One thing i dont understand is how you get the LED strips inside to the power cable; is there a slight gap in the shape to allow for the connector? i can see the cable at 3:43 but all the peices line up perfectly?
I envision something like this but big enough for a person to stand in. Then open it like a gullwing and put good sound in it. Take it to burning man and let people dance in it for one song each. Other people would be able to see in but the person inside would not be able to see out.
I came across a sphere that looked like, it had the “infinity mirror effect” inside of it! I know it was one of those resin arts! Just can’t find it again! Do you think you would try to work on a sphere within infinity effect?
how can I optimize plexi material? Do you have a drawing that I can use? I will probably buy plexi pieces that are 2x500x1000 and/or 2x400x300 Was it easy to just cut like you did? I was thinking of maybe trying laser cutting, but need an optimized drawing for that and it might melt a bit and become a hassle with the edges
I bought something like 2x2000x1000 sheet (good for two dodecahedrons) and cut it to squares 250x250 and then cutthe edges to make it pentagon shape (I printed teplate on A3 paper)
@@quadsquad3087 thank you so much for your answer, can I also ask you about the leds, i am no expert but I have seen people using a lot of cable running al the way behind the leds but you dont seem to need that. Also could you direct me to led strips that are individually programable and that can be cut at any point? I would like to have more lights than you as well I think, if possible? Its a jungle out there...thanks again...
Hey thank you for your video! Super awesome! But you ask. I want to make one and which ones do I need from the holders? Version8? Version 14 or version 16? Could you please give me some more information on this?
I wonder how a seamless sphere would look. You would have to have it thin enough, so we can make a plastic sphere. Then we need material X inside sphere can use a a small hole, and then the sphere has to be agitated constant motion while the dry time is super slow, but the sphere has to use a now moisture dry method, so an actual time, sine its a contained environment , probably heat loss method though its exterior. Then we need to light up the inside so we can see in and it reflects mired on the inside. What would it look like. Hmm.. A special mix of a reflective material inside could be energized to produce light and reflect... that may reduce the effect, but I would like to see what it would be like to see a sphere shape seamless.. hmm viewing inside into its reflective matrixes.. hmm.. Then we have if its malleable, can squash it a bit... changing the shape. I mean one could render it form a virtual environment, button reality it would look something possibly different. Which I find would be interesting, but yeah ,I really like the deca and lasohedrons, pretty cool. Since many different shapes. I thought a outside project where the light system is solar power so at night it would do soethign as that such.. hmm
yes, like I said 9A is max value, at 100% brightness and solid white color, if you set brightness to 50% and run animation (not all leds turned on at the same time) it will be around 2A
@@geroillescas6125 controller is only providing data signal, 5v is going straight to the led strip. Usually if you use cheap 5V 2A adapter and try to pull 3A from it, it can blow. If you have better one, it has over current protection and turn it self off. After reset it is working again. Try to connect only 10cm of a strip and set brightness to 10%, then connect whole strip and slowly increase brightness until over current protection trips. It is best to use lab power supply so you can see the amp draw in real time.
Love the Build! I do not have a 3d printer but I imagine I can get custom plastics cut to the right size. What are the dimensions of the pieces you use to build the dodecahedron?
Excellent guide! Thanks for sharing this. I'm rather new to 3D printing... do you have .stl files you could share? When I drop the .obj files into Cura I have to flip the object so that the flat side is down, but I still get red surfaces.
Hello, i buyed acryl sheet but i DONT KNOW how to cut the Pentagons. I cant get 15cm from each side. Did you draw the pentagon on paper and then draw the lines on the acryl or how would it be easyer? I Also printed the pentagon but my printer does to not make 15cm sides.
Im thinking about eventually making an infinity whirlpool room with a design similar-ish to this. It would probably either be a cube or a hexagonal prism with square walls. It would be filled with water with a whirlpool in the center. The only issue is I'm not sure whether the one-way mirror foil works underwater, or if it could be on the outside facing in...
my version with 60l/m (240led total) is consuming about 4Amps on full brightnes, so double that and you need 10A, of course you can run it only at 50% brightness all the time :]
This may seem like a stupid question but how do you successfully place the last piece of plexiglass into the frame? Your frame looks like it's behind the Plexi and not in front.
sorry about confusion, I changed the names now. files are in 2 types .skp and .obj, choose one you like. And in 3 versions: old (v8), newer (v14) and latest model (v16). I suggest latest model, I made iprovements to make it stronger, video about it soon. 1 model is 1 edge so you need to print 30pcs.
Why does it appear as if the Deeplight has no power source? Do you believe his is battery operated? I can tell you have yours plugged into power but in the Deeplight vid this guy is standing in the middle of Electric Forest concert.
