Thanks for this Simon. Wasn't working at first but found my driver had gone away! Reloading the drivers allowed the upgrade to work. Much appreciated. 2.0 IS on the DJI download website for those wondering if it's there or not. Cheers!
Thanks....your video made me realize I had the Assistant but NOT the drivers....BIG HELP...lol. Afterwards, upgraded everything including the batteries.
I would like to enable CL and HL. I believe that I can use these features at times. I don't know if I need add'l software of if PT2 or other software offers the option to activate them. I'm on a Mac. Can you tell me how to get these features? Thanks. -- Rich
Thanks for the tutorial Simon. You make it very easy and I enjoy your sense of humor. Thanks for all the help. Two weeks and counting since I ordered my Rotorpixel gimbal. Happy flying Regards, Dave
Thanks Mr. Pu. I guess there isn't any reference to the addition of the Ground Control code being added yet. I could find it a handy tool on some of my assignments.
***** Hi Simon just of the topic slightly I have seen / heard about opening up the transmitter and plugging in to the hidden USB port inside and up dating the transmitter firmware is this correct or have I lost the plot !!!
***** Ps great video just up dated my firmware to 2.0 also noticed on yours and mine when I plug in the DJI and updated we had a warning tab jump up bottom RHS what's all that about
simon did you ever do a video on the stock remote dji phantom about the 2 screws on the back what are they for and how do i use them .. i seen a video the other day and the guy said turn the bottom one clockwise and it will boost your controller ? is that b.s
Thanks Simon, just carried out the upgrade part you have shown on here, seems all good thanks. The battery, it reads on the led screen at 97%, 12.46 V, 5081 mAH and then a 3, i have no clue at all? One other thing im not close to an Airport but im about 1mile from where Mr Bamford JCB, takes off in his helicopter. Regards Dave
ok hello simon, thank you for the link to the forums, others are having the same issue, DJI has yet to post the new version of the assistant software, so we are waiting for them to put their ducks in a row. just wanted to leave you a quick note, thank you very much for your prompt reply, enjoy your holiday mate, and what kind of holiday can it be without your quad? lolz, my wife wont let me take mine either .
rogeraitch Very nice, would I be correct in assuming the TX (controller) plays no part in this update? Also re - IOC I am new to this function and I think many others would like you to go through the switchery. Such things like re aligning the course lock heading in the air and the surprise you can get when homing on home lock and as you get close it goes to course lock and slews sideways ! However, I am pursuing a cautious path as you advise and really enjoying the NAZA mode.
Great video! This really helped a lot. I ordered a Phantom that gets here Thursday, does it usually come up to date with this stuff? Also how do i know if I need to update the remote controller? You got yourself a subscriber btw
hi Simon i recently bought a new phantom vision in China.Brought it back to Australia and it flys perfectly and records well.My question is if its worth updating the firmware to the latest version and is it any better to what it's got already and how can I find out what firmware it has at present..
Dear simon ,why my phantom vision 2 main controller upgrade version (latest one ) is still 1.0.8 ,,, i can not understand ??? could you please help me out ,, thank you
Thanks Simon, one other thing I've found is I set the compass up, slow green flashing lights at rear and red at front , then when I get to about 30ft they all go red and the Drone wants to land? Could this be a firmware issue? I shall by a cable on my way home later. Thanks Dave
Thank you so much. i was able to calibrate my phantom 2 v plus properly. i have a equation regarding the distance. Can exceed calibration with this? Whats the limit for the distance? again thank you.
