I got a Pat's Easy Change Quick Hitch System - MCG Video
Вставка
- Опубліковано 8 лип 2024
- After many years of receiving comments encouraging me to try the Pat's Quick Hitch system from @PatsQuickHitches I'm finally trying one out on my @Kubotatractorcorp Kubota B2601 compact tractor. I'll take you through the installation, first use, and first impression.
Check out www.patsquickhitches.com for more info or to purchase. You can also purchase here via affiliate link at amzn.to/3Uaow2v
PTO Extension affiliate link: amzn.to/3WdGyUa
Be sure to use the following discount codes and save money!
Saw Haul sawhaul.com save 5% with code MCG
Ken’s Bolt On Hooks boltonhooks.com save %5 with code MCG
Hisea Boots hisea.com save 15% with code MCG
Join Soundstripe to use high-quality royalty-free music in your videos: soundstripe.com/start/?fpr=mcg
Save 10% with code: MCG
Here are some product suggestions. These are Amazon Affiliate links, so purchasing will help this channel by providing a small commission while not costing you any more. Thank you for your support!
AirTec Lube-Shuttle Pistol Grip Grease Gun Kit:
amzn.to/3O0pj1z
LockNLube Grease Gun Coupler:
amzn.to/3kPcvwu
Recommended Grease:
Valvoline Moly Fortified
amzn.to/3jNM1Kv
Nitrile Gloves:
amzn.to/34Kg8OG
Deerskin Gloves:
amzn.to/2I17NNy
My Video Gear:
DJI Osmo Action 3:
amzn.to/3JqbZno
DJI Mic
amzn.to/3J4vAIv
DJI Air 2S
amzn.to/3Yxid9n
Rode Wireless Go II microphone:
amzn.to/3eiJatG
Canon M50 Camera (now Mark II):
amzn.to/3vHW9uD
Battery adapter for M50:
amzn.to/2RshsBE
Sigma 16mm prime lens:
amzn.to/3vJDRcx
Sigma 30mm prime lens:
amzn.to/3epFneh
Variable ND filters:
amzn.to/3tmoHIs
This may apply to the B2301, B2401, LX2610, LX series, BX series, L series, MX series, M series, and even many other Kubota, John Deere, Mahindra, or other brands of tractors. Featuring homesteading, gentleman farming, rural living, DIY projects, and more!
This video is intended for entertainment purposes only.
#MCGtube #MCGTV
Learn more at www.patsquickhitches.com
PTO Extension affiliate link: amzn.to/3WdGyUa
Another plus to Pat's vs a quick hitch is that you don't have the "frame" of the quick hitch in your way when trying to hook up the PTO. Creates a lot more space to wrestle with the PTO shaft.
I have modified my implements to make them all quick hitch compatible. While I can see Pat's is useful for some people, a quick hitch with compatible implements is simplier.
I've been using these for about five years , they saved me hour of back pain and frustration. They work even better with extendable lower arms.
I’ve fought with attachments long enough! 🤣
I have had Pats for 5 years now. Never a issue. I do see now he has added a spring to it. You will enjoy it
Thanks!
I've done the quickhitch dance, included the HF one. Got Pat's Easy Change and never looked back.
Good to hear!
I had the Pat's for a few years. I found that when using them, I was jumping on and off the tractor just as much as I was without them. I Sold them and went to a quick hitch, which I like much better. Also know that If do go with either Pat's or a QH, you will need to buy a PTO extension if you're running anything like a mower or tiller.
Thanks for sharing!
I have the Pat's Quick hitch and must say that it is far superior to not having one. I went with Pat's since I have multiple implements that are not quick hitch compatible. One added advantage I've found is that I have more room to get in there to hook up the PTO shaft when necessary. I used a permanent marker on the adjustable spacer rod to help speed up setting the proper width for each particular implement. I take it off and leave it at the tractor shed. Have fun using it.
Awesome!