Greetings, Divya here with NTD Television. We are one of the world's fastest growing media companies with over 100 million fans and 1 billion monthly video views across all of our social properties. Our motto is truth, hope, and humanity. We loved this video and our editors would like to showcase it by uploading it on some of our social media pages and websites so that our fans can see it. Of course, we are happy to credit your channel clearly to make sure people know how to find you and your videos. You will still hold the exclusive rights to the video. Can we have your permission to do that? Kind regards, Divya
Hi!! Okay i rewatched it for the twentieth time lol. So what type of glue are you using to put on the led strips, mirror foil, and glueing the plastic sheets
@@quadsquad3087 Is it possible to make it a bit bigger? Like 25cm per side? Would it make it easier to build? Is it difficult to change the object dimensions?
This is how how to videos should be done. modest, simple and straightforward.
The lights at the end makes it looks like a futuristic Disco!
this is a dmt artifact
That dude that used the foil knew exactly what he was doing! Am I right? Hehehe
Wiring:
sections in series: 1,2,3,4,5 and a junction between 3 and 4 having 1 segment attached, so the 6th element is wired in parallel to the 4th.
This is amazing and thank you so much for sharing the construction process!
kamaráde, neříkej mi, že nejsi z Čech!! :D tohle video jsem hledal x mesicu, dekuji moc!!!
jasny, mam cz kanal quad squad cz :)
the intel i9 9900k cpu case looks just like this
illestmuzik lol
You right
'
wow very beautifully color LED in the pentagon mirror
Well... this must be some weird 5 dimensional SCP thing
Thats one fancy engram!
Amazing, Thank you 4 sharing this.
2:04 whats the name of the song ?! 🧐🤩⭐️⭐️⭐️⭐️⭐️
blanked odonis odonis
dont know if you find it yet :D
This is illegal make people fool. Great JOB. Thumb's up. Taky si myslim ze je z Cech ,D
Projects like this really calls for mirrored glass, even the slight warping of the hard plastic ruins the full infinite effect
yes but the heat of the leds can melt youre termichal glue and the plexy to.
That looks amazing, I love it, you clever bloke
How did you connect the led strips i couldn't see that part.
Check at 2:49
So fucking cool. You’re a pro man. Should sell these if deff buy one
my boy is exploring hyperbolic geometry, he just doesnt know yet
Awesome vid Thankyou I’m going to try
One thing i dont understand is how you get the LED strips inside to the power cable; is there a slight gap in the shape to allow for the connector? i can see the cable at 3:43 but all the peices line up perfectly?
there is a small hole in one segment, watch other 2 videos I made about dodecahedron on this channel
Simply cool. Many thanks.
I envision something like this but big enough for a person to stand in. Then open it like a gullwing and put good sound in it. Take it to burning man and let people dance in it for one song each. Other people would be able to see in but the person inside would not be able to see out.
Dude I need that music.
Blanked - Odonis Odonis :)
Haven’t watched the entire thing but I’m sure this will be helpful thanks :)
I came across a sphere that looked like, it had the “infinity mirror effect” inside of it! I know it was one of those resin arts! Just can’t find it again! Do you think you would try to work on a sphere within infinity effect?
Banging beat, good Job.
Thats dope AF. Great job...
How did you get the spectrum analyser effect on the matrix panel??
separate controller sp106 and sp107
how can I optimize plexi material? Do you have a drawing that I can use? I will probably buy plexi pieces that are 2x500x1000 and/or 2x400x300
Was it easy to just cut like you did? I was thinking of maybe trying laser cutting, but need an optimized drawing for that and it might melt a bit and become a hassle with the edges
I bought something like 2x2000x1000 sheet (good for two dodecahedrons) and cut it to squares 250x250 and then cutthe edges to make it pentagon shape (I printed teplate on A3 paper)
@@quadsquad3087 thank you so much for your answer, can I also ask you about the leds, i am no expert but I have seen people using a lot of cable running al the way behind the leds but you dont seem to need that. Also could you direct me to led strips that are individually programable and that can be cut at any point? I would like to have more lights than you as well I think, if possible? Its a jungle out there...thanks again...
5v or 12v and why? and how do I know every light is adressable and can be cut? also what does the 5050 stand for?
and also how do I know that they are the thin ones? thank you for taking your time
oh and how many meters do I need?
Oh my God ...thats amazing ...could you plz make a tesseract
What’s the name of tune you played?
Looks like a engram from destiny
My mind screams: Engram of Infinite Possibilities when looking at this
that is even cooler than the post I saw on the D2 reddit
how do you connect the light strips to one another when youre assembling it on the glass?
