Building a Modern TV Media Console, Credenza | Woodworking
Вставка
- Опубліковано 14 жов 2023
- 📌 10% Off Shapr3D Pro Subscription: BevelishCreations10
📌 Download Shapr3D here: bit.ly/3FXbnn9
Plans 👉 www.bevelishcreations.com/pla...
In this video we’ll show you how to build this awesome modern media console. It has slatted sliding doors that can slide across the length of the cabinet to give it different configurations. The doors has a beautiful black finish using Rubio Monocoat. And the drawers has Blum Undermount Drawer Slides. I'm so happy with the way this turned out! Be sure to check out the plans for specific dimensions and a full cutting diagram!
*Thanks to Shapr3D for sponsoring this project! 😊
🍿 WATCH NEXT:
Furniture Design For BEGINNERS in Shapr3D: • Furniture Design For B...
How to Stain and Finish Furniture: • How to STAIN AND FINIS...
How to Install Blum Undermount Soft-Close Drawer Slides: • How to Install Blum Un...
| FOLLOW |
► WEBSITE 👉 www.bevelishcreations.com
► INSTAGRAM 👉 / bevelish_creations
► FACEBOOK 👉 / bevelishcreations
🔧 Tools/Supplies Used (Affiliate) 🔧
** Tools **
■ Tracksaw amzn.to/3GgU5m1 (Amazon)
■ Plywood Router Bits amzn.to/39O9NmQ (Amazon)
■ Thin Kerf Blade amzn.to/46s17P2 (Amazon)
■ Shelf Pin Jig amzn.to/3LVoNmA (Amazon)
■ 1/8" Downcut Bit amzn.to/45ql9bi (Amazon)
■ Tapering Jig amzn.to/3RTCgPy (Amazon)
■ Sliding Door Pins www.rockler.com/sliding-door-...
■ Drawer Slides amzn.to/3RTl7Ws (Amazon)
■ Drawer Pulls amzn.to/48QzVuQ (Amazon)
■ Amana Dado Blades amzn.to/3H1ZdKH (Amazon)
■ Rubio Monocoat Pure amzn.to/3LU4Lch (Amazon)
■ Rubio Monocoat Black Stain amzn.to/3tyirmJ (Amazon)
■ Rubio Monocoat Charcoal amzn.to/46qKjI4 (Amazon)
■ White Marker amzn.to/2UNLoVT (Amazon)
■ Incra Crosscut Sled amzn.to/2P0MCM1 (Amazon)
■ Microjig Gripper Blocks amzn.to/2EqN8kt (Amazon)
■ Microjig Gripper amzn.to/2Eh8zUT (Amazon)
■ Router Guide Bushing amzn.to/305nnP1 (Amazon)
■ Incra 1000HD Miter Gauge amzn.to/2QMpyzP (Amazon)
📷 Film Gear (Affiliate) 📷
■ Lapel Microphone amzn.to/3EkoQEa (Amazon)
■ Main Camera amzn.to/3WZBi4u (Amazon)
■ Backup Camera amzn.to/3X6cub6 (Amazon)
■ Main Lens amzn.to/3tBru3m (Amazon)
#bevelishcreations
#woodworking
#shoporganization
#officeorganization
#shopcarte - Навчання та стиль
“I know this isn’t my best illustration.” after one of the best visual models I have seen on a UA-cam video is crazy. Keep up the amazing videos dude.
Thank you
This is amazing! The doors really make the piece! Great production quality on the video, as always!
Thanks!
I love your work! This table is fantastic and how you explain things using your designs is great!
Thank you!
I love so much about this. I love the doors. I love the look of the black against the walnut. I love the base. Great piece!
Thank you so much!
I like everything about the project. The color tones are awesome.
Beautiful, but to accommodate a good A/V system there needs to be a big enough opening top-center for a center channel speaker. This console has a vertical support in the way.
I randomly stumbled across this video, really great work here! I love your method for making the slats on the table saw
Thank you!
Simple, yet retro-modern and one of the coolest looking furnitures I've ever seen!
Thanks!
Hey man! Thats a slick piece! Really loving the black on walnut look, and the motion on those sliding doors is smooth as can be. Overall, a really well rounded build with a lot of cool elements!
Thank you!
Wow absolutely beautiful love the doors and the look of the black and Walnut is stunning. Keep up the amazing work
Thank you so much!
What a gorgeous piece of work. Well thought out and well built. Stunning.
Thank you!
Awesome project, very professional production. A thought, why dont you make some custom bottom rail clips that bump together and maintain the spacing the same as between all the uprights when the doors are pushed against each other. You could hide the bump faces in the slot. Enjoyed watching this from the Shapr tutorial all the way to the final build.