My rotary cutter is my only quick hitch compatible attachment. I don’t have any “quick hitch” system myself. Mounting attachments can be a pain, but you do get better at it with practice. My tractor has a leveling box for easily adjusting the height of the right 3-point arm. Thats a feature I don’t see on tractors today. In fact, watching you struggle to reconnect your rotary cutter when your 3 point arm came off the tractor inspired my most recent video on the usefulness of a 3-point leveling box as opposed to the threaded rod style leveling adjustment.
Good choice. I’ve had Pat’s for three years now. No issues what so ever.
RCAFpolarexpress
OUTSTANDING INFORMATIVE VIDEO Sir Ed 😇👍👌Cheers 🍻
I love my pats especially after I got the stabilizer bars from messes those turnbuckles were a pain in the behind! I have several attachments that are not quick hitch compatible and for me it made the hooking up so much easier!
Nice!
Have had Pats system a couple years are so love it, no problems.
Pats are good stuff.
Thanks Hank!
I've used a Pats system for 2.5 years. Great product! Never had an issue with it.
Great to hear!
After bending the spreader bar I learned the hard way to remove it after hitching
Bummer!
I have the Pats hitch on my cat 2 tractor with a hydraulic top link. Everything fits easily!!!!
Nice!
Great intro to Pats product Ed! 👍👍
Thank you!
How's she goin'? The Pat's Quick Hitch is a nice helper for hooking up. To me the biggest plus for this system is it will adapt to just about any attachment. The down side is like you mentioned, a little more fiddling to hook up. I guess each system is good, but not ideal!! Thanks for this review. You showed some pretty interesting aspects of the Pats Quick Hitch system!! Take 'er easy!!
Thanks, Mike! Yeah, there is no perfect system!
Hey Ed, here is a tip for you: Get a couple of those long garage “twist ties” and run through the latch and around your3 point arms.
This prevents the latch from bouncing open….and they will! Don’t ask me how I know!😮
Good tip! 🤣
Nice job, Ed! All the comments that are extolling the quick hitch over the Pat’s system are missing the point. If you have implements that can’t use the quick hitch, Pat’s is a terrific improvement.
Thanks Larry. 100%!
With the adjustable links on the 2601 you don’t really need the stabilizer bar you can just set your pins, i threw mine in a drawer day one, I bought a longer top link for my tractor which is bigger and easier to use from tractor supply I use a old piece of bungee cord ( one with multiple holes) to hold larger top link in holder when not using an implement, the only issue I’ve had with my pats is when implement is beating around on rough ground the linchpins will pop open I’m thinking of sticking bolts with locknuts through them so they are permenent
Interesting. I lost a linch pin yesterday. But it was also undersized. I’ll keep an eye on that!
The Pats Easy Hitch was one of the first additions to my tractor. I love it, and am sure you will too. Do remember to remove the stabilizer bar when using a PTO driven implement. I store mine next to my seat. I love that it will fit all widths of 3-point implements, old and new.
Thank you!
I recently swapped from a quick hitch to the pat's easy change. I too have a few attachments that aren't quick-hitch compatible and I was getting annoyed by that. Also, on my 40hp, I couldn't reach the quick hitch levers to lock the hitch anyway, so I was already getting off the tractor to lock the implement. QH's are probably great for people with smaller tractors that can reach the QH from the seat and don't have a lot of attachments.
Nice! Thank you for watching and for your comments. -Ed
It looks like a very good system although the alignment bolts do seem a bit long which I guess is to enable it to fit lots of different tractors. I think I would be swapped those out with shorter bolts
I thought so too!
Ed, Thank you for posting. You have inspired me to get moving to install my set.
When I broke my ankle last May everything was put on hold. My set of Pat's has been collecting dust since last May. I have been procrastinating since January until i decide what length hydraulic top link to order to match with Pat's QH.
Now is the time for me to get it installed. I'm curious what length you needed to extend your Top Link to for the setup you just demonstrated today.
PS: Yes, the StayBar only stays on to get your implement pins alignment. Once it's attached then the StayBar gets removed as you indicated. It will easily get bent if left in place.
Thanks, Dan 😊
Thanks Dan. I’m going to pick up a longer top link. Probably 2” linger will be fine.