Hello again Simon, just a quick question, just back from open fields where i flew my Dji eventually pics of the lakes near by etc. Got ready for take off, all good, slow green lights etc, 9 satellites all looked good, App said ready to fly, so powered up, the green lights turned yellow at about 12ft, i lost all control and it kept going up in the air? Tried to bring it down and it wouldn't, turned off transmitter, didn't want to come home? Panicked turned on transmitter again then all fine. Any ideas, its never happened before. regards Dave
I have the phantom 2 vision but my transmitter doesn't have any USB port and the software asked me to connect my transmitter. Any help in this area? Thanks
Hello there. Do I really have to import the default settings from the DJI website then redo the setup as its stated in that window before pressing the upgrade dialog? I did upgrade to v 4.02 and noticed all my settings were untouched, not even a stick calibration was necessary. Now, should I do as they say there or is my Phantom ready to go?
I have updated the Quad itself but have not been able to update the transmitter or the camera. The HTC One Max connects but logs of the Phantom and then to another WiFi network after a minute or so. Any ideas? Thanks!
Hello, I have just brought a DJI Phantom Vision 2, its the first one and im knew to droning. I brought it second hand and i dont know if its been updated at all, when i got the kit home i realised it didnt have a cable in the box to conect to PC. Do you know where i can buy one from please? Dave
Simon, i followed your instructions mostly but now my camera will not come up, no lights but constant beeping and i get "connect to controller" error when I go to upgrage, please help.
QUESTION please answer. Ok so about an hour ago I plugged in my phantom for the first time after getting it last month. Like you, it updated itself and the lights and sounds turned red and beeped annoyingly as it did it. When it finished, I did mot know what power cycle meant so I left it beeping. I didn't want to turn it off because originally it told me not to. So after waiting for a representative on the phone with DJI for a half hour, I hung up and turned it off. I let it cool down because the gimbal was going INSANE and was boiling hot when it was on for a half hour. Then, after switching to Naza mode and turning on all the settings like IOC and stuff, I turned off and unplugged, again. But when I tried to turn on the motors by pushing in both sticks, nothing happened. Did I screw it up??
cannot get my vision 11 to go in to course lock or home lock? in the soft ware it stays in the course lock position? and the lights do not react as they should? when i do pretended flight and go to home lock on s1 switch and turn off the radio it engines increase speed as it should? help///thanks.........
Simon, Just bought Phantom V2+ and watched your videos, re firmware upgrades. All ok but how do I upgrade the lens software, I see no reference to it on the DJI site. Can you point me in the right direction, thanks for your help.
***** Simon, Thanks for the quick reply, and I did mean the camera firmware. Saw your video on waypoints and you stated that the latest camera firmware must be installed, hence my question. Any thoughts why my RC transmitter wont connect to my mac. No problems setting up the Phantom connection and calibrating the sticks. However the manual states you can directly connect the transmitter, but after several attempts my mac/Phantom Assistant will not recognize it! Re the wine have you tried the Italian 'Pillastro' 2011, it is outstanding, thanks again.
Hi simon your videos are aways great Thanks for sharing I have a few questions when you do the updates dose it make any difference if you are in CE mode or FCC mode? i live in the UK so mine is in CE can i change to FCC I also have the dronexspert gimbal should i take it back to stock before updates then reinstall after updates? my phantom is going good at the mo not sure weather to do this ?
Hi. I only have an iMac and it looks to me like the current March update for the Phantom 2 Vision isn't available for Mac. There are two updates for PC but only an update of the PT2 Vision software for Mac. Or am I missing something? Cheers
***** Hi Simon. I've already downloaded the Assistant software for Mac. It's the updates for the controller (flight limit functions) I'm after. Are they buried within the Assistant app? Also, do you know when they'll launch the update for way point flying? Cheers
Hey Simon, do you think you can submit the v2.0 exe to a file sharing website? Many people such as myself are not that fond of v3.0 due to the new flight restrictions. Thanks
Yea mine was coming up with a err message in the right bottom of the screen something about the controller I did the transmitter update I don't have a SUB port on my controller so it had to be there phantom it self any ideas... thanks Marc
HELP! Im going away tomorrow and i flew my Phantom 2 yesterday and almost had a fly away. I need to connect it to my PC but i have tried everything i have all of the programs i have the drivers ive unistalled and reinstalled everything many times but nothing. When i plug is it it recognises theres a connection but say unknown connection. thanks *****
I just got it and first time using it. I talked to DJI support and they sent me an email on how to download and install the software in a certain order. That still did not work so I dropped it off at a local shop and will get a call tomorrow to see what has happened. Thanks for the reply
im Curious what happen if u dont upgrade the phantom ? Wil it be unstable or will it always be like it was before upgrade? well if u upgrade it wil it be more stable ? Is it like an phone upgrade or something ?