Hey do you know what causes the distortion in the reflections and how to avoid that?
this was only quick prototype, not final version, just ducktaped together, not all angles were same, take a look at new video if you will see them too
What is the thickness of the glass? Plz im korean
2mm
and which (plexi)glass did you use (link please)?
at least the specs Thx
they don't sey eshop.holoubekprotect.cz/DESKA-PLEXI-cira-d1697.htm
How do you control the LEDs to get that sparkling effect at the beginning of the video?
it is not my video, you can search the title on youtube, they used custom program probably
That's an Engram if I ever saw one!!!
This looks so awesome! Great job
Would this method work if I modified the shape to an icosahedron instead??
yes www.hackster.io/news/how-to-build-an-led-lit-infinity-mirror-icosahedron-918eeb0f4852
Cool video but who is the artist and name of that track? Awesome song...
I would like to know too
Odonis Odonis - Blanked
ua-cam.com/video/wI_sxsd5Ov4/v-deo.html
This is absolutely sickkkk 😍
Right!
Hey thank you for your video! Super awesome!
But you ask. I want to make one and which ones do I need from the holders? Version8? Version 14 or version 16?
Could you please give me some more information on this?
print only the v16, latest and greatest :)
And how much must i print?
60 is that enough?
@@richardg9546 30 is the exact number
i want to try this, but i want to use EL wire
OR possibly fiber optics with color changing leds
Can you take away the tape?
Hello, who can tell me if the mirror film goes inside or outside the project?
Thanks.
inside i think, im 10 so correct me if im wrong
I wonder how a seamless sphere would look. You would have to have it thin enough, so we can make a plastic sphere. Then we need material X inside sphere can use a a small hole, and then the sphere has to be agitated constant motion while the dry time is super slow, but the sphere has to use a now moisture dry method, so an actual time, sine its a contained environment , probably heat loss method though its exterior. Then we need to light up the inside so we can see in and it reflects mired on the inside. What would it look like. Hmm.. A special mix of a reflective material inside could be energized to produce light and reflect... that may reduce the effect, but I would like to see what it would be like to see a sphere shape seamless.. hmm viewing inside into its reflective matrixes.. hmm.. Then we have if its malleable, can squash it a bit... changing the shape. I mean one could render it form a virtual environment, button reality it would look something possibly different. Which I find would be interesting, but yeah ,I really like the deca and lasohedrons, pretty cool. Since many different shapes. I thought a outside project where the light system is solar power so at night it would do soethign as that such.. hmm
Hello, is 9A and 5V the input for the SP107E?
yes, like I said 9A is max value, at 100% brightness and solid white color, if you set brightness to 50% and run animation (not all leds turned on at the same time) it will be around 2A
@@quadsquad3087 i connected 5V and 2A and i think that i burned the controller 🥴. Thanks for the answer. I'm going to try again :)
@@geroillescas6125 controller is only providing data signal, 5v is going straight to the led strip. Usually if you use cheap 5V 2A adapter and try to pull 3A from it, it can blow. If you have better one, it has over current protection and turn it self off. After reset it is working again. Try to connect only 10cm of a strip and set brightness to 10%, then connect whole strip and slowly increase brightness until over current protection trips. It is best to use lab power supply so you can see the amp draw in real time.
Hey, could you tell me if this sculpture is available to buy?
not from me, but take a look at the link in description
Love the Build! I do not have a 3d printer but I imagine I can get custom plastics cut to the right size. What are the dimensions of the pieces you use to build the dodecahedron?
15cm lenght of each edge
do u take the tape off?
watch part 2/2
@@quadsquad3087 in the end? when you were showing off the lights, i noticed that the tape was still holding the pieces together
@@carlydelsack4101 ok, last video has no tape :) ua-cam.com/video/yZ_3WRuUla0/v-deo.html
OMG!! Thank you so much!
Excellent guide! Thanks for sharing this. I'm rather new to 3D printing... do you have .stl files you could share? When I drop the .obj files into Cura I have to flip the object so that the flat side is down, but I still get red surfaces.
Thanks, I made it in sketch-up so no stl, maybe it can export it like that, you can try it, I am using prusaslicer
Hello,
i buyed acryl sheet but i DONT KNOW how to cut the Pentagons. I cant get 15cm from each side. Did you draw the pentagon on paper and then draw the lines on the acryl or how would it be easyer? I Also printed the pentagon but my printer does to not make 15cm sides.
I had to print it on A3 paper, or two A4 and glue it together
what wire are you using to solder the strips together?
also what power supply are you using, i want mine to be sized appropriately for 8.33 ft. of LED strip at 5.5 Watts per ft.
