Car Link install to Start X remote starter on 2021 RAV4 HD 1080p
Вставка
- Опубліковано 1 сер 2024
- This install is for the Car Link cellular module. Allows remote starting of the vehicle anywhere there is cell service! No more short range!
This fits many different remote starters, here is a link to the website:
www.voxxelectronics.com/searc... - Авто та транспорт
just install mine and now it work fine after watching u video on how to program it
Thank you 😊 same works for my 2014 Lexus GX 460.
Glad to have helped!!!
Nice review. I'm doing this on a f250 and using Alexa rutines in my cell phone so when I set up alarm in the morning if is too cold a can commands my cell to start the truck
Thank you so much, this video helped me out 💯
Glad it helped!!!
Question: After installing this on your RAV4 does the heater/ac automatically turn on based on your prior settings?
@@Vincentgonzalez1993 It’s the same as you getting into car and starting it, so any settings your vehicle would normally keep this will be the same.
Nice job brother
Thank you!
I'm installing the carlink module onto my Startx key unit 2020 Honda HRV. How did you determine which harness adapter to use and which port on the Start x to use. My Carlink gives no instructions on this. Unless it does it on the app. I was just reviewing things before starting the carlink install. Start X is installed and working fine. Any help would be great
and i just notice that when u lock and unlock the door with this app the light dont flash like when u use the key remote to unlock and lock your car
Can I just unplug the car link in the reverse order you installed? Seems like a dumb question but I wasn't the one who installed it. Having a problem with the door unlock/lock fuse blowing once a week and trying to trouble shoot.
I don’t see why not but I can’t say for sure as mine is still installed. Sorry I couldn’t be of more help.
So will this configuration work the door locks and lift gate etc? if not how do i do that
The door lock absolutely. I don’t have a power lift gate so not sure, sorry.
Is reprogramming the start x a must when installing the car link?
Just saw this, sorry for the late reply. No, it was actually very easy to add the car link!
Thank you very much for your video. I have few questions. I have a start x remote starter i programmed to work normally but not far enough. If I add this car link on do I have to program exactly like you or I have to go fortin flashlink app to program it too before or after program that unit. Please advise. Thanks
you can still start from the car fob as well?
Yes, the fob still works to start the car 👍
Hello, Do I follow these same instructions if mine is keyed? Exept Ill just be turning the key to the on position?
I’m sorry I don’t have an answer to your question. Maybe someone else will know and respond.
@@DoItTogether2022 I downloaded the instructions from google which were exactly as u pointed out in video but it doesn’t specify pts or keyed. Instructions only state to put in “on” position so im assuming it doesnt matter🤔
@@Hector-cn3rv I didn’t know they actually made one for the keyed ignition.
@@DoItTogether2022 Well I have a 2021 Rav4 push to start and a 2019 Camry SE key to start. Both vehicles have the StartX remote starts installed. I definitely will be purchasing this Mycar cell phone module for the Rav and follow your instructions on this video. Im just curious if this same programing method is used for the Camry as well. How did you get the programming instructions for your Rav in the box or on the app after you input vehicle info?
@@Hector-cn3rv I did this video because the instructions were kind of all over lol, but I believe it was mostly in the box.
what did u use for remote starter configuration protocol did u use fortin
if I remember correctly it was Fortin, but it’s been a little while since I’ve done the install.
Hello, I installed the evo-all with the carlink module, but my battery died and i tried pairing the carlink with the evo-all but nothing seems to happen. I'm able to remote start my car with the key fob , but the the module and app are not working. Do you know how to fix this ?
I would check and make sure the unit is getting power. It was working prior with no issues? What vehicle? You may need to contact car link directly. They are quite helpful!
The instructions are pretty horrible. How do we know which included harness is right for our vehicle? I have a 2018 Toyota Sienna. There is no information on which is the proper protocol for vehicles either. I selected ADS. I can get the App to start the vehicle but the app buttons don't turn green to show activation, they turn red and the app shows the vehicle is not started even though it is. I'm at a loss here.
Any advice would help
Sorry for the really late reply, I never received notice of this comment.
Is your vehicle the push to start?
@DoItTogether2022 no worries.
I was able to call customer service and they walked me through the steps. At first they weren't very helpful but eventually we got it figured out.
@@benlavigueur4275 Im having the same issue at the moment what ending up being the solution?
@jorgillo707 I had the correct protocol but customer service had me do a different installation process. Call them
I tried installing it when I received it and failed due to not having any instructions. Now I barely had the time to reprogram everything and the carlink leds do not turn on any help? My start x remote start works I just don’t get anything from the car link
What are you installing this into?
@@DoItTogether2022 2018 Chevy Cruze
@@albertonunez7681 Have you downloaded the instructions? I can email you a copy if needed?
@@DoItTogether2022 yeah I have the instructions thank you. When I first tried to install the car link I would get a red and green led and now I have no leds turning on
@@albertonunez7681 Sorry I can’t be of more help, maybe contact them directly?
I am struggling and frustrated as shit what programs do I pick to flash it?????????
What do you mean to flash it? What exactly are the issues you’re having?
@@DoItTogether2022my module is not flashing idk why
Weirdly enough, this exact setup works for my 23 4runner, startx starter and carlink 6. The only thing that's off is that it refuses to unlock from the app. It knows and shows when I unlock via the fob or door handle, but when I try to do it from the app, I hear the startx click twice but the car never does anything. Then the app shows its unlocked when it's not
That is odd. All functions work on my RAV4. Have you contacted start x and car link?
Thanks for the comment. I'm looking at this for my 21 4Runner. My StartX is installed behind the glove box so I wasn't sure it was the same.
@MarkKlanac yeah I just did the startx and carlink all at once last night in about 2.5hrs. I tried following the carlink install manual and it absolutely did not work, but this guy here's way worked perfect besides the unlock thing. Finding a spot to leave the carlink is wonky though, let me know if you find a solid spot for it
@DoItTogether2022 I wrote an email last night but they probably won't respond until Monday so we'll see 👍
@@masonoliver8818 is yours behind the glove box?