Hi Simon. Thanks for responding! I flew it today and it was awesome. I didn't go far because I don't have an fpv system and I only have one battery but it was great. I don't plan on ever using a phone app, I will instead get an external monitor fpv system. And I will update the firmware as soon as possible. Thanks again!
Nice Video but i can't seem to get the IOC tab on my advance settings. I just got my Phantom 2 Vision and have the latest 3.0 firmware. Shows no more updates but I can't get the IOC tab, and when i hit the phantom button, an error message pops up and says to connect to controller... I tried plugging directly into controller, phantom, and connected wifi.... Any suggestions??? If it already configured/installed on the new phantom 2's and there is no longer a tab? Anybody have this issue?? thanks...!
***** Awesome- thanks very much Simon for the quick reply. One more quick question if you don't mind: I thought I read on a forum somewhere that you need to update and power-cycle for each battery that you have. Is that the case? Thanks again!
Parker Harrington Sorry to bug you again, final question (I swear). So I updated and power cycled and put in the second of my three batteries. Everything is showing updated or most current version. How do I update the battery? THANKS AGAIN
i just plugged my phantom in, and the thing said firmware main controller upgrade to 3.0, i do the upgrade and it is stuck in this cycle, it keeps telling me main controller mismatch......are you having an issue similar to this? i bought it 4 days ago and it did all the updates fine, i flew it for a few days and went to recalibrate the sticks again and am stuck in this loop. any suggestions?
yes im using the assistant, but i just noticed what it said, it says use the assistant software v 3.0 to upgrade the firmware, i only see v2.0 let me show you a screen shot gyazo.com/099ab1479047840e08d66e03486151ef where is version 3.0 assistant software? have you upgraded to main controller firmware v3.0? this is what i get after the upgrade notice in the bottom when i try to go to another page it says firmware mismatch you must upgrade your main controller...ive done this 40 times its stuck in this upgrade loop. and thanks simon i appreciate your input.
i found others with the same issue on the forum you suggested, one man said this happened on the 2.0 update, the new assistant software was a few hours behind the firmware. im gonna wait till tomorrow anyways, but ive sent a flock of email to dji. its a weekend so i wont hear back tonight anyways. thanks for your help
Hi Sir. My Phantom2 Vision+ camera is not working properly. I could not view any live view during flying as the whole screen is dark. However when I click on the camera button and snap a picture and I can see the preview at the SD Card. Can you please give me a help. Thank you. Chen
+Simon Newton I asked one of the supplier and he said the wifi thingy in the dji is not working. Simon, if you can give me an email i will send you the screenshot.
my phantom 2 got disconected as i upgraded but sat on original remote breaking the usb conection, i got a new one with wheel but having no joy with binding ,, can any one help as i have reinstalled the sofware hard reset etc still no joy and itching to fly again
Hi im trying to activate IOC. DJI vision plus2 is the copter I have . From the video the controller is supposed to move the sliders in the software, Also when I click on advanced tab then "Phantom" tab at top i get error message saying plug in controller or similar.
Thanks Simon it did indeed work that way ,but I am confused as to how to set up IOC/NAza (?) wIthin assistant software, even with RC connected I click phantom tab in advanced section and it doesnt recognise. IOC will be a life saver I find it hard to orientate without when at distance.
***** "if you lose satellite reception for some reason IOC won't work to get you out of trouble." Surely no matter what mode the Phantom was in same would apply? Failsafe would kick in? Anyway Im I havent got the courage to fly it out of view yet lol keeping the copter orientated is so tricky,would be good if the app helped.
