How to operate a Carbon Arc

Поділитися
Вставка
  • Опубліковано 27 лис 2024

КОМЕНТАРІ • 566

  • @erikmutthersbough6508
    @erikmutthersbough6508 2 роки тому +100

    I got to operate a 800 million candle power WW2 searchlight as a kid. Every Christmas eve the church would hire a guy to run his searchlight. To create the North Star. He was very kind to show me how to run the light. I have loved carbon arc lights ever since ❤️

    • @captlarry-3525
      @captlarry-3525 4 місяці тому

      you were a Lucky Kid... see my comment above !

    • @bastarddoggy
      @bastarddoggy 4 місяці тому

      We had one of those at our city's new year's eve celebration. The operator showed me how it worked. Watching that big spotlight was the best part of the night for me.

  • @argonwheatbelly637
    @argonwheatbelly637 3 роки тому +338

    I was a projectionist at a theater in the before time. Had a pair of these working 20-minute reels. Never broke myself of the habit of looking for change-over dots in the corners. Eight seconds. You had eight seconds for the next reel to come up to speed so you could "open the blast doors", and get ready to hit the foot switch to swap shutters, and flip the sound switch at the same time. Then it was on to closing the door on the old reel, shutting down the projector, queue up the next reel, check the rods -- which you did continuously during the film in between making some emergency splices and running off the old reel back onto a new one (rewinding). It was a job. You might have ten minutes for a bathroom break, but if you saw the film starting to "blue", you had to race back and get those rods realigned...quickly. They would shelf easily, but at least you never opened the doors while it was running...mostly never.

    • @cobra02411
      @cobra02411 3 роки тому +20

      I have a friend into 16mm film and with the oversized reels depending on the movie it's one, maybe two switchovers. He's got two projectors and 2-3 times a year we do an outside movie night. Not as intense but I can relate.
      Having seen both digital and film based versions of movies there is no question that film is superior in experience IMO.

    • @malcolmgreig5193
      @malcolmgreig5193 3 роки тому +24

      I was a protectionist also in the 70's and 80's. I still see the cue marks on old shows. A 200 amp dc generator in the back room. Peerless arc lamp, simplex project, exhaust fans. Candy girls. Those were the days

    • @melody3741
      @melody3741 3 роки тому +5

      I want to listen to stories about that job... im sure they would be more than a little bit traumatizing to recount though. Sounds stressful.

    • @peterrivney552
      @peterrivney552 3 роки тому +6

      I remember back in the '70's going to the drive-in with friends using the carbon arc for the projector Ted's father taught me a quite a bit about it along with watching free movies evey summer good times back then.. and the bowl shaped mirror ...

    • @peterrivney552
      @peterrivney552 3 роки тому +2

      Go Blind...just like welding ..

  • @leokimvideo
    @leokimvideo Рік тому +60

    I was lucky enough to work on a film in the 90's (Power Rangers The Movie) where Carbon Arc lights where being used. The light from these was like the sun, big powerful good looking light. Sadly it was the last time I saw these amazing lights in action, and nothing since has ever come close to the brute beauty of the light that's generated. Seeing the name Mole Richardson also reminds me of the best studio fans ever developed. Powerful and quiet and again there's nothing like them today.

    • @Sasi-ex5yn
      @Sasi-ex5yn Рік тому

      Ironically the Fox Kids logo used two yellow Klieg lights to form the X!

    • @MadScientist267
      @MadScientist267 4 місяці тому +1

      This is a full spectrum light, to the eye, identical to the sun. Nothing beats fusion or incandescence for high quality CRI. The cost is efficiency... and in the case of the carbon arc, multiple pita factors, but when you need truly white light and the sun isn't cooperating......

    • @MadScientist267
      @MadScientist267 4 місяці тому

      ​@@Sasi-ex5ynNot irony, coincidence

    • @craigrryan86
      @craigrryan86 Місяць тому

      @@MadScientist267 Would love to see the spectrum of one of these. They produce infrared and UV?

    • @MadScientist267
      @MadScientist267 Місяць тому

      @@craigrryan86 Absolutely. Far reaching in both directions.

  • @adamjhuber
    @adamjhuber 3 роки тому +258

    The UA-cam algorithm succeeds again. I never would have looked this up, but I did enjoy it.

    • @bigdad6993
      @bigdad6993 3 роки тому

      Hell yeah

    • @leekazan556
      @leekazan556 3 роки тому +1

      Yea, it got me too!!

    • @herzglass
      @herzglass 3 роки тому +1

      I am on an old lighting techniques marathon for a few days now and I absolutely love it

    • @Paul_SD
      @Paul_SD 4 місяці тому

      Me now too👌😎

    • @martinswiney2192
      @martinswiney2192 4 місяці тому +1

      Three years after you. Same.

  • @graememellor8319
    @graememellor8319 3 роки тому +40

    Used a carbon arc projector as a young projectionists assistant back in the day, so reliable and easy to operate and maintain.