More of this. Really good job. Console looks stunning.
Thanks!
Amazing build my favourite part is all of it. It’s a stunning piece love the music too very relaxing cheers for sharing it was well worth the wait
Thank you!
Stunning piece, Alex! Amazing work!!! 😃
The black doors give it another life indeed!
Stay safe there with your family! 🖖😊
Thank you so much
Beautiful console. I also love your lighthearted teaching style.
Thanks!
That built is just awesome. Creative and aesthetic.
Thanks!
Great job!!!
Awesome piece if work. Love the finished product and the colour combo is perfect. Love your work and easy instruction. 👍
Great work love your tips.
Great job man, you earned my subscription for sure. Keep up the great work.
Beautiful, beautiful piece. Probably your best work. Love the black and walnut. It works.
Thank you
How stunning!!!
Thanks :)
Fantastic build mate!
I love the way you teach. Thanks for sharing your knowledge.
Thank you for watching and motivating me to do more :)
awesome build....the finished piece looks fantastic
Thanks!
Wow, what a piece of “art”. My favorite part was also the doors. Keep designing such beautiful furniture.
Thank you!
Well done, very nice piece
Thanks!
Gorgeous design!!
Thanks!
Cool! I love the sliding door design.
Thanks!
Looks awesome!!!
Thank you
Great job, the black on walnut is really nice.
Thanks! I agree
You did a fantastic job man!👍🏻
Thank you!
Great build, really good video, thanks.
Thanks!
Amazing build !
Thank you
Professional and very clean 👌
Excellent job bro
Thanks!
I just found your channel! Your camera quality is crispy, editing is awesome, explanation of each step of the project is clear and digestible, and your work clearly speaks for itself. Obviously I've already subscribed, and now if you'll excuse me, I have your entire upload history to watch 😂
Haha thank you so much
excellent build, I subbed cause it was so cool!
Very good and beautiful work
Thank you
Good quality content as always sir
Thanks!
6:08 that's a flex hahaha, awesome work! greetings from Argentina
Thanks!
Nice work
Thanks!
Looks slick. Thinking about doing a media console myself so I might use some of your divine design features
Thank you :D
Looks great. I think the only change I would make, is doing what I did to mine, which is have a hole directly behind the chosen electrical device, so the device itself hides the hole - if that makes sense? Then you can’t see the cables. Aside from that, and perhaps using a little too much glue and noticing some breakout on the ash, it turned out great. Nice job!
The grainydays of woodworking
I really love those doors! I've been trying to niche into the media console world, and this definitely gives me some ideas! Those doors are amazing, but holy cow!! The labor would make those easily a $400 add to a project! I think I'd have to find a way to cut them on a CNC in a production environment.
Yeah they would haha. But hey, if a client would pay for it, why not 😂
Really enjoyed watching your build. Black on the doors goes great. Paul from the uk 🇬🇧
Thanks a lot!
Good job keep going 👍🏻
Thank you!
Прекрасная работа!!!
Thank you!
amazing
Thank you
I love shapr3d, I use it for my furniture and 3d printing too!
I love them too!
Very nice build. Thank you for sharing with us. My only obsession is that after edge hardwood banding I coverd with veneer in order not to have this difference. Well done.
Thanks!
Excellent build and a stunning piece! One tip...when tapering the legs, if you cut the first taper, then roll the leg clockwise, you won't need to tape any offcuts onto the leg! Just passing along a tip I got when I was doing the same as you showed in the video.
Thanks for the tip! I’ll give it a try next time!
Great build!!! Thanks for walking through it with us and introducing us to some awesome new techniques and tricks (ie Rockler sliding door hardware). I don’t have a dado stack so am trying to figure out an easy way to create those grooves for the door slats…router table?
Yeah router table could work as well!
HERMOSO SALUDOS DESDE MEXICO
Thank you
Stunning peice.
I agree the doors look great.
The only thing I'd suggest doing is to stain the inside of the shelf mounting holes as they are still pale so are noticeable.
Nice catch!
Love it!! The doors are amazing! Would you mind sharing what hold down clamps you are using for the CNC?
Hey thanks. It’s from PWNCNC
Great video and work!!!! Question: how do you avoid veneer chipping when cutting veneered plywood?? 1:59 ? Thank you!
Great job! ...you should have used Blum Movento with tip-on adapters for the drawers! You wouldn't have needed to add a handle and you could just open them with a simple push. Try them next time,.
Thanks for the tip! Yeah I should have done that instead haha
Great vid man, love your style of editing. Btw what design software are you using?