***** Hi, When downloading drivers etc. Its the connect, mc to pc via usb, better if say connect phantom to pc. A little baffling at first, then the penny dropped and it transferred the brains from phantom across, all is ok now. Every days a school day, thanks to guy's like you, that are willing to help. Thanks......
i did the upgrade but now on my smart phone the only thing i can see now is the WIFI ex thats it i cant see the camrea i cant see how much battery power the card i record on all that is grayed out ????? iv tryed just about everything i know do you know whats going on ??? thanks Marc
ok all i see is main controller,gps,receiver 5.8,p330cb and battery that is it all says it is up to date since i did that firmware yesterday thats when this happen i dont see the camrea any were???
***** yea i got it off of google play store i tryed gettig it off the DJI web site but my phone want let me install it any way i update the camrea like you said it took it it went yellow blinking to green i dont know man
When i go in to do the upgrade "as you have shown" nothing at all happens. any idea what i can do? I have the Phantom vision 2 Plus. any help would be greatly welcomed . Thank you Zack R
***** nothing at all i was trying to do the calibrations and nothing would move and i tryed to switch it into nasa mode and it was saying connect to the controller
Simon...your assumptions brings this to a dead stop....how does one find the website to download the Assistant?..Without that critical piece of information...sorry to say that your efforts are for nothing...just not usable without being able to find the website which is not mentioned anywhere
Extremely boring! You should always show the model so people can see what you are doing, specially the first time users. I didn't find this helpful at all.
Thanks for this Simon. Wasn't working at first but found my driver had gone away! Reloading the drivers allowed the upgrade to work. Much appreciated. 2.0 IS on the DJI download website for those wondering if it's there or not. Cheers!
no doubt when i get used to this one and go for a DJI 4 , i will be back on again to you! Thanks for your help Simon, brilliant :)
Thanks....your video made me realize I had the Assistant but NOT the drivers....BIG HELP...lol. Afterwards, upgraded everything including the batteries.
Perfect! I am a new Vision user and this was exactly what I was looking for.
I would like to enable CL and HL. I believe that I can use these features at times. I don't know if I need add'l software of if PT2 or other software offers the option to activate them. I'm on a Mac. Can you tell me how to get these features? Thanks. -- Rich
Ok will do, i have just ordered another battery as i thought the answer may a doomed battery, thanks Simon for your help
Excellent...just what I was waiting for. I'm on Mac, but your instructions worked fine.
keep doing it man!!! get so many info from the kitchen tabel . you are the best in youtube /thanks for your help/from sweden
Thanks for the tutorial Simon. You make it very easy and I enjoy your sense of humor. Thanks for all the help. Two weeks and counting since I ordered my Rotorpixel gimbal.
Happy flying
Regards,
Dave
Once again, a great instructional video Simon. I'm using a mac and it worked great. Thanks again.
Cheers
Thanks Mr. Pu. I guess there isn't any reference to the addition of the Ground Control code being added yet. I could find it a handy tool on some of my assignments.
***** Hi Simon just of the topic slightly I have seen / heard about opening up the transmitter and plugging in to the hidden USB port inside and up dating the transmitter firmware is this correct or have I lost the plot !!!
***** Ps great video just up dated my firmware to 2.0
also noticed on yours and mine when I plug in the DJI and updated we had a warning tab jump up bottom RHS what's all that about
Thank you for the instruction. I appreciate it greatly. Stay safe :)
thank you Simon very informative video im glad i listened and followed your steps
simon did you ever do a video on the stock remote dji phantom about the 2 screws on the back what are they for and how do i use them .. i seen a video the other day and the guy said turn the bottom one clockwise and it will boost your controller ? is that b.s
Thanks Simon, just carried out the upgrade part you have shown on here, seems all good thanks. The battery, it reads on the led screen at 97%, 12.46 V, 5081 mAH and then a 3, i have no clue at all? One other thing im not close to an Airport but im about 1mile from where Mr Bamford JCB, takes off in his helicopter.