  • @russellwilliams846
    @russellwilliams846 9 років тому +303

    I have two Mole stories. I came to L.A. in 1979 to do sound for the movies and was scratching my way through low-budget stuff, some commercials and maybe a pick-up day on a feature or two then disaster struck. No, not an earthquake but close...the SAG strike of 1980. That work stoppage really shut the town down. People were losing homes, boats and lots of sleep. Career-wise, I knew my prospects were dim for the summer since all the "A-List" sound people were now available and looking for work. Who was going to hire a rookie like me?
    I had a friend in those days that was a gaffer/best boy and thought maybe I could drag some lights around since the only work in town was on commercials. He said take a number and get in line but...if you knew how to operate an arc lamp, then you move right to the front of the line.
    The next day I went to Jerry's deli and got their best tuna sandwich with extra pickles. I then stood right outside the fence in this video and bribed one of the Mole techs to show me that lamp plus lunch was included! One guy [I wish I could remember his name] told me to come back in an hour. I left him the sandwich. Sure enough, he kept his end of the bargain. He showed me the Heavy and the Lite weight head pictured in this video. I became the Arc-Angel for the rest of that summer! I never really had to do lighting again after the strike settled, but I never got in the juicers way ever again either. They really work for a living.
    Cut to the 1990's, I'm mixing Paramount's "Rules of Engagement" [feature not TV series] when director Billy Friedkin suddenly changed DP's. The "new guy" was the legendary Billy Fraker, ASC! He came over and introduced himself as my new best friend. Look, I only knew him from the countless American Cinematographer articles I had ingested before moving out to L.A. so this was our first handshake but not the last. He told me that over the weekend he was having 728 and 80 [electricians & grips] re-rig the stage. All the humming, buzzing HMI's were gone and everything ran on DC power. Dead quiet. Those arcs put out the cleanest, non-flickering man-made light you've ever-seen! I bet the facilities guys on the lot looked at the work order and saw the request for DC power! Who knows the last time time had fired up those generators. :-)
    This video sure brings back great memories! Thanks for posting this!

    • @kylewhytonen
      @kylewhytonen 3 роки тому +6

      I have a sound question for you; when doing location mixing, what are ways you and your team avoid ADR in the future, and on the flip side of that, what do you do in a situation where the location does not allow for clean dialogue recording?

    • @russellwilliams846
      @russellwilliams846 3 роки тому +31

      @@kylewhytonen HI Kyle. Excellent questions. The culture of the biz back then was to rarely if ever invite either the sound mixer or at least someone from the sound community to accompany the director, DP, Production Designer, et al on the Preliminary Locations scouts. This is one of the best ways to avoid unnecessary ADR that is tied to the actual location acoustics and surrounding environment, sonically speaking. With the script in hand, you will know approximately how many pages of dialogue they plan to get (if any). Will this be the site of some pivotal scenes or just incidental ones? While they are all 'looking', you should be listening to what could be problematic right there at the camera position, or out by base camp or even beyond (like airports, hospitals, schools if in session, etc.
      Conversely, by the time you are invited to ride along for the 'Tech Scout', they have made those decisions without your input. They have probably spent money to construct, or renovate, or paint or dress the set with furniture etc., and then you come in and point out that the place looks great but you're right under the flightpath of Burbank Airport, or two blocks from a construction site, or one block from a busy freeway and these scenes take place in the 19th century, so all that ambience is wrong.Given a heads up earlier in the process they may be able to find a suitable location that actually works for sound and picture, imagine that.
      Sometimes you may be working in a historical or actual place where events took place and therefore are dealt a hand that has no Aces. For those you would get a 'guide track' including all the noise you don't want in order that the actors can ADR later. Depending on how much dialogue there is you might be able to commandeer and van or suv with the actors and get them to do their performance over without camera so you could get some good wildlines that editorial may be able to cut in where we don't see lip sync. Sometimes this is necessary in places so noisy that the actors couldn't hear themselves on the track even though they all wore rf mics.
      Lastly, in the post process a lot of ADR is motivated less by location conditions and more by the actor or the director wanting a different 'performance' of the dialogue they captured. Many directors may not take the time but I asked several to turn their back to the video monitor before they were sure they had the best take in the can and just listen to the track as if it were radio. Many times I have discovered that if it doesn't work as 'radio' it might not be working visually either...but that's just me. :-) Hope this helps.

    • @kylewhytonen
      @kylewhytonen 3 роки тому +10

      @@russellwilliams846 Hey Russell appreciate the answers and information! That’s a very interesting element that the production wouldn’t request the sound departments input on location scouts it seems terribly important to have sound there for that.
      In the scenarios when you HAVE been on a scout and noticed prevalent audio issues and brought them up to production, was there any solution met?
      I would assume, as the mixer for period films like Glory or Dances... and an airplane is flying over location would not only give the sound issues, but also take the actors out of their moments.
      That is a revelation about ADR also being used to create a different performance in post, I’ve always looked at it as a fix for audio issues only, that’s an eye opener, and gives me a bit more confidence when doing my next gig Thank you!!
      Can I ask one more question, sorry to bug you....working with Spike, shooting on location in New York, what are the challenges in getting clean dialogue on the streets in comparison with shooting something more intimate on a stage like 12 Angry Men?
      Thanks!!

    • @russellwilliams846
      @russellwilliams846 3 роки тому +11

      @@kylewhytonen From the bottom up, no prep in the schedule is the reason I declined to do "Malcolm X" No comparison as it relates to "12 Angry Men" as all 12 have excellent voice control and we are in a controlled environment. Billy Friedkin actually had special FX do a demo for me to listen to their 'rain gag' as some scenes would have dripping water on the windows to simulate weather.On "Training Day" not only did Antoine Fuqua have the whole movie 'boarded (and each dept got a copy of all the storyboards) we were (cam. snd, grip,elec, FX) were at the facility where they prepped the cars, so when we were on the process trailer we had cable pre-rigged to xlr boxes behind the passenger seats. That stuff stayed on the trailers (2 insert cars and trailers everyday we did car stuff) until we went on stage. THe grips got these three foot thick blocks of foam rubber that were large enough to put under the 'shell' of the car [no wheels, suspension or drive train just the compartment, doors and windows]. That way the shell wouldn't move with respect to the trailer floor. That's the benefit of prep.

