooooo frustrating :(
Crotes1990 hey man. Is the input monitoring on your interface maybe enabled? That would monitor just your guitar DI and not the audio coming from your DAW.
Same here :(
So whenever I even turn on the head, I get unbearable hissing. I've tried many things from eq, hi-pass & low-pass, sound gates, and even turning the gain knob. Im currently using a Behringer umc404hd and any tips of how to fix this would be greatly appreciated. This also happens with any head sim plugin I use.
As someone who went through this entire fucking ordeal to find the simplest/ideal set up for recording....way too much shit to have to hunt down...(impulses, impulse launcher....amp sims to go within that impulse launcher...never sounded as good as i wanted to when all was said and done.... my solution...grabbed me gtr waves for 30 bucks cheap amp sim run my actual pedals into the interface, run a direct signal amp, most of my tweaking for tone is from the pedal board, distortion, eq, noise gate....hope that helps someone
Awwwwww.. You fucking bastard hehe
Where did you get an R2-D2 coffee mug like that I'm so fucking jealous
i mean respect for the star wars shirt
I have star wars boxers so... yeah (Actually maybe that's too much information hehe)
but yeah...
Mate, Seriously, Matter of life and death here ok
DO YOU HAVE A LINK TO WHERE YOU BOUGHT THAT STAR WAS MUG, thanks mate, if you wouldn't mind
UPDATE : NOT TO WORRY, I GOOGLE IT , I FOUND IT
I'm fucking buying it
i didn't know there was an R2 coffee mug like that that is actually sculpted to the right shape, Pretty cool shit
be cool mate