Regards
Dave
Thanks Simon, Design capacity 5400 mAH......Full 5033 mAH.....and current 5018 mAH thats at 99% charge.
Regards
Dave
ok hello simon, thank you for the link to the forums, others are having the same issue, DJI has yet to post the new version of the assistant software, so we are waiting for them to put their ducks in a row. just wanted to leave you a quick note, thank you very much for your prompt reply, enjoy your holiday mate, and what kind of holiday can it be without your quad? lolz, my wife wont let me take mine either .
rogeraitch
Very nice, would I be correct in assuming the TX (controller) plays no part in this update? Also re - IOC I am new to this function and I think many others would like you to go through the switchery. Such things like re aligning the course lock heading in the air and the surprise you can get when homing on home lock and as you get close it goes to course lock and slews sideways ! However, I am pursuing a cautious path as you advise and really enjoying the NAZA mode.
Further to that Simon brand new fully charged battery
First class as per usual. If you have done a previous update, am I to assume that I have already extracted the necessary driver?
Great video! This really helped a lot. I ordered a Phantom that gets here Thursday, does it usually come up to date with this stuff? Also how do i know if I need to update the remote controller? You got yourself a subscriber btw
Thank you Simon. Great info. I subscribed!
***** Sir do i need to log in before i can open the firmware I have an issue every time i attempt to login … or do i need to register first?
***** Thanks much!
hi Simon i recently bought a new phantom vision in China.Brought it back to Australia and it flys perfectly and records well.My question is if its worth updating the firmware to the latest version and is it any better to what it's got already and how can I find out what firmware it has at present..
simon where is your video on the phantom 2 vision on how to get it to stop faster when you let the sticks go?? thanks jruffner
Dear simon ,why my phantom vision 2 main controller upgrade version (latest one ) is still 1.0.8 ,,, i can not understand ??? could you please help me out ,,
thank you
Thanks Simon, one other thing I've found is I set the compass up, slow green flashing lights at rear and red at front , then when I get to about 30ft they all go red and the Drone wants to land? Could this be a firmware issue? I shall by a cable on my way home later. Thanks Dave
Thank you so much. i was able to calibrate my phantom 2 v plus properly. i have a equation regarding the distance. Can exceed calibration with this? Whats the limit for the distance? again thank you.
its worth of subscribing your youtube channel!!
I have never updated software nor calibrated. Do I understand correctly that this cannot be done via an Apple product?
Hello again Simon, just a quick question, just back from open fields where i flew my Dji eventually pics of the lakes near by etc.
Got ready for take off, all good, slow green lights etc, 9 satellites all looked good, App said ready to fly, so powered up, the green lights turned yellow at about 12ft, i lost all control and it kept going up in the air? Tried to bring it down and it wouldn't, turned off transmitter, didn't want to come home? Panicked turned on transmitter again then all fine. Any ideas, its never happened before.
regards
Dave
Simon do you know why i cant download the drivers? i had no problem down loading the vision 2 software..
I have the phantom 2 vision but my transmitter doesn't have any USB port and the software asked me to connect my transmitter. Any help in this area? Thanks
Hello there. Do I really have to import the default settings from the DJI website then redo the setup as its stated in that window before pressing the upgrade dialog? I did upgrade to v 4.02 and noticed all my settings were untouched, not even a stick calibration was necessary. Now, should I do as they say there or is my Phantom ready to go?
I have updated the Quad itself but have not been able to update the transmitter or the camera. The HTC One Max connects but logs of the Phantom and then to another WiFi network after a minute or so. Any ideas? Thanks!
Hello, I have just brought a DJI Phantom Vision 2, its the first one and im knew to droning. I brought it second hand and i dont know if its been updated at all, when i got the kit home i realised it didnt have a cable in the box to conect to PC.