    • @kylewhytonen
      @kylewhytonen 3 роки тому +9

      @@russellwilliams846 Wow never knew boards were so important to sound, but that makes perfect sense when knowing what to expect when shooting in regards to setups and challenges. Those scenes in the car in Training Day are so integral to the story and character, so being able get the performances clean and taking the steps to do so the right way, can’t not make the film better. Will have to watch the film and those scenes again with that in mind.
      Appreciate you taking the time to give me some insight on the process, thank you!

  • @lurkersmith810
    @lurkersmith810 3 роки тому +30

    I'm a computer geek (I work in IT), and have a fascination with old tube radios and phonos. Yet the algorithm knew I needed to know how to operate a Mole Richardson carbon arc lamp, and I love it! I find film fascinating and have been lucky enough to have service calls at several of the major Los Angeles studios, where I always take the long way out when I'm done.

  • @LaLaLand.Germany
    @LaLaLand.Germany 4 роки тому +358

    What about the van? Most interesting custom made, it seems. And quiet for 1000 amps, What´s the story with it? Is it still around?

    • @Chris_Troxler
      @Chris_Troxler 3 роки тому +36

      A tandem axle Econoline? I'll take it.

    • @jhoncho4x4
      @jhoncho4x4 3 роки тому +34

      I only clicked for the van.

    • @lanewells5290
      @lanewells5290 3 роки тому +15

      Please do a tour of the van

    • @neriozulberti1492
      @neriozulberti1492 3 роки тому +2

      @@jhoncho4x4 me too three axle

    • @SongWhisperer
      @SongWhisperer 3 роки тому +9

      That van is made to carry some heavy loads, thats for sure.

  • @NofaKingway
    @NofaKingway 3 роки тому +12

    Man, no kidding on that quality light. As soon as you stepped in front of that lamp it was almost night n day. I really appreciate quality and craft, Ian see why these have fallen out of favour, despite their beautiful characteristics. Thank you for taking the time to share your families story and the technicalities of operating such a machine!

  • @nobodysbusiness87
    @nobodysbusiness87 3 роки тому +7

    That carbon lamp is an absolute beast and so is that tandem axle van. Very cool!

  • @Vinnybrain
    @Vinnybrain 11 років тому +114

    Fascinating!! Equally fascinating is that we have a relative of the INVENTOR not out on his yacht,sipping champagne, but here Teaching us how to use the gear and some history---sharing his knowledge. Thanks M-R, and Mr Parker on a job well done!

    • @L7Mcmacdaddy
      @L7Mcmacdaddy 3 роки тому +6

      I doubt the INVENTOR was ever out yachting, let alone his relative

    • @ActivateMission2ThisTimeline
      @ActivateMission2ThisTimeline 3 роки тому +3

      Carbon arc lamps were around in the early 1900s. This may be the inventor of this smaller type units.

    • @mokuzu993
      @mokuzu993 3 роки тому +1

      the germans use cabon searchlights in WWII on the same
      principle... so inventor no

  • @kutzbill
    @kutzbill 3 роки тому +2

    So many years ago, my parents lived about 6 miles from the river. The barge tugs at night would use carbon arc lights to spot their targets. I would be in my bad, looking out the window and the lights would light up the tree tops. Kind of a good memory of cool summer nights.
    Smiles!

  • @ph11p3540
    @ph11p3540 3 роки тому +115

    Now imagine feeding over 10,000 times the amps as this 600 volts of triple phase power and you got yourself an electric arc furnace for converting iron into steel or recycling old steel.

    • @jameswilber518
      @jameswilber518 3 роки тому +10

      Mole Richardson guy: I can strike a one inch arc! Foundry dude: How cute.
      My neighbor ran the crane at Ford Rouge Steel, I don't remember the size of the bucket, but they struck a 6ft arc!

    • @majortwit
      @majortwit 4 місяці тому

      Yeah, and bring the charge out of the rain a couple minutes before. Just let me know first so I can take my break 😬

  • @gregkruegermann8164
    @gregkruegermann8164 3 роки тому +4

    Worked for Mole in 1983, 1 year in the rental dept. The van used to be red and I remember all those lights, globes, stands and cables. Brings back great memories, Mike Parker gave me the job and i remember Larry as well.

  • @howardmaryon
    @howardmaryon 2 роки тому +3

    Wonderful to actually see the man himself, demonstrating what was an essential lighting tool for the movie industry worldwide until led lights and hdmi lights took over, and film speeds increased. I worked at Pinewood in England in the ‘60’s and ‘70’s, and those lights were in constant use on the James Bond films. The “evil genius lair” sets, which were huge and incredibly expensive for the time, could not have been lit well without the big Mole Richardson arcs, hired in from Samuelsons, in London.

  • @MysticFrequencies
    @MysticFrequencies 10 років тому +33

    Awesome video! thanks for sharing!
    I have built, restored, maintained and operated the huge 60 inch carbon arc searchlights (GE and Sperry) for 31 years. Always enjoy seeing other carbon arc lights operating :)

    • @npsfam
      @npsfam 3 роки тому

      cool, I once almost purchased one of those searchligh rigs. Use to be a lot of searchlights in advertising, but I heard, the carbon rods were getting difficult to procure.

  • @charlesward8196
    @charlesward8196 3 роки тому +4

    As a kid growing up in the 1960’s there were lots of carbon arc “searchlights” used in shopping center and car dealer promotions. This is the first time I have ever seen how they work> Thanks for the content!

    • @jackflash6377
      @jackflash6377 2 роки тому +1

      I had completely forgotten about those lights that used to dance around the sky at night.
      Once or twice we visited the parking lots where you would find three or four big "batman" style lights (at least that's what I called them since they looked like the same light used to call batman).

