KEMI MOTO CLUB CAR PRECEDENT DELUXE LIGHT KIT REVIEW & INSTALLATION
Вставка
- Опубліковано 27 сер 2024
- KEMI MOTO Deluxe Club Car Precedent light kit review and installation. The viewer will experience the unboxing, review and installation of a Kemi Moto Deluxe Club Car Precedent light kit. I'll be showing the process from start to finish. This item was sent to me for free from Kemi Moto in exchange for an installation video. In this video, I provide my honest review being overall satisfied with the product. KEMI MOTO has no influence on my overall opinion about this product. Note: I attached the fuse block with command strips and added extra length to the wire to easily remove block for easy access, if placed in a tight spot. Below you'll find affiliate links for the same or similar items used in this video. Thanks for watching!!
KEMIMOTO Deluxe Precedent Light Kit Compatible with Club Car Precedent 2004-Up. amzn.to/49uGVNk
DC to DC Voltage Reducer. amzn.to/3TQeV0B
DaierTek 12V Fuse Block. amzn.to/3PXbOmF
GS Power 14 AWG (True American Wire Gauge) CCA Copper Clad Aluminum Primary Wire 25 ft Red & 25 ft Black. amzn.to/3UadMm1
TICONN 250Pcs Heat Shrink Wire Connectors. amzn.to/43WkKyq
Heat Gun. (For heat shrink) amzn.to/4cR2kmr
Command Black Picture Hanging Strip Mixed Pack. (For mounting voltage reducer and fuse block instead of using screws.) amzn.to/3xEDwhp
PORTER-CABLE 20V MAX Impact Driver. amzn.to/49yeQ7N
Amazon Basics 42-Piece Impact Screwdriver Bit Set. amzn.to/4aLMR5x
22 Pieces Hex Shank Drill Bit Set for Impact Driver. amzn.to/3UbFxdW
Bi-Metal Hole Saw Kit, 7-Piece. amzn.to/49uhefF
WD-40. amzn.to/43SLFuK
MCR Safety glasses. amzn.to/3VY8Ylb
Pharma-C 70% Isopropyl Alcohol Wipes. (For cleaning surfaces prior to installing taillights or command strips.) amzn.to/3VNYkNJ
Hi there and thanks for the info! Ps what was that grey wire that plugs into the factory harness for? Thank you!
Hi! I apologize for the delayed response. The grey wire goes to the cart harness. If that isn't plugged in, the lights will not work properly, or at all. Hope this answers your question. Thanks for watching!
Sounds good and thanks for your time and the video
@@kevinpaiva1358 Thanks again for watching!
I watched this video and ordered the kit. Went together fine but the horn wouldn’t work. Tried the adjustment the instructions said and it still wont work
Hi,
I apologize for the delayed response. Did you get it figured out? If not, feel free to reach out to me through email. peteshowtosreviews@gmail.com
@@peteshowtosreviews8067 no i just left it unplugged.
man. My cart has this same exact setup but can’t figure it out. It’s actually making me angry lol
I don’t have a voltage reducer but a shop pro told me you really don’t need one. Starting to think you might need one. I’ve spent hours looking at video and all my connections. Light just won’t come on.
I would add a voltage reducer just to rule out any potential issues. Send me an email with your contact info peteshowtosreviews@gmail.com if your still having issues.
I just replied to your other message contact me through email peteshowtosreviews@gmail.com
Great!
Thanks!!
Everything was good for running the wires to where they go. After that, the instructions on where and how to hook the wires up to the cart are terrible. The excuse was that he ran low on his battery. He didn’t show anything about where to hook the kit wires into the cart wires under the dash.
@@georgecruso8416 Hi, I did show where the kit wires are connected to the cart under the dash. I didn't show the process due to my "excuse". If you need assistance feel free to email me at peteshowtosreviews@gmail.com I'll be willing to walk you through that step over the phone or in an email since it isn't clear in the video. Thanks for watching!!