Do you know where i can buy one from please?
Dave
Simon, i followed your instructions mostly but now my camera will not come up, no lights but constant beeping and i get "connect to controller" error when I go to upgrage, please help.
HI Simon could you tell me why and how you have different opinions on your assistant 2.0 eg manual mode and it says naza m top right interesting
QUESTION please answer.
Ok so about an hour ago I plugged in my phantom for the first time after getting it last month. Like you, it updated itself and the lights and sounds turned red and beeped annoyingly as it did it. When it finished, I did mot know what power cycle meant so I left it beeping. I didn't want to turn it off because originally it told me not to. So after waiting for a representative on the phone with DJI for a half hour, I hung up and turned it off. I let it cool down because the gimbal was going INSANE and was boiling hot when it was on for a half hour.
Then, after switching to Naza mode and turning on all the settings like IOC and stuff, I turned off and unplugged, again. But when I tried to turn on the motors by pushing in both sticks, nothing happened. Did I screw it up??
cannot get my vision 11 to go in to course lock or home lock? in the soft ware it stays in the course lock position? and the lights do not react as they should? when i do pretended flight and go to home lock on s1 switch and turn off the radio it engines increase speed as it should? help///thanks.........
Ho Simon, i am having issues with my Drone, it tells me that i do not have an intelligent battery, can you help?
Simon, Just bought Phantom V2+ and watched your videos, re firmware upgrades. All ok but how do I upgrade the lens software, I see no reference to it on the DJI site. Can you point me in the right direction, thanks for your help.
***** Simon, Thanks for the quick reply, and I did mean the camera firmware. Saw your video on waypoints and you stated that the latest camera firmware must be installed, hence my question. Any thoughts why my RC transmitter wont connect to my mac. No problems setting up the Phantom connection and calibrating the sticks. However the manual states you can directly connect the transmitter, but after several attempts my mac/Phantom Assistant will not recognize it! Re the wine have you tried the Italian 'Pillastro' 2011, it is outstanding, thanks again.
Is the Phantom with battery or is it powered solely through the USB link?
Hi, one side of the battery is hard and tight with the grey plastic, the other side is blown out like a balloon.
Hi simon your videos are aways great Thanks for sharing I have a few questions when you do the updates dose it make any difference if you are in CE mode or FCC mode? i live in the UK so mine is in CE can i change to FCC I also have the dronexspert gimbal should i take it back to stock before updates then reinstall after updates? my phantom is going good at the mo not sure weather to do this ?
***** Ok great thanks again very helpful keep doing the videos
love the kitchen table stuff :)
I cant connect the phantom to the software
why it wont recognize it ?
Hi. I only have an iMac and it looks to me like the current March update for the Phantom 2 Vision isn't available for Mac. There are two updates for PC but only an update of the PT2 Vision software for Mac. Or am I missing something? Cheers
***** Hi Simon. I've already downloaded the Assistant software for Mac. It's the updates for the controller (flight limit functions) I'm after. Are they buried within the Assistant app? Also, do you know when they'll launch the update for way point flying? Cheers
Hey Simon, do you think you can submit the v2.0 exe to a file sharing website? Many people such as myself are not that fond of v3.0 due to the new flight restrictions.
Thanks
Awesome! i think i can wait, enjoy your holiday!
Yea mine was coming up with a err message in the right bottom of the screen something about the controller I did the transmitter update I don't have a SUB port on my controller so it had to be there phantom it self any ideas... thanks Marc
marc nichols the same time as
Hi, what if I want to go back to a older version on my RC? Im using a Phantom 2! Thanks!
Ohhh I got it, the problem is that I upgrade my Phantom 2 to the last version of the MC and RC and now I cant calibrate the compass
HELP! Im going away tomorrow and i flew my Phantom 2 yesterday and almost had a fly away. I need to connect it to my PC but i have tried everything i have all of the programs i have the drivers ive unistalled and reinstalled everything many times but nothing. When i plug is it it recognises theres a connection but say unknown connection. thanks *****
Do you have to connect the phantom or the remote to USB?