    • @AffordBindEquipment
      @AffordBindEquipment 4 місяці тому +1

      Totally agree. Great memories of childhood.

  • @3636054
    @3636054 8 років тому +22

    I did a Western in Flagstaff in '86. Two Lighthead Brute arcs and even a Duarc.
    Great lights; they each have a personality. Actually, each trim has a personality.
    And they kept the brothers workin'! Each lamp (sometimes two, if close together) needed an operator. I can recall various old-timers showing up to work w/ one pair of heavy leather gloves and one pair of pliers. (Maybe a small flask too)
    Notice a fold-up handle at each corner of that head. Yup, one man on each corner to lift it. It may look like a giant Midget, but it is truly a Heavy Head.
    Good times. IATSE 728 - Los Angeles

    • @6181green
      @6181green 3 роки тому

      Neat story thanks for sharing 👍

  • @canweshoot
    @canweshoot 12 років тому +9

    This is a terrific historic resource. My career began as HMIs were moving in strongly, and Brutes were no longer on any of the sets I worked on. I was lucky to have a good education on their light, and differences with discharge types. Young folks often ask questions that lead to an explanation of spectra, the black body curve, and CRI. I love to send them here to see this video to see what a Bruite is. Thanks Mole-Richardson for making this available!

  • @glenmartin2437
    @glenmartin2437 3 роки тому +4

    Thank you.
    I learned to use the copper clad carbon rods in the old 35 mm projectors. Your video brought back some good memories.
    Thank you again.

  • @encoencomen8361
    @encoencomen8361 3 роки тому +3

    I learned how to operate the beautiful Mole arc light in 1988. Operated them in Commercials till the mid 90's. Sorry to say I haven't oparated one in over 20 years. Those grids made great heaters on those cold nights.

  • @slipperyjim1497
    @slipperyjim1497 8 років тому +5

    Thanks for this video! I haven't worked with a carbon arc since I started in the business 20 years ago and this video brought back memories.

  • @glmemory
    @glmemory 11 років тому +3

    In High School, I was a theater projectionist. We used DC Carbon arc in the projectors. In a nearby room was the large rectifiers to make AC into DC from line AC power. Anode and cathode. The projectors had chimneys out thru the roof to carry the resulting smoke. Both projectors had broken mirrors, but I'd keep "repairing" them with metal tape. The carbon rods were copper coated. I kept a few for memories sake, but It's been 20 years since I saw em in a box in the basement. Fun stuff.

  • @lbochtler
    @lbochtler 4 роки тому +3

    Lit up an old Carbon Arc today, been sitting for many decades now, and it lit quite nicely. beautiful light, the video dose not do it justice, one must see it in person.

  • @AdamBloodgood
    @AdamBloodgood 9 місяців тому +2

    This is incredible. The world is a better place because of this man.

    • @MrShobar
      @MrShobar 4 місяці тому

      His grandad. Maybe.

  • @djcfrompt
    @djcfrompt 3 роки тому

    Always a pleasure to see folks keeping these old arc lights alive. I had the good fortune to work at a historical site with a working GE 60" AA searchlight - same basic principle, but with a 5' diameter housing, a throw measured in miles, and no way that you're standing in the beam and keeping your eyesight. Lots of fun to show off to visitors. Thanks for sharing!

  • @vasaricorridor7989
    @vasaricorridor7989 4 місяці тому +4

    as a kid in the late 50's on moonless nights occasionally you would
    see this brilliant beam sweeping the night sky, at that time advertising
    the grand opening of a dealer ship was common..you had to be there
    to appreciate it. some of the mobile units had four smaller dia. lamps
    which rotated independent of one another

  • @finalorbit
    @finalorbit 12 років тому +3

    I was just talking to a friend about how using this babies is become a lost art. Glad you documented this! I'm sure that someday some young director and cinematographer are going to use these for a project and they'll come in vogue again. (I hope!)

  • @charlesbeaudelair8331
    @charlesbeaudelair8331 3 роки тому +1

    Loved the video! I used to work as a projectionist for some years and my boss used to talk to me about the old arc light cinema projectors. First time that I can really witness the technology 'first hand'. Thank you.

    • @peterrivney552
      @peterrivney552 3 роки тому +1

      I remember in my younger years in the projector room at the drive-in that my buddy's parents owned with the carbon arc lights in the Camara and the bowl mirror to reflect the light..

  • @Cheeseboat20
    @Cheeseboat20 4 місяці тому +1

    This video is a piece of history. I'm glad I stumbled on it

  • @emilianomarquez1629
    @emilianomarquez1629 9 років тому +2

    Man, that was awesome. It was a joy to watch it work. I was born too late to use these. Thank you Larry !

  • @randy51
    @randy51 4 місяці тому

    From Randy in Chattanooga, Tennessee: I have operated the Strong Futura series lamp houses, and I loved them. I have also operated the old Peerless Magnarc lamp houses with the old lamp type rectifiers. Ran across your channel by accident, but now I’m about to be a subscriber. Keep up the good work.

  • @utubehanna
    @utubehanna 3 роки тому +2

    I loved seeing this! Thank you for sharing! Hats off to your grand dad. Nice bit of engineering…

  • @seanmurray1205
    @seanmurray1205 Рік тому +1

    What a blast from the past!
    We got to do a project with a Brute Arc Light very much like this at CBS Radford Stages in the 1990s, even then it was almost a museum piece. We got operating lessons from some of the older guys from the CBS Lighting Department. They came by a few times to check up on us. I joked with them that I was still getting the hang of it, but I kept scorching my forearm when I reached in with C-wrench to change the lower carbon from time to time. I was surprised when they told me “No, you’re doing it right!” The guy patted me on the back and says “now you’ve got you’re sergeant stripes!” He went on to explain, in the old days when you walk around the studio lot or went to the commissary, you could spot the electricians because they had tell-tale scorch marks on their forearms from changing the carbons- “We called those your sergeant stripes! You’re doing it right!”

