There is a huge drawback to this bike which should be brought out & that is the difficulty in removing the back wheel. There is a video on UA-cam showing it. You have to dismantle the whole back of the bike to get it off it requires special tools. To me this makes this bike a no go.
Back tire not that complicated, crank puller on Amazon cost like 15 bucks and standard freewheel tool to remove flywheel. It looks harder then it is but the screws and the panel really only take like 10 15 minutes to take off. I agree would have been nice if they put the connector on the back closer to the rear rim to avoid the extra steps. I put Pirelli mandrake 90/80/16 on mine so hopefully don't have to worry about flats for a long time. I have a video on UA-cam that shows the tire on my bike. Electric bike moto/scooter tire upgrade is the title of video if you would like to check it out.
Yeah, that’s great when it’s not raining in the suburbs on a leisurely ride. But when you got’s to disassemble half the bike to change a tube (because sometimes patches just won’t stick) whilst delivering food stuff at night , or whatnot, in some ghetto you’re not familiar with? That’s another story. Don’t get me wrong, the bike rides great, but to totally dismiss the cons of it does a disservice to others trying make an expensive decision when perhaps buying a Lectric or Rad Power bike would serve them better. Not to mention the weight.
Yes it hard you have remove the cover of body design it inside the chassis I have that product I used it for 3 months the motor stop and I emailed and phone call the customer service they will replace the parts but I didn’t happen the customer service are poor they said just for 4 replace but it didn’t happen until waiting for it to run my ebike on road 4 days to 4 weeks but until I didn’t replacement the parts I need to run my ebike on road
Yes it hard you have remove the cover of body design it inside the chassis I have that product I used it for 3 months the motor stop and I emailed and phone call the customer service they will replace the parts but I didn’t happen the customer service are poor they said just for 4 replace but it didn’t happen until waiting for it to run my ebike on road 4 days to 4 weeks but until I didn’t replacement the parts I need to run my ebike on road
Nice to see Magura 4 piston brakes on a bike at this price level. The difference between Magura and standard two piston brakes is like hitting a wall when you stop … I’d like to see these become standard on any ebike over $2000.
They definitely have such a unique excellent looking Ebike. I would simply upgrade the pro and give it a beautiful custom paint job. A bigger battery and motor but not make the bike look ugly may be tricky! Its definitely has a solid build!
That pro model is dope 😂 it is so much better than prototype by specs looks that's screen is motorcycle like that older model is still cool but I probably wouldn't change much if I owned the older model I'm seriously thinking of getting the new pro great review as always, that orange black looks like a dirt bike you can get creative with thats the best part !
I have that product I just used it for 3 months the motor stop in the middle of the road I emailed and called the customer service we agreed that will replace the parts that it broken and the days fast bye they didn’t replace the parts and they always promised that will deliver it for 4 days it happened it 4 weeks promises the customer service are poor
I hear this with so many different ebikes companies always bad severice or bike isn't good. Crazy, not sure if it's because they produce so many and of course someone will end up with a problem. I believe Coswheel might be a better option, cheaper, a bit faster but definitely not a better build quality but really doesn't matter because they are solid.
Also, I do hope they listen to you and fix the problems as it's such a nice looking bike! To bad Leroy bikes went out of business as they looked so darn nice and all custom build! I'm on their email list so hopefully they get it together and come back! I would customize them but it will have to be flawless with some of the nicest paint jobs and customizations ever done!
There is a huge drawback to this bike which should be brought out & that is the difficulty in removing the back wheel. There is a video on UA-cam showing it. You have to dismantle the whole back of the bike to get it off it requires special tools. To me this makes this bike a no go.
That and they don’t want to disclose any parts information or how to electronically unlock the bike when the app locks you out.
Back tire not that complicated, crank puller on Amazon cost like 15 bucks and standard freewheel tool to remove flywheel. It looks harder then it is but the screws and the panel really only take like 10 15 minutes to take off. I agree would have been nice if they put the connector on the back closer to the rear rim to avoid the extra steps. I put Pirelli mandrake 90/80/16 on mine so hopefully don't have to worry about flats for a long time. I have a video on UA-cam that shows the tire on my bike. Electric bike moto/scooter tire upgrade is the title of video if you would like to check it out.