The software will not recognize my drone or RC when plugged in. I have the phantom 2. Any thoughts on how to fix?
I just got it and first time using it. I talked to DJI support and they sent me an email on how to download and install the software in a certain order. That still did not work so I dropped it off at a local shop and will get a call tomorrow to see what has happened. Thanks for the reply
i need help my drone appear the battery warnig ligth said is low but is full what can i do pleas help
im Curious what happen if u dont upgrade the phantom ? Wil it be unstable or will it always be like it was before upgrade? well if u upgrade it wil it be more stable ? Is it like an phone upgrade or something ?
Ok
Hi, I just got my Phantom 2, do I have to download firmware before my first flight? I don't have an fpv system and I only have one battery so far.
Hi Simon. Thanks for responding! I flew it today and it was awesome. I didn't go far because I don't have an fpv system and I only have one battery but it was great. I don't plan on ever using a phone app, I will instead get an external monitor fpv system. And I will update the firmware as soon as possible. Thanks again!
11 charges Simon.
I love your accent.
It was useful. I could update my DJI Phatom 2 just watching the first 3 minutes. So, thank you.
can you use any cable i lost mine
Nice Video but i can't seem to get the IOC tab on my advance settings. I just got my Phantom 2 Vision and have the latest 3.0 firmware. Shows no more updates but I can't get the IOC tab, and when i hit the phantom button, an error message pops up and says to connect to controller... I tried plugging directly into controller, phantom, and connected wifi.... Any suggestions??? If it already configured/installed on the new phantom 2's and there is no longer a tab? Anybody have this issue?? thanks...!
thanks for vid: so does the handheld remote control need to be updated too? I see there is a USB port on it.
***** Awesome- thanks very much Simon for the quick reply. One more quick question if you don't mind: I thought I read on a forum somewhere that you need to update and power-cycle for each battery that you have. Is that the case? Thanks again!
***** very helpful- totally appreciate it!
Parker Harrington Sorry to bug you again, final question (I swear). So I updated and power cycled and put in the second of my three batteries. Everything is showing updated or most current version. How do I update the battery? THANKS AGAIN
***** Yes, around Noon today- it had updates and I updated everything. But when putting in other batteries: it shows everything updated. Thanks.
i just plugged my phantom in, and the thing said firmware main controller upgrade to 3.0, i do the upgrade and it is stuck in this cycle, it keeps telling me main controller mismatch......are you having an issue similar to this? i bought it 4 days ago and it did all the updates fine, i flew it for a few days and went to recalibrate the sticks again and am stuck in this loop. any suggestions?
yes im using the assistant, but i just noticed what it said, it says use the assistant software v 3.0 to upgrade the firmware, i only see v2.0 let me show you a screen shot
gyazo.com/099ab1479047840e08d66e03486151ef
where is version 3.0 assistant software? have you upgraded to main controller firmware v3.0?
this is what i get after the upgrade notice in the bottom when i try to go to another page it says firmware mismatch you must upgrade your main controller...ive done this 40 times its stuck in this upgrade loop. and thanks simon i appreciate your input.
i found others with the same issue on the forum you suggested, one man said this happened on the 2.0 update, the new assistant software was a few hours behind the firmware. im gonna wait till tomorrow anyways, but ive sent a flock of email to dji. its a weekend so i wont hear back tonight anyways. thanks for your help
it just got posted v3.0
Hi Sir. My Phantom2 Vision+ camera is not working properly. I could not view any live view during flying as the whole screen is dark. However when I click on the camera button and snap a picture and I can see the preview at the SD Card. Can you please give me a help. Thank you. Chen
+Simon Newton Hi Simon. I have done what you mentioned previously and same thing happen.