  • @boltonky
    @boltonky 3 роки тому +1

    awesome find of the day, i love videos on old equipment they built them right for sure

  • @ThriftyToolShed
    @ThriftyToolShed 3 роки тому +1

    I am just finding this. Very interesting! Enjoyed this very much. Thanks for sharing. Would love to see more on the generator...

  • @MSMediaRotterdam
    @MSMediaRotterdam Рік тому +2

    Beautiful piece of equipment. For this type of light the Eiffeltower in France was built; partially because it was Mr. Eiffel's goal to show the world what could be done with iron constructions. Paris was lit up by carbon arc light but it turned out to be too powerful at last. People complained about it and so it was switched off at last. It was *very* powerful: you could read a paper just if it was daylight at the time. Birds awoke because they'd think it the sun was up already.

  • @NullStaticVoid
    @NullStaticVoid 4 місяці тому +2

    A few film foundations that take projecting very seriously still use carbon arc.
    I know Pacific Film Archive used to do that when I lived in the Oakland, Berkeley area. Never seen such vivid, even natural light. It makes black and white films look more lifelike.
    To be fair their projector must have the best lens ever.

  • @RJPatt
    @RJPatt 8 років тому +324

    Am I the only one more interested in the tandem van?

    • @stevenking2980
      @stevenking2980 8 років тому +15

      That's what I wanted to see. Bad ass!

    • @RJPatt
      @RJPatt 8 років тому +3

      +Jc Wolf ?

    • @jonathanfurtado6880
      @jonathanfurtado6880 4 роки тому +12

      Right?! I want the story of that! Were the generators built into them?

    • @NBC_7
      @NBC_7 2 роки тому +2

      Came here to say this

    • @henriknilsson7851
      @henriknilsson7851 4 місяці тому +1

      Cool van…

  • @oldmech619
    @oldmech619 3 роки тому +1

    Thanks for doing the carbon arc video. As a kid I was always fascinated by them.

  • @ypaulbrown
    @ypaulbrown 3 роки тому +18

    this was fascinating, I remember driving by the plant many times in the 80's....my dad during WWII was in charge of some little arc lights in the South Pacific, those 800 million candle power babies made by GE and Sperry, we never missed going to a shopping mall or car dealer opening when one was fried up....I wish I had gotten to talk to him more about them.....cheers from Orlando Florida, Paul

  • @HenauderTitzauf
    @HenauderTitzauf 3 роки тому +3

    My cousin used to work at the movie house in Mt.Airy, NC, as a teenager, and I was only 13, but, he took me in with him.And he had to put the “rods” in the movie projector,rewind the films,put out for pickup bu the movie courier.There was a very small window to look thru to check on the rods, and to adjust them.Man was that part HOT to touch and even with the good lens, it was bright.

    • @peterrivney552
      @peterrivney552 3 роки тому

      I know what you saying there my buddy's parents owned a drive in out west and in the film room a few times telling me the bowl mirror was expensive back then that was the '70-80s even with the dark glass the light was very bright and showed a full spectrum...

  • @profwaggstaff
    @profwaggstaff 10 років тому +7

    Awesome. I was lucky enough to learn much of the old techniques for projecting with arcs when I worked as a young man in a chain of old theaters. So the carbon arc technology is familiar. But it's great seeing these large stage lights. Very cool. Thanks.

    • @peterrivney552
      @peterrivney552 3 роки тому

      I remember I'm my younger days hanging out with some friends that had parents that owned the drive in and the had carbon arc lights in them as well as the bowl shaped mirror...good times back then

  • @woopimagpie
    @woopimagpie 3 роки тому +3

    When I worked as a projectionist many moons ago some smaller cinemas still had carbon arc lamphouses in use. The carbons burned down in about 30 mins so they weren't any good for full feature films unless you ran them on 20 minute spools with changeovers between reels, which is how it was done in the old days. During my time in the industry it had mostly gone over to xenon lamps that had a life of 2000 hours and only required the flick of a switch to start them. Much more practical. The old carbon arc machines were only being used to show film ads and trailers before the feature by that time. I sure did love tinkering with them though, and the quality of the light was better too - a much more accurate light spectrum than the xenons when you got them burning just right.
    Of course it's all dead tech now - the new digital equipment has replaced all that dirty noisy old gear these days, and a projectionist is no longer required. I'm told by those still in the game that xenon lamps are still used to project the image though, so at least one facet of the tech is still in use anyway.
    It was great to see an old carbon arc lamp once again, so thanks for that.

  • @olgierdogden4742
    @olgierdogden4742 3 роки тому +10

    I remember making a rudimentary Carbon Arch in the mid to late 1960’s with battery cores and the mains and I’m glad I only had it going for a few seconds as it lit up my bedroom. Oh brother was it bright and not to be repeated as the consequences of an accident could have been more than serious.

    • @kaptainkaos1202
      @kaptainkaos1202 3 роки тому +1

      I did the same thing! Did you use the carbon rods from the squarish lantern batteries? Those are what is used and looking back I now realize how lucky I was not to have burned down my house.

    • @olgierdogden4742
      @olgierdogden4742 3 роки тому +1

      @@kaptainkaos1202
      I seem to remember that I used the carbon rods from depleted uranium… NOT! The carbon rod’s came from a A1 battery or 2 of them. And then rapped the mains around the ends of the rod’s and lit up my bedroom like there was another sun shining. Something that I should have done outside or at least in a outhouse of sorts. I’m glad I survived that little excursion into being a lay-scientist of 13 years old fully intact.