Yeah, that’s great when it’s not raining in the suburbs on a leisurely ride. But when you got’s to disassemble half the bike to change a tube (because sometimes patches just won’t stick) whilst delivering food stuff at night , or whatnot, in some ghetto you’re not familiar with? That’s another story. Don’t get me wrong, the bike rides great, but to totally dismiss the cons of it does a disservice to others trying make an expensive decision when perhaps buying a Lectric or Rad Power bike would serve them better. Not to mention the weight.
Yes it hard you have remove the cover of body design it inside the chassis
I have that product I used it for 3 months the motor stop and I emailed and phone call the customer service they will replace the parts but I didn’t happen the customer service are poor they said just for 4 replace but it didn’t happen until waiting for it to run my ebike on road 4 days to 4 weeks but until I didn’t replacement the parts I need to run my ebike on road
Yes it hard you have remove the cover of body design it inside the chassis
I have that product I used it for 3 months the motor stop and I emailed and phone call the customer service they will replace the parts but I didn’t happen the customer service are poor they said just for 4 replace but it didn’t happen until waiting for it to run my ebike on road 4 days to 4 weeks but until I didn’t replacement the parts I need to run my ebike on road
Nice to see Magura 4 piston brakes on a bike at this price level. The difference between Magura and standard two piston brakes is like hitting a wall when you stop … I’d like to see these become standard on any ebike over $2000.
Paint me stupid, but where did you find out what model calipers they are?
@@dwalter8508you can see them in the review. Magyars have a very unique look.
They definitely have such a unique excellent looking Ebike. I would simply upgrade the pro and give it a beautiful custom paint job. A bigger battery and motor but not make the bike look ugly may be tricky! Its definitely has a solid build!
@7:56 "How heavy is your girfriend?" 🤣 This is a sweet ride. Thanks for the review and laugh.
Thanks for watching! I see the connotation, that is funny :) but I intended to ask to see if the bike handled well not to joke about it...
That pro model is dope 😂 it is so much better than prototype by specs looks that's screen is motorcycle like that older model is still cool but I probably wouldn't change much if I owned the older model I'm seriously thinking of getting the new pro great review as always, that orange black looks like a dirt bike you can get creative with thats the best part !
NICE
Cyber truck of the ebike market
Love it. Please video document your mods! A1 Pro owner here-- looking forward to upgrading the bike
Coming soon!
Thanks for the review! Let's ride ⚡⚡⚡
Any time! ⚡⚡⚡
Is that you Tommy?
Thanks!
Thank you 😊 🙏
Anyone have a video or know how to adjust the front suspension ? New, mine is so soft it bottoms out on even medium size bumps .
I have that product I just used it for 3 months the motor stop in the middle of the road I emailed and called the customer service we agreed that will replace the parts that it broken and the days fast bye they didn’t replace the parts and they always promised that will deliver it for 4 days it happened it 4 weeks promises the customer service are poor
This is sad.
Whats the range on throttle only? Would highly appreciate
I dont remember but you can find that info in the full review I did on the channel.
I had the pro 1 silver
I love the silver too.
at what speed does it start ghost pedaling?
over 20mph
The pro no question.
That 40A battery
@@ElectricVehicleSpace
Of course the Pro, 40A battery, color LCD.
@plutobars7700 the lcd is not that big of a deal
For 3k I can buy a NIU
This product are not good
The customer service are poor of this company
have you get any answer from them?
I hear this with so many different ebikes companies always bad severice or bike isn't good. Crazy, not sure if it's because they produce so many and of course someone will end up with a problem. I believe Coswheel might be a better option, cheaper, a bit faster but definitely not a better build quality but really doesn't matter because they are solid.
Also, I do hope they listen to you and fix the problems as it's such a nice looking bike! To bad Leroy bikes went out of business as they looked so darn nice and all custom build! I'm on their email list so hopefully they get it together and come back! I would customize them but it will have to be flawless with some of the nicest paint jobs and customizations ever done!