Thanks! I’m using Shapr3D. There’s a link in the descriptions and I’ve got a few tutorials
I love this, and I really appreciate the way you explain things. I might end up making this exact thing for our new living room!
One question I’ve had about workflow - is there a benefit to/necessity for waiting until you’ve assembled the sliding door before painting? My intuition says I would want paint/stain first and then glue up to avoid the tediousness of getting inside all of those little nooks and crannies. But I’m a new WW and don’t trust my gut just yet 😅
You can do either way, but both have their downside. You obviously saw the downside to gluing up first. But if we stained and finished first, then we’d need to use tape to cover up the glue surfaces first before applying stain and finish since wood glue won’t work on finished surfaces.
@@BevelishCreations See? Gut check was wrong. Thanks for the reply!
wonderful build and design..not sure but to save time would it be easier to cut the dados on the slat holders before cutting them to width? Hope it makes sense
Yeah it makes sense, it could have saved a couple of minutes
cool build. One question about cutting miters with a track saw… was there any “movie magic” there? how difficult is it to dial in a 45 degree cut? i have the TS55 and seem to always be off a bit.
It wasn’t perfectly at 45deg, but I just fix things after it’s glued up to hide the imperfections
what kind of wood if that please ?
Hey I’m following your guide and had a question about securing the miter joints for the main “box” of the entertainment center. You used dominoes and wood glue to secure it. I don’t have a domino cutter and I can’t really find a 45 degree dowel jig that’s not expensive. Would would glue alone be strong enough to secure the miter joints given I have flat cuts and clamp correctly? I only plan on having maybe 50 pounds on the stand
Yesss it’ll absolutely be enough to just use glue without dowels or dominoes. Most of the weight will be supported by the three vertical partitions anyway. Main reason why I use dominoes is to make the glue up easier for such a large piece
Hey, beautiful design. I’m not sure if I’m missing it or not but are there any dimensions for this piece? It may be helpful to include them on your website.
It’s in the plans
Nice work, what did you use for the CAM ?
Thanks! I used Fusion 360 for CAM
What was the hardware you used on top of the SawStop fence with wheels that holds down the workpiece as you were performing a cut on the table saw around minute 5:03?
Jessem Stock Guide
What kind of plywood did you use?
Really nice build, but is it worth, when so much stuff stands on top of it at the end?
Thanks! Yeah I still have a lot of stuff stored in the bottom as well
Fantastic workmanship and result, Really good information!
Tat music tho 😢
I like the music :)
What kind of tablet you're using?
I use a M2 iPad Pro
If only this could be built with hand tools
Wish Shapr3D had a similar function like Fusion 360 for Parts list. Or maybe they have it?
Not yet…
крутой дядька
Thanks!
What tablet are you using ?
12.9” iPad Pro M2
Awesome piece. Do you offer to make this media console? 😊
Hi thanks. Unfortunately, I don’t build projects to sell at the moment
❤👏👍👍
Thanks
Need to see work
From your beautiful hand ")
I would 2 1/2 cubbie space the doorz for a max cova of what will have been unused a good moment......🍟
Gorgeous piece, but I would have designed it to hold your equipment out of sight...whats the point of all the storage space if the top is going to get cluttered? The unit is so nice, it needs to be as clutter free as possible
They will be stored out of sight. It just works better this way for the thumbnail
The thumbnail is funny. You built all those shelves so your PS5 & Switch could sit on top? 🤷🤣
You ever heard of staging?
🤤
😊😊😊
Shapr 3d is good but the only problem is pricing, how does a hobbyist afford that!!???
Hobbyist is free
Thanks. But too much slow motion. Please consider speeding up some routin cutting scenes.
What slow motion? I didn’t film anything in slow motion except for the CNC part, and that’s only 2-3 clips 😂
Болтовня утомляет
Thanks for letting me know
Hai brother I like all about your woodworking but speak less
Gorgeous! My favorite part was the design of the doors too!
Is so satisfying seen your video and tons of knowledge. Kudos to @Shapr3d to sponsor people and channels like yours. Hopefully @BambuLab would send an X1 Carbon printer so you become the first using @Shapr3d for 3D printing design, because so far everyone is using Fusion 360, which still is not a native macOs app (pretty shameful for AutoDesk) Thanks again for the great content. So please @BambuLab let make Shapr3d change 3D printing modeling design the same way you guys did with 3D printer introducing the X1 Carbon. 🙏🏼
Ohhh yessss send Bambulab a message on IG for me 😂 I’d love to check out 3D printing with Shapr3D!
nice classic style
Thanks!
😊😊😊
I skipped through this video most of the time and it looked like you were talking more than actually building this thing....
I wish it was that fast 😂