    • @bichela
      @bichela Рік тому

      Lots of UVC there plus mains voltage is lethal. Lucky you did not go blind. Or died.

  • @nixxonnor
    @nixxonnor 3 роки тому +53

    This thing reminds me of the anti aircraft / anti warship torch we used in the coastal artillery in Norway until 30 years ago. Until the 1991 Iraq war showed us all that stationary artillery is no longer good for defending any territory against serious threats. The torch we used back then was a 1000 mm (1 meter) torch of nazi origin that was adopted after WW2. I guess it was 4 times more powerful than the Hollywood thing shown in this video. It had an 8 or 12 piston nazi Diesel generator powering it all. We accidentally placed the beam at the the Oslo - Kiel ferry in '89, and the ship made a comple stop from 15-20 knots. Go figure what they experienced. Distance to target was ~1 mile. And if we by accident hit a seagull in mid flight at night, the poor thing fell straight into the sea, even at a great distance...

    • @fredorico41
      @fredorico41 3 роки тому +2

      Wow thanks for sharing, I learnt a bit about these light from watching battleship New Jersey.

    • @nixxonnor
      @nixxonnor 3 роки тому +1

      @@fredorico41 I just googled the legacy torches we were using until 1991. They were actually 1,5 m (or 1500 mm) ones.
      Here are the specs:
      Brand / Make: AEG / AZG, ELC / Siemens-Schukert, Körting-Mathisen
      Nationality: German
      Mirror diameter: 150 cm
      Focal length: 65 cm
      Brightness: about 500 million revenge candles, 460 million new normallys.
      Effect: ca 16 KW. (78 volts, 200 amp.)
      Range: 22000 meters under favorable conditions.
      Weight, headlights: 2500 kg
      Weight, trailer: 1750 kg
      Total weight: 4250 kg
      translate.google.com/translate?sl=no&tl=en&u=www.hestvik.no/Thorgrim/AEG150cm.html

    • @nixxonnor
      @nixxonnor 3 роки тому

      More on the Hefner light unit: www.sizes.com/units/hefner.htm

  • @FF5754
    @FF5754 3 роки тому +2

    This is freaking super cool!!! I'm sending this video to everyone. Makes me want to go out and buy one of these and try it out at night over the water and see what i can see out there. Great video!!!

  • @RedHeadForester
    @RedHeadForester 2 роки тому

    I'm glad the algorithm showed me this. Really nice video, interesting, and well presented. I get Jay Leno's Garage vibes... passionate, informed, relaxed.

  • @ericdee6802
    @ericdee6802 3 роки тому +1

    Awesome light, I like the three axle van too! 👍

  • @brucelawson642
    @brucelawson642 3 місяці тому +1

    AWESOME !!! Thanks for the lesson. Amazing machine.😊

  • @mufilmfest
    @mufilmfest 2 роки тому +2

    When I was first working at Moore Egyption in Seattle, Dan Ireland would light a cig off the carbons after shutting it off.

  • @hemantkharkongor5433
    @hemantkharkongor5433 3 роки тому

    One of the coolest videos i have seen in 2021 ...thank you sir ...you made my day today ...👍

  • @allenfunstuff
    @allenfunstuff 3 роки тому +3

    I really enjoyed this video I remember seeing one of the Old world war II search lights that operated with carbonarchs on the end of the pier in Daytona Beach many years ago. I really enjoyed seeing how the movie lighting worked using the similar principles.

  • @reclusive_potato
    @reclusive_potato 3 роки тому +32

    Wait until PhotonicInduction gets a hold of one of these...

    • @HiTek3
      @HiTek3 3 роки тому +3

      "We're gonna pop it"

    • @narikira4793
      @narikira4793 4 місяці тому +1

      if you watch styropyros video with the car batteries he arcs some carbon together and its mental how bright it is haha, he also cut a microwave in half with it

  • @mm5478
    @mm5478 5 місяців тому

    One of the most interesting videos I’ve seen in a while.

  • @ronniepirtlejr2606
    @ronniepirtlejr2606 3 роки тому +1

    I remember seeing a Searchlight in town around 20 -25 years ago. It operated with the carbon Arc inside. I don't remember what the event was but, I do remember the light. You could see it from 10 miles away!

  • @glashoppah
    @glashoppah 4 місяці тому

    I made one when I was a kid out of a transformer and a pair of carbon rods from the inside of D-cell batteries. These videos can't even begin to show how bright that arc is. Even my tiny low-amp arc with two tiny carbon rods made a blinding arc.

  • @oaktadopbok665
    @oaktadopbok665 3 роки тому +1

    There used to be a carbon arc lamp atop the Palmolive Building on Chicago's near north lakefront. It was called "The Lindbergh beacon" and was at the time the brightest carbon arc lamp in the world. It could be seen for more than 30 miles over Lake Michigan.

  • @jerrymurrel7722
    @jerrymurrel7722 9 років тому +2

    Wonderful video of Larry Mole Parker with the Brute Arc. :)
    My mentor, Foster Denker loved using Brute Arcs on shows.

  • @isettech
    @isettech 4 роки тому +2

    Used to run a par for movie projectors. The carbons were copper clad. The negative is about the size of your positive. The generator ran 70 volts and the arc ran about 25 volts at 70 Amps so it was considerably lower power. With film, you have a heat limit on the film. Unlike that projector with a large front lens, the carbon arc projector lamp has a polished reflector behind the arc to focus the light to the film frame and does not use a lens. Due to the mirror, the strike raises a guard past the negative to prevent strike debris from hitting the mirror. This is lowered after the strike. Behind the mirror is a bar magnet to blow the arc away from the mirror and up so the flame is not casting shadows from the positive which is in front, not the rear. The short small diameter negative extends through a hole in the mirror to the drive motor. There is no polarity indicator light. Projectors were permanent installations. In a new installation, polarity is verified at strike. Due to the magnet, the incorrect polarity will blow the flame down. When that happens, immediately disconnect power and reverse the polarity. With polarity reversed, the carbon feed motor runs backwards.