Im thinking about eventually making an infinity whirlpool room with a design similar-ish to this. It would probably either be a cube or a hexagonal prism with square walls. It would be filled with water with a whirlpool in the center. The only issue is I'm not sure whether the one-way mirror foil works underwater, or if it could be on the outside facing in...
Amazing stuff! What library/code did you use for animating that matrix with music? it looks fantastic
it was using SP107E controler, you can set it for matrix or strip, my test video here
ua-cam.com/video/eD5r-VsQCOQ/v-deo.html
Can I ask how large your pentagons are? Just like one edge length.
15cm edge
How do you connect the led strips?
I think you should take off the film thats facing the outside of the plexi glass so you can see it more clearly
of course, take a look at final video :]
Can you send me a link for the lights you used
just look for WS2812B strip
Hey there, did you put the 1way mirror foil on both sides of the panels?
no only from outside
Quad Squad thanks ✌🏼
Make a rhombic dodecahedral one
The people that disliked this are the ones selling for $5000
What battery are you using to power the 144/m vs 60/m LEDs?
my version with 60l/m (240led total) is consuming about 4Amps on full brightnes, so double that and you need 10A, of course you can run it only at 50% brightness all the time :]
This may seem like a stupid question but how do you successfully place the last piece of plexiglass into the frame? Your frame looks like it's behind the Plexi and not in front.
The frame is a litle bit flexible so I pushed it in. More material is behind the plexi but there also little bit in front :]
@@quadsquad3087 Thanks for the reply.
Looks sick! 👍🏽
This is sick bruhhh
Music please? 🙏
what is the thickness of your pentagons?
if you mean the plexiglass it is 2mm
is is possible to get the dimensions on this?
Nice job
I seen the 3d files, how many of each do you print?
Can I Dm you? Looking to build, but not sure on some parts
sorry about confusion, I changed the names now. files are in 2 types .skp and .obj, choose one you like. And in 3 versions: old (v8), newer (v14) and latest model (v16). I suggest latest model, I made iprovements to make it stronger, video about it soon. 1 model is 1 edge so you need to print 30pcs.
@@quadsquad3087
Thanks, that makes sense
Why does it appear as if the Deeplight has no power source? Do you believe his is battery operated? I can tell you have yours plugged into power but in the Deeplight vid this guy is standing in the middle of Electric Forest concert.
yes you can use battery, for example 12,6v li-pol 3s pack and then use step-down to 5v (10A)
this might be late but hot glue instead of tape would look great
The one way mirror tint you’re using looks different to mine -.-
Can I buy one of you
sorry I only have one, now making second, so then maybe :)
the scheme link goes to a 404, would you mind providing a new link please?
fixed, link is drive.google.com/file/d/17CiI9-YV0Id03ScudgktHuNx7LMxKMHQ/view?usp=sharing
Nice
What if the dodecahedron was big enough to sit inside? Must be trippin! ;p
nice, maybe I will put a rotating mirror disco-ball inside
@@quadsquad3087 i should suggest a cube in place of a ball. But you can apply both with a universal connector and switch overtime when you feel like!
😂🤣😂🤣😂
@@genesioUSA This guy made a 6ft one.
ua-cam.com/video/WDK5xYHuQf0/v-deo.html
who put destiny's engram irl on his desk
Its a 4D dodecahedron
hmm a very strong Indian accent
bro I was in india for 1 week :) also 6 months in canada and so on, I am from czech republic :)
Woah, $5,000 for a light up dodecahedron?! ☹️
Would you sell me one
❤
Somebody needs to encrypt this engram
🌟🌟🌟
😮😮😮😮
Use clear tape and length way lol
Make me one let me buy it
Greetings,
Divya here with NTD Television. We are one of the world's fastest growing media companies with over 100 million fans and 1 billion monthly video views across all of our social properties. Our motto is truth, hope, and humanity.
We loved this video and our editors would like to showcase it by uploading it on some of our social media pages and websites so that our fans can see it. Of course, we are happy to credit your channel clearly to make sure people know how to find you and your videos. You will still hold the exclusive rights to the video.
Can we have your permission to do that?
Kind regards,
Divya
Hi!! Okay i rewatched it for the twentieth time lol. So what type of glue are you using to put on the led strips, mirror foil, and glueing the plastic sheets
led strips - ca superglue, mirror foil has its own and plastic frame superglue and some hotglue for rigidity
what size hexagon are you using?
15cm side, 2mm thick
@@quadsquad3087 Is it possible to make it a bit bigger? Like 25cm per side? Would it make it easier to build? Is it difficult to change the object dimensions?
@@meneerbrabo not at all, just print it at 200% and you have 300mm side, and use 4mm thick plexi glass (original 150mm side and 2mm plexi)
Show
Not ce but not time for all that. eBay lol
Infinity dodowhat
im lost
Česká english