Thank you for making this video and introducing the Pat's Easy Change system. Great video quality, audio is excellent as well. Your explanations are clear and efficient. I appreciate that most of all. I'm still such a newbie to tractors! Can you explain what's meant by category 1 and 2?
Glad it was helpful! If you have a compact or subcompact tractor, you will have category one attachments. That’s the diameter of the pins that attached to the arms of the three-point hitch. Generally smaller than 1 inch is category one, and larger than 1 inch is category 2. Thank you for your kind comments! -Ed
I stick with my custom rear SSQA, with telescoping top link, so my front loader SSQA hitch is the same as the rear hitch. Now when l need to move my implements, l have the option either front or rear, common denominator 🤔
These cost $250. Plus a PTIO extension. For that price you can buy a nice QH.
I have a set of these. The only problem I've had is my implement catches on a water diverter on one side it can be ripped out of one of the Pat's and it is a bear to get it back in.
I do not see how Pat's system is much better than nothing as you still have to dismount to hook up the top link. A properly set up quick hitch is the way to go in my experience.
Oh it’s WAY better than not having one. That bush hog is a real pain to hook up otherwise. And it’s not QH compatible. Thanks for watching!
@@MyClutteredGarageEverything is QH compatible if you're willing to see what the hangup is and fix it. This should not be necessary but it often is and it's worth the time doing so for years of trouble free use.
Not every attachment is QH compatible.With Pat’s they are.
@@lonniechartrand if you purchase selectively and occasionally do a little grinding or welding everything is QH compatible. It's worth the time to do it right.
Good video. While I can see the Pat’s hitch good for some applications, it seems a bit too complicated for most applications IMHO.
Once it’s on, it stays on the tractor. So it’s actually quite simple and convenient. 👍
I would love to get Pat's easy change. But I don't know if it will work with my heavy-duty extended lower links.
Call them they’ll tell you
Worth the look as far as making it easier to hook up to your tractor. The price point:(.
Ty Ed interesting 🏆🏆👴🚜🐕🐕😎🙏🙏💜
The only issue I see with a small hp tractor is. The pats puts the load back another 4” past the factory hitch point which would lower the lift capacity. Let me know or do a video lifting the max with and without.
Thanks. So does a standard QH and I never had an issue. Lots of lift capacity back there!
I have a set of the Pat’s hitch units. They were never reliable and let my brush hog fall off. After the third attempt I just gave up. Also the hook is too big to allow me to use them with my old cultivator as the placement of the pins was too close to the main cross member. Also the instructions about the spacer rod is extremely confusing. I bent mine the first time I tried to use it.
I would call them. They have great customer service.
good product...been using a set for a few years. Ideal setup for the finish mower. Check those cotter pins....did not look like were bent out to keep them in place?
Good call!
As a farm kid, city teen, and going back to needing tractors as a homesteading adult, this seems extremely fiddly and looking at the HB and LP quick hitch systems, i feel like a quick mod could fix the finish mower issues
Now that it’s mounted and stays in place, it’s extremely easy to use and handy!
Im not sure this will work with my land pride box blade and some other land pride attachments. it don't have the pins sticking out, it has a 2 peace fork that the lower arms have to go into, then you put the pin in. this quick hitch would be too wide to fit in it looks like. But looks like it works great on attachments with pins sticking out.
I would check with pats. I think it may work.
I have a woods box blade that is built that way and my pats works great
Hit Like Button
How's that Bush Hog been? There's a similar (albeit smaller) BH SQ142 for sale near me that I've been debating picking up.
Works great! I could probably handle a 60”. This one is 48”.
@@MyClutteredGarage Thanks! I have a BX, so the 42" would match well for me.
who is herre?
…….what I made this
Learning
That looks jinky.
It’s very solid once it’s all in place 👍
I don’t see what’s quick about it
Hooking up my rotary mower took up to 10 grueling minutes without it.
Good choice. I’ve had Pat’s for three years now. No issues what so ever.
Good to hear!