Це відео не доступне.
Перепрошуємо.
Safariland Quick Locking System (QLS)
Вставка
- Опубліковано 10 лют 2018
- In this video, I discuss the Quick Locking System (QLS) by Safariland and the setup of this system on a battle belt. For more information on the QLS, check out Safariland.com
Please be sure to follow me on Facebook @TheLonestarPatriot.
Thanks for watching and subscribing! Keep up the good fight!
~The Lonestar Patriot
Excellent video! Helped me answer the questions I had. Well made, clear, to the point and professionally made (no BS). Wish all videos here were like that. FIVE STARS! Thanks
Thanks brother, I appreciate the feedback and I'm glad it was informative!
Just purchased this exact holster for my G17. I was looking for a passive retention holster that was simple in design, well-made, and allowed clearance for my RMR, suppressor height sights, and threaded barrel with a comp. This fit the bill. Super slick design. The QLS system allows for quick detach from a battle belt and my Gray Man Tactical RMP in my "go" bag. Not exorbitantly expensive either.
Very well explained. New subscriber. Thanks and Blessings!
They must have upgraded their screws. I have the same exact setup except I have a safariland 6337 holster. The screws on the holster are wide and are a lot bigger than what I’m looking at and don’t need any washers they fit perfect. Great video!
So, we're all just going to ignore the fact he has the belt run through the UBL wrong?
isn't you belt run through the UBL wrong? Shouldn't it be behind the middle section and over the sides?
Yes
I just bought one so that I can open carry but now that I'm looking at it in my hands I'm not sure if I should seems a little chunky😂 it is a very good quality holster though do you guys (people who open carry) go with or against this holster being used on a carry belt?
Holsters for glock30 kit for .460rowland .40super .50gi all compensated 4 to + inches tlr lights? Glock 35 & tlr?
Thank you for the info on the system, good overview
Hoorah, brother
Love this system. One bonus I dig, I can leave my belt and drop as is and swap out holsters deepening on what gun I'd like to use / configuration. For comp I run without a light so I use my holster for that. For non comp, I throw the holster that fits the light back on and roll with that. I dig that you can swap them out without disturbing placement on the belt. I have a receiver on a typical belt attachment and paddle as well so I can swap them around. My only complaint is the extra 3/8" it pushes everything out. Not a big deal for comp but not ideal for a paddle if I was planning to conceal. I am thinking of using this for other bits I swap on and off my regularly to make it quick and easy.
Thank you for this video! This is exactly what I needed.
You’re welcome, brother.
The Safariland QLS & MLS System is Easy for a Assailant to Grab with 2 Hands and Depress the Locking Hooks and Slide Off the Pistol. It needs a 3rd Concealed Center Lock Release.
You are assuming an assailant would even know what a QLS/MLS system and how it works?
@@mtnride4930 You are Assumng They Won't.
@@ccfmfg UHHH no I am not but you can go around in circles if you like.
@@mtnride4930 I used to work in both the Federal and Naval Prison Systems and We had Endless hours of Surveillance video of Criminals and Inmates taking turns Practicing Disarming Guards on Them-Selves that We took and were shown to Us in Training. You under estimate the Criminal Element You come across in Life or in Prison and it will get You Killed. If You are Smart out there You will be Safe.
Good video thanks... and for the tip about using the #10 washers, I ordered the male fork for my Safariland holster and just want to thread it through my Molle battle belt. Might end up getting the female part if I just attach to my leather gun belt on occasion.
What's the difference between the QLS22 and QLS22L?
maybe show it mounted next time
May have to give that a try. Nice review. UNCLE DAN OUT!
Well detailed video man. But I just ordered a QLS fork and it came with 6 Allen screws of 2 different lengths but nothing to thread the screws into on the other side. Is this how all forks come in or did I get a product with missing components?
Thanks, brother. That sounds right for the number of screws but typically I'll order the kit since there's a premium for the individual components. Just confirm the proper fit of the screw length to be sure there's minimal projection that doesn't cause interference.
I like it . Great post.
I have some questions. I am needing some help with setting up my safariland on my battle belt with the Molle locking system. Do you know what parts I need to buy from they website to make this happen?
Love mine!
Nice video man!
Thanks, brother!
Should make a video on how strong it is if someone tried to rip your holster off
mayday training has a video of how quick and easy it is to disconnect the holster from someone's belt. he said he's not using it for his duty belt anymore because of that reason.
Nice professional video. How did you mount the Safariland Mid Ride Universal Belt Loop to the battle belt? I can see a heavy strap but don't understand how that part works.
Thanks, brother! The Safariland UBL is mounted through a 1.5" riggers belt. Separate from that, I have a thigh strap from TRex-Arms that runs between the UBL and QLS receiving plate to assist with keeping the holster tight against the body.
JMel he actually mounted the UBL wrong.. The webbing goes behind the UBL not in front.. If you run it behind it helps retain the UBL in place better utilizing the hook and loop between the UBL center area
What exact belt is this?
How did you keep the binding posts from making marks on your firearm? If they aren't planned for in the molding process, how can you add them later and not have them scrape the fire out of your firearm?
Can we see the inside of the holster with this modification on it, please?
The holster was pre-punched from the manufacturer to accept various attachments and configurations so there are recesses on the inside for the posts. Most holster manufacturers are providing these now but presumably yours does not account for this.
What battle belt are you using?
It's the VTAC Skirmish belt.
First by the way!
UNCLE DAN OUT!
Well done, brother! Uncle Dan takes the top honors!
The Lonestar Patriot Dang right swing by sometime.
UNCLE DAN OUT!
#BOWEVERFOREVA!!!
That's an engineering pencil? A killer and an engineer? Lol
So seven plus minutes of video and you never actually show the installation of the mounting plate to the belt or how to engauge/ disengage the holster from the mounting plate?
It's inherently obvious from the explanation and that wasn't the entire point of the video.