That man said he got the perfect edges. Nah Leanne stop playing appreciate the vid. I’m doing this on my k24 valve cover run but I’m going with spoon yellow
I used plastic wrap and spraying two different colors at once to get a marble effect it came out amazing. Cream gold Marble. also just to be safe I used acetone or alcohol to neutralize first, then rinsed with water and let it evaporate in the sun just to be extra careful. When you first started spraying, it looked like it was really windy. I suggest taking a big cardboard box and making a disposable paint booth.
I know this isn’t that related to the video, but I want to paint my rims black but right now they have a chrome finish, does that paint remover stuff work on that? Any tips would be appreciated
+Francisco Silva get a drill an a paint remover bit. That would work for sure. It just takes time. Get the black sponge looking bit so it doesn't scratch the rims up
hey men I'm planning to swap a b20 into my 99 civic what I would need to complete the swap I already have a b20b.type r transmission. em1 post Mount em1 t bracket
I'm painting mine today how long did you let the paint cure before you put the tape on it the start cleaning off the letters?. I'm not using wrinkle pain I'm using standard paint
79th Productions oh ok thank you so much I really want to learn how to fix dents and know what type of grit parper to sand with ,on my car because I want to prepare it for painting
Great tips with sanding the masking tape and tape around the lettering to avoid any mistake when tidying up the lettering. ✊
Made the engine bay a big difference! Looks good.
+BurrNinja thank you
Love your videos bro, DIY, fun, and cheap! Cheaper projects are the best
+Shreda125 Hilux thank you
Nice color. Really grabs your attention when you pop that hood. Great skills man. Keep up the videos and hard work. 👍
Bro great job God has blessed🙏you with a gift..............
+Rafael Santos thank you
Hate the red unless it’s actually VTEC. There’s so many options, have fun with it.
That man said he got the perfect edges. Nah Leanne stop playing appreciate the vid. I’m doing this on my k24 valve cover run but I’m going with spoon yellow
I love your vids man 👍 planning on doing this but black on my gsr valve cover.
+dc2gsr greg thanks and good luck
Damn man I love that you are out there on your own just doing it. Your contents great keep up the awesome videos.
You did a good job painting it im nkt a fan of colors other then black on LS and b20 valve covers but the paint job is legit none the less
Love your videos bro, can’t wait to do this to my evo in purple 🔥🔥
really enjoying your video
Thanks for the DIY bro!
I like your videos bro, make me wanna paint my valve cover wrinkle red on my bb6 prelude!
I used plastic wrap and spraying two different colors at once to get a marble effect it came out amazing.
Cream gold Marble.
also just to be safe I used acetone or alcohol to neutralize first, then rinsed with water and let it evaporate in the sun just to be extra careful.
When you first started spraying, it looked like it was really windy. I suggest taking a big cardboard box and making a disposable paint booth.
Looks good man :) always enjoying your videos 👍🏼
+Omar Vega thank you
Car is coming out great did you ever get your engine problem straighten out
+ken smith yes i will update soon
Olmost perfect!! And this is your first time
nice tips on this video.., but what if i dont have a heat gun...? can i use hair blower instead...? 😅
Finna do this rn gang
looks clean!
if you put carmex on the letters before you paint it's an even easier process than have to sand afterwards.
As always.. awesome video keep up the good wrk
+John San Miguel thanks
I know this isn’t that related to the video, but I want to paint my rims black but right now they have a chrome finish, does that paint remover stuff work on that? Any tips would be appreciated
+Francisco Silva im not sure i never tried it
+Francisco Silva get a drill an a paint remover bit. That would work for sure. It just takes time. Get the black sponge looking bit so it doesn't scratch the rims up
79th Productions thank you man!!
Advance auto parts carry’s VHT
I'm probably overthinking it, but don't you need to sand off some of the paint for that ground on the bottom right corner?
Yes, your correct. Just take a pencil and cover the eraser with some sandpaper and your golden.
is it necessary to put primer before spraying the red paint?
Great job!
+tubejim101 thank you
Would a hair dryer be sufficient to get the wrinkles?
Thanks for the vid!
Leaving outside in the sunlight will get you wrinkles as well, you just have to wait longer for the wrinkles to come up
hey men I'm planning to swap a b20 into my 99 civic what I would need to complete the swap I already have a b20b.type r transmission. em1 post Mount em1 t bracket
is the primer necessary if the cover is oem not previous paint?
I'm painting mine today how long did you let the paint cure before you put the tape on it the start cleaning off the letters?. I'm not using wrinkle pain I'm using standard paint
A couple of hours
Love ur content would love more uploads
Nice bro
its beautiful
+Antonio Mayen thank you
Did you have to drain the oil out the engine before removing the cover?
no
got to do this...God bless homie
+Retired Tony 1970 thank you and God bless you
Did you apply silicone before putting on the valve cover?
Yes
Do have a video where you show how to bondo and fix dents ?
I don't. I will make one soon
79th Productions oh ok thank you so much I really want to learn how to fix dents and know what type of grit parper to sand with ,on my car because I want to prepare it for painting
Keep up good vids 👍🏽
+enrique castillo thanks
💯🔥💯🔥💯🔥
It looked better even as the aluminum color after you cleaned it..
Can i ask if vht wrinkle plus was petrol resistant?
It's pretty tough, stronger then any other valve cover paint.
What about primer ? And the bare metal showing through the metal?
Can i use hair blower to wringkle
Idk. If it's hot outside put it directly under the sun, it will work
PPE! Too many people don't use it.
Noice!!!😲
Ya not prime ??
10:57. These little nuts. Lmao
B18b gang
to get a perfect wrinkle toss it in your oven, it doesn't smell great though haha.
Jim D I used Stone texture over Chrome and then painted it satin black.
It made my trim look like cast iron. 🍳🍳
Idk why people like this, it just makes it looks like plastic to me but ig its appeasing to some
becaue the S2000, type r and ferrari use it. its a cool look
U didn’t rtv the edges of valve cover gasket ..u a newb
Italians painted valve covers wrinkle red before japan figured out how to build a car.
that cover looks factory