  • @hodah
    @hodah 8 років тому +108

    Please make a video showing us what happens when you fill the head with popcorn.

  • @DoItAfterSmoking
    @DoItAfterSmoking Рік тому

    This video just answered all my questions about how this spotlight works. I clapped my hands when he said "we are going to start it with the door open". Bravo!

  • @sailormann1
    @sailormann1 6 місяців тому +1

    Awesome demo, and that 1000 amp geney (in the van) is freegon Quiet!

  • @peterrivney552
    @peterrivney552 3 роки тому

    This is an excellent video I remember the old drive in out west having projectors like this... I thought I would never see one of these ever again... This is the first time I seen it since 1980 good fun times never end they just become memories...

  • @zbdot73
    @zbdot73 4 роки тому +3

    Carbon arcs were used in the original blade runner in outdoor scenes. I find a lot of today's films, particularly sci-fi's have a very flat look to the them (look at 2049 vs orig blade runner). I've come to the conclusion it's a combination of the digital cameras and LED lighting used now. Pre the digital era, film stock added grain and filament lighting and carbon arcs also added a slight natural variability to the lighting levels resulting in the film magic we see in these older flicks.

  • @MrWaalkman
    @MrWaalkman 4 місяці тому +1

    We used a carbon arc lamp for exposing the metal sheets that we used in our print shop. That was a long time ago. :)

  • @Psycandy
    @Psycandy 3 роки тому +5

    wow. we used to only get carbon arc for drive-ins. i'm sure the original Blackpool illuminations were carbon arc, it's one helluva light

  • @JaenEngineering
    @JaenEngineering 4 місяці тому +1

    I remember using CA super troopers even as late as the early 2000s. Nothing could touch them on big outdoor festivals, especially during the lighter hours. Wouldn't surprise me if there's still some kicking about...

  • @arclamp
    @arclamp 12 років тому +3

    Great video! Nothing beats the carbon arc for light quality. It's sad that good carbons are getting very difficult, if not impossible, to find nowadays.

  • @stettan1
    @stettan1 7 років тому +8

    Extremely interesting. Never knew that their light quality was so excellent. I rather thought it was like a mercury arc where the electrodes are going sour, so it flickers. Would love to see one operating.

    • @telocho
      @telocho 3 роки тому +1

      Before Xenon, cinema projectors were all carbon arc.

    • @psirvent8
      @psirvent8 3 роки тому +1

      @@telocho Didn't they use halogen at some point ?

  • @FixitFrank
    @FixitFrank 3 роки тому +1

    I may be wrong as I can't see inside it, but your "grid" is likely akin to a ballast. It's job is to limit the current(amps) to the electrodes. Arc's a negatively resistive and will take whatever current they can get. The Grid box keeps that current to a manageable level so your electrodes dont wear too fast or melt the mounting points(among other reasons I am overly simplifying the explanation).

  • @b6schilke996
    @b6schilke996 3 роки тому +18

    Used to run a theater projector that ran on same principal. If you weren’t paying attention the movie would get dark after the rods burned back

    • @badatpseudoscience
      @badatpseudoscience 3 роки тому +1

      Yes. My uncle ran a theater that used carbon ark projectors. When he was short handed, he would get me to run the projectors. I remember adjusting the feed rate. I remember me and my friends watching movies from the projection booth. The worst place imaginable to watch a movie from. But it was the *projection booth* so me and all my fiends thought it was cool. Do you remember changing projectors?

    • @badatpseudoscience
      @badatpseudoscience 3 роки тому +1

      There was something about the light from those projectors that you don't see today.

  • @Ma_X64
    @Ma_X64 4 роки тому +1

    Quite archaic. There are arc lamps that uses parallel rodes with separator. So no need to adjust rodes. Also Tesla used high frequency alternating current that cause equivalent burning out of both rodes. Of course it can be that you can't use high frequencies because of radio noises but you can just periodically swith polarity.

  • @TungstenCarbideTempe
    @TungstenCarbideTempe 3 роки тому

    Wow this is amazingly interesting. I’ve never thought that a simple light would be that complicated. Awesome. Thank you for sharing

  • @alexxrider89
    @alexxrider89 3 роки тому

    Good morning my name's Alexx Parker & I'd like to talk about how awesome you are for making this video. Thanks & have a wonderful day 🤙

  • @Ragnar.Lothbrok.3.14
    @Ragnar.Lothbrok.3.14 3 роки тому +11

    This guy could make a McDonalds checkout cashier sound like an advanced mathematical degree was required.

  • @ryangrimm9305
    @ryangrimm9305 3 роки тому +2

    I worked at a hardware store in Boston that STILL has carbon rods IIRC.

  • @bcgrittner8076
    @bcgrittner8076 3 роки тому +17

    Wasn’t The Wizard Of Oz filmed under carbon arc light? That would pre-date this featured light. I read that the film used for that movie had a speed of 8. That necessitated the carbon arc lights.

    • @Kevthebish
      @Kevthebish 3 роки тому +1

      Yes your right and I think ze Germans had a similar type of light long before that to spot allied planes and try to blow them out of the sky. I think that guy's grandfather worked for the Reich before coming to Hollywood

    • @kaptainkaos1202
      @kaptainkaos1202 3 роки тому +1

      @@Kevthebish I came to this video from a WWII German aircraft search light video.