+Simon Newton I asked one of the supplier and he said the wifi thingy in the dji is not working. Simon, if you can give me an email i will send you the screenshot.
my phantom 2 got disconected as i upgraded but sat on original remote breaking the usb conection,
i got a new one with wheel but having no joy with binding ,,
can any one help as i have reinstalled the sofware hard reset etc still no joy and itching to fly again
I downloaded drivers and DJI assitant, plugged everythting in and turned on but software is not responding to Remote control.
Hi im trying to activate IOC. DJI vision plus2 is the copter I have . From the video the controller is supposed to move the sliders in the software, Also when I click on advanced tab then "Phantom" tab at top i get error message saying plug in controller or similar.
*****
Hi yes I installed driver,I had RC plugged in not aircraft I shall try plugging in aircraft see if that makes a differnce
Thanks Simon it did indeed work that way ,but I am confused as to how to set up IOC/NAza (?) wIthin assistant software, even with RC connected I click phantom tab in advanced section and it doesnt recognise. IOC will be a life saver I find it hard to orientate without when at distance.
*****
"if you lose satellite reception for some reason IOC won't work to get you out of trouble."
Surely no matter what mode the Phantom was in same would apply? Failsafe would kick in?
Anyway Im I havent got the courage to fly it out of view yet lol keeping the copter orientated is so tricky,would be good if the app helped.
***** Good advice. Didnt know the auto home could fail to work in circumstances.Scary!!
No I got the newer vision it does not have a usb port on the controller the err message just said I needed to recalibrate
i dont remember i did the remote then power cycle and i didnt see it anymore lol i dont know..
***** i dont remember i did the remote then power cycle and i didnt see it anymore lol i dont know..
***** i looked it said i did not need to recalibrate anything it was all good i dont know man iv tryed everything
Firmware and phantom doesn't connect, tell me to connect controller, even with phantom usb plugged in......
***** Hi, When downloading drivers etc. Its the connect, mc to pc via usb, better if say connect phantom to pc. A little baffling at first, then the penny dropped and it transferred the brains from phantom across, all is ok now. Every days a school day, thanks to guy's like you, that are willing to help. Thanks......
i did the upgrade but now on my smart phone the only thing i can see now is the WIFI ex thats it i cant see the camrea i cant see how much battery power the card i record on all that is grayed out ????? iv tryed just about everything i know do you know whats going on ??? thanks Marc
ok let me try that thanks ill let you know thank you so much for helping me Simon
ok how do you do the new firmware for the camera and how do i look to see what i got hook up the drone to the computer again and check????
ok all i see is main controller,gps,receiver 5.8,p330cb and battery that is it all says it is up to date since i did that firmware yesterday thats when this happen i dont see the camrea any were???
***** yea i got it off of google play store i tryed gettig it off the DJI web site but my phone want let me install it any way i update the camrea like you said it took it it went yellow blinking to green i dont know man
my computers at home so far haven't found the device even when I have it plugged in, and I have the pt2 running on my computer Someone please help!
ahhhh, I got it, thanks!
When i go in to do the upgrade "as you have shown" nothing at all happens. any idea what i can do? I have the Phantom vision 2 Plus. any help would be greatly welcomed . Thank you Zack R
***** it shows i have version 3.6 but thats only on info but when i click on upgrade its just all blank nothing shows up
***** nothing at all i was trying to do the calibrations and nothing would move and i tryed to switch it into nasa mode and it was saying connect to the controller
***** where would i go to get the driver installed
when i go to install it its says please power on mc and connect to pc via usb. what does that mean
BobCheryl Rice thank you so much i figured it out but one other thing do you know what the s1 and s2 switched are set at in phantom mode
Simon...your assumptions brings this to a dead stop....how does one find the website to download the Assistant?..Without that critical piece of information...sorry to say that your efforts are for nothing...just not usable without being able to find the website which is not mentioned anywhere
Extremely boring! You should always show the model so people can see what you are doing, specially the first time users. I didn't find this helpful at all.