Це відео не доступне.
Перепрошуємо.
The Max Michel Sig P320 USPSA Competition Spring Kit
Вставка
- Опубліковано 1 сер 2021
- One of the easiest ways to change the "character" of your handgun is with a spring kit.
It's also one of the cheapest!
And just in case you didn't know it, Lenny Jr. is a HUGE Sig fan in general and the P320X5-Legion in particular. He runs THIS kit in THAT gun every time he competes!
This is our SKU: S1010 and you can find it here: www.glockstore...
I wish you could have included a video of what the trigger pull is like once the springs have been installed
yea i know makes me on the fence on buying it
Kudos for a very professional video,more detailed than some Sig channels
I have the new M17 version with the Sig.factory suppressor ready slide. I like it a lot. Thanks for the video on this.
Lenny what professional job you done with the spring kit. Thanks for the video.
This is a great upgrade. Now I need another for my spectre comp. Thanks
Lenny what a great video. The best instruction and explaination I have seen!
For anyone curious, I was getting about a 3.5# trigger before I installed these springs. I'm now getting about a 2.5# trigger pull with no overtravel. I have the 320Max. It was a little bit of a pain to install the kit, until I looked at the fcu for a few minutes. Now I could install this spring kit in about 10 minutes.
The gun works perfectly with the lighter springs; I got about a 10% reduction in trigger weight. The only thing different is when i put the buffer on. Then the trigger locks.
I just purchased this for my p320c that I had to get the voluntary upgrade with that said I have the Sig flat trigger and the smaller trigger stop bushing is still to much and unless you run only 1 sear spring like he mentioned it doesn't change alot it wasn't just a plug and play event but with some fine tuning I have a nice 4lb pull
I get to the sear spring, my hatch will not open far enough to get the springs out?
Do a video titled 'Why you need to update your awful computer system to show if things are in stock or not instead of taking customer's money first THEN telling them afterwards.'
trigger pull weight before and after would be great and a close up of the reset
I ordered a trigger. It said it wouldn’t bill me till my order shipped. It took my money right away. Then I call 12 days after I placed my order because I didn’t get a response to my 3 emails. Then they tell my is on back order. At this point will never buy from here again. They didn’t even seem to care.
I love my sig x5 legion. Definitely want that mag well.
Lenny, good product...but. The lighter springs - sear and trigger - yield about a 10% reduction in trigger pull weight. The overtravel buffer is another thing. I tried it with my Apex flat faced trigger and with the stock Sig trigger. After I rack the slide, the trigger locks up.
Seen a lot of advertising for Sig products on a Glock channel…🤔…even Glock is putting RESPECK on Sigs name…yes RESPECK
Thank you Lenny! :)
Any chance for increased weight spring kits for people that prefer a heavier trigger for EDC? Is pretty common for people to use the heavier trigger springs/connectors with Glocks, so I think it would be common for the P365 if the heavier springs were available.
Best gun in the world , ever made , ever , in the world …. Forever ….. the best 😬
Hi dear!, Do you know if there is an improvement when changing the factory spring for DPM system recoil ???
Good luck trying to get ahold of anyone if you want to ask the status of your order that supposedly was already shipped. They just will not answer the phone
Any color coating, so they don't get mixed up with the factory springs?
I follow the procedure per your video. Once I have the .135 buffer installed, I check for functionality. The trigger works. I then re-install the FCU and the slide lock. While the slide lock is pointed down, I install the slide and lock the slide back. Then I turn the slide lock up and release the slide. The trigger is dead! What did I miss?
I love that tungsten
Hey, I have a question what guide rod will work. In the p320 axg legend
for a lefty how do we deal with a gas pedal?
That would be an engineering feat in its own right. I wonder if you can get one that goes on the rail. Would interfere with any light or laser (moving them down assuming that the gas pedal has its own rail, so a light/laser can be installed onto it). Have no clue how a holster could be found that would work with it though. Could probably contact a custom holster company and have one made for a fair price.
Looked up left hand gas pedal and they do make one that goes on the rail. It don't have it own rail though, so you can't install a light or laser on it. They want $40 for it too. Could probably come up with a much better design/option though if you tried (like a takedown lever version). I know it's not quite as simple as it sounds, because the takedown lever can only be installed from the left side and it cannot be modified to install from the right side... but I still think it could be done. (sorry for the rant).
Great video!!
Any idea on the lbs weight? did it switch to 2lbs? So glad for this, looking for a spring to help get an easier slide to work as well lighter trigger. Can’t stand 4lbs of pressure 👏👏
I just bought this and I'm using the .135" trigger over travel buffer and I noticed the following when dry firing. When I pull the trigger and hold it back, rack the slide, and release the trigger and pull it again, it does not reset the firing pin. Is this normal? If I rack the slide with my finger off the trigger, then everything resets just fine and works like normal.
I love my Glock 20 and 43x, but my P226 Elite is by far the most consistent (reliable & accurate).
I would not make an argument in regards to Glock vs Sig cost/value because Sigs tend to be overpriced.
I agree, glocks are great but they really have let themselves down. You can't change the muzzle shape, call it a new generation, and expect people to keep buying. Sig is create new and innovative products, and honestly they feel way better in the hand.
I have a P320 X-VTAC with the Custom Works FCU. Would these upgrades benefit me?
Been patiently waiting for a response for GS, anyone who might know or maybe Max Michel himself! But no dice. So I am going to buy it and try it in every P320 I have and report back. I am Sig Armorer, so maybe others will value the information I find.
I'd rather have the Glock 34 Gen 4 Custom Production Class Race Gun with the pyramid cuts but a VERY slightly different design and YES, I want the finger grooves but without the extended mag or slide release. A G34 Gen 4 Dragonfly would be NICE!! VERY NICE!!
Watch the videos from the Sig Guy. His way is so much easier. At least on the trigger bar spring.
Lenny McGill’s SigStore
went ahead got it had to go to another for install directions these are incorrect , just get a apex trigger bar and trigger after installing this no differance
Does the p320max come pre-upgraded with the spring kit?
I followed video, got springs installed. About 9-10% trigger pull reduction. Added smallest roller on trigger stop pin. All parts work until re-install FCU into gun. Trigger will NOT pull. Any suggestions?
You’re suppose the install the slide and lock it back. If you don’t lock it back first, you’ll have a dead trigger
what are the chances of light strikes with this kit?
Will this work with the apex trigger bar ??
The best sigs were 220 and 226 if I go polymer I stick with glock
EXACTLY!!! NO other way to put it... The ONLY sig I would have is the 226. EVEN THOUGH I like the 10mm. (220)
Cool story
👍👍👍
nice
Sounds like California drink..Tungsten infused lol
👍🏻👍🏻🇺🇸🇺🇸🍺
Modelos do Tiago Jaques Sabino Araruama Rio tem potencial 🇧🇷🧐🕴️☸️🗜️✔️
O Tiago tem material igual aqui no Brasil?
SMS FURTy 🧐📱💡!?!?!!??
Time to make videos but no time to answer your phone lines
Waste of money