    • @Kevthebish
      @Kevthebish 3 роки тому

      @@kaptainkaos1202 You don't say? Imagine that

  • @andyf80
    @andyf80 10 місяців тому

    Super cool! Very informative and exactly what I was looking for.
    I just learned the term carbon arc as it relates to movie projectors and this makes perfect sense now! Thank you!

  • @Genners111
    @Genners111 6 років тому +5

    The song "Blinded by the Light" takes on a whole new meaning....

  • @peterrivney552
    @peterrivney552 3 роки тому

    I remember years ago a small drive-in out west back in the '70's I used to hang out at with some friends that used the carbon type arc for the lights for the projectors and the perfectly bowl shape mirror .

  • @dodgydruid
    @dodgydruid 3 роки тому

    I've always been interested in this stuff, Charles Brush considered the first proper carbon arc inventor brought his stuff here to Britain and today Brush remains a very well known name in railways as much as remembered for powering the first electricity networks in London. Certainly Brush's company became entwined with British military innovations and even built aircraft for the Royal Navy.

  • @RedPhoenixFire
    @RedPhoenixFire 8 років тому +11

    wow. i seem to know how to operate a carbon arc now! thank you for giving us a very good demo! awesome!!!
    1 question though:
    -how many hours can we safely keep it running?

  • @jonathanfurtado6880
    @jonathanfurtado6880 4 роки тому +4

    As a teacher, i'm curious about the early beginnings of on set lighting technology. Was the carbon arc light the first artificial light source used on set? Did Mole create the carbon arc fixture first for the industry? When did they first go into service?

  • @tomsmith4907
    @tomsmith4907 Рік тому +2

    A lucky buddy of mine has a MASSIVE working ge ww2 anti aircraft spot light with original generator trailer it uses carbon arc as well He restores mil vehicles for military reenactments around the us

  • @vandliszt
    @vandliszt 2 роки тому

    Beautiful machine simple instructions, simple to use, quality on all ends.

  • @henrytomlinson3634
    @henrytomlinson3634 3 роки тому

    Very interesting thanks, it is a fantastic light I have never seen one before. All the best from Henry in the UK

  • @michaelp.9921
    @michaelp.9921 3 роки тому +2

    Thank you for sharing an interesting demonstration!
    When you mentioned "throw your HMIs away", I wondered if it would be true if digital cinematographers today would have less trouble with image flicker when shooting different frame rates and shutter speeds if they just used carbon arc lamps instead of HMIs?

    • @Eli.Suarez
      @Eli.Suarez 3 роки тому +1

      HMI is not LED. it is another ARC source with a higher color temperature

    • @michaelp.9921
      @michaelp.9921 3 роки тому

      @@Eli.Suarez : Actually, I didn't think (or say?) that HMI was LED. I just have heard that there is sometimes flicker problems in the recorded video (and not seen in the HMI light itself on set) when shooting with HMIs powered with magnetic ballasts. I just thought I'd give a plug for old-fashioned carbon arcs here, since I don't believe they can cause flicker problems for film and video like HMIs sometimes can.

  • @peep39
    @peep39 3 роки тому

    holy crap now I know why I have seen lights smoke. I don't know why this was recommended, but I am glad.

  • @docnateizzy
    @docnateizzy 7 років тому +3

    Outstanding demo

  • @jaimecosman1304
    @jaimecosman1304 4 роки тому +1

    what quality amazing , also love the dual rear wheels on the van looks great !

    • @lorenzoboyd6889
      @lorenzoboyd6889 3 роки тому +1

      My girlfriend is so fat -
      How fat is she?
      I had to add a third axle to my van!
      (...sorry, couldn't resist)

  • @pegbars
    @pegbars 7 років тому +3

    They are absolutely the best light. For projection, too (at least, until the labs changed their print timing for xenon).

  • @STHFGDBY
    @STHFGDBY 4 місяці тому

    It always amazes me how great the minds of some people can be in inventing things like these lights.

  • @Rom2Serge
    @Rom2Serge 3 роки тому +1

    Such beatutivul memories! I was a gaffer in Russia we also use to use carbon arc lights in the 80s.
    I hope cameraman didn't get a UV burn when you opened a lid 🤣

  • @Mars-77
    @Mars-77 4 місяці тому +1

    I used to have to change the carbon arcs in our spotlights when I worked on the river tow boats.

  • @kamicotler2759
    @kamicotler2759 9 років тому +5

    Thank you for this video. I grew up on a TV set in the 70's and this arc brought back so many memories. Any chance you have an old 9 light you can feature?

  • @TheADHDCraftsman
    @TheADHDCraftsman 3 роки тому +1

    I love carbon arc lights. They're so cool!

  • @offontv
    @offontv 4 місяці тому

    Very nice ! I’ve got a couple of 2k I think ! M&R lights on tripods here in Scotland 😅 love to get them working for use

  • @steveshelley99
    @steveshelley99 3 роки тому +1

    Excellent video! Is there by chance another one that shows how to replace the carbons?

  • @Phil_Taz
    @Phil_Taz 2 місяці тому

    My carbon arc story is that as an apprentice in the printing industry, we used them for exposing photographic plates. We had a bathtub-like reflector with 4 pairs of rods and if you turned it on and one of the pairs didn't 'strike', my boss said to "Put one hand behind your back so you don't get electrocuted and tap the back end of the rod with your finger". That would make it catch. Did that for 2 years, also lit cigarettes from the end of the rod just after turning off while it was still glowing. There was no shield, it just looked like a half size enamel bathtub on it's side and the rods stuck out above and below with a huge transformer underneath. The "Good Old Days" that almost killed me.