When you manage to remove everything thats contaminating the surface and then apply some wax, then it becomes really reflective because the surface is super flat! Very satisfying to achieve
Ottimi video con specificati i prodotti e le diluizioni utilizzate. Quanto di meglio che ho trovato online per ciò che riguarda i tutorial. Gradirei video più completi con tutti gli step del car detailing per le singole vetture. Giudizio: ottimi video!
Could you share more about why in you process you use Tea first on the wheels prior to a clean with AWC? Is it to help dissolve tar and other road contamination? If so, do you find it effective in the spray on, dwell, rinse off scenario that you are using it in your videos?
Hi, great videos. I have been watching them and reading all the comments several times. I have ordered the TEA and Vb 10L (live in Sweden) after seeing your videos. Also ordered the PW. I have the Gsf for bucket wash, the GS that I use as an APC and the PSS that I use for exterior plastic. I have a couple of questions. 1. Can I use the PSS after cleaning the engine area with GS? 2. Can I use the PSS on the grill or glossy exterior plastics. 3. Normally I use cheap tar remover that is half price compared to TEA, are there any benefits with TEA over the cheaper options Thanks.
Hello! You can use PSS on plastic trims, we use it at engine plastic and more :) I would agree that TEA is expensive, but compared to other options we have noticed that TEA is slightly more effective and use less product. But hey oil degreasers is not the product i would worry that much avout. The cheap options work great as well. A good prewash (snowfoam) with the correct ph level is way more important. Gs and carpro lift is great alternatives, but if you can get your hands on VBN you should get it!
Thank you for the video. I have an Audi E-tron as well and have been looking into the Koch-Chemie products for detailing my car so this video was very helpful. I have a few questions that as an E-tron owner you might be able to answer: 1. With a ceramic coating on the car, do you think using PW is necessary? Which washing agent is better for ceramic coated cars, GSF or NanoMagic shampoo? 2. Have you cleaned and used the MotorPlast under the hood of the car? Any tips if you have? 3. The E-trons as I’ve learned have a problem with building up brake dust over time, have you noticed less of this build up when using the Koch-chemie products to clean your wheels? Thank you again for the video and any advice.
Thank you for the feedback. 1. No, PW can ruin the coating, only use top coats or boosters that is made for coatings. We only use wax free soap on coated cars. This car was only coated with a paste wax. 2. We have not tried the MotorPlast yet, seen good feedback with it though. We only use GS diluted for enginebays / plastics. For plastic trims we use PSS. 3. Yes we have noticed less buildup, but the problem in general is the weight of electric cars. E-Tron is a beast at over 2,5 tons, so you need to expect brakedust buildup. This is not just a E-tron issue, all cars get brakedust. Hope this helps :) -Cofounder of Detailing Cars channel
Hi mate. Very nice edit and a beautiful car. KC have really good prodcts. Why did you stop making videos. They could be used as KC commercials 🙌 Looking forward to the next video 🙏
Thank you! We use a 3/8" male fitting, such as this one: detailshop.no/produkt/lansepakke-for-ava-p80/ Im not sure how you can aquire this fitting seperately though
Pleier som regel å blande ut pir så den treffer med rundt 2-4% på panelet avhengig av møkk osv, men akkurat i denne videoen så blandet jeg ca 2dl vbn og 8dl vann (vi var litt late den dagen og hadde begrensa med tid), eller 1:4 som beskrevet:) - Hilsen kompis i videoen
It lasts about a month, but usually goes off the way i wash my car. So i do apply it after every wash during winter, but not every wash during summer as i dont need as much soap
Two questions sir; after prewash with Green Star (GS), would you recommend GSF or NMS for handwash? (btw, my car has no wax or any other paint protections and i will not use wax protector as the last step) and what do you think about the MZR compared to GS as exterior prewash usage? (there is no stronger alkaline cleaner than these two in my country)
Hello! MZR is mainly used for heavy interior cleaning. I would rather use GreenStar as a prewash, it is designed as both APC and alkaline use. If you do not have any wax on your car, magic nano shampoo could be a nice little add-on to your paint. It does not sheet og bead like crazy, but you do achieve some hydrofobics! We mainly use GSF as bucketwash because our cars typically have ceramic coatings / other waxes (and we typically finish with PW, not on coated cars though).
As it is PH-neutral, it does not have much cleaningpower. We use it only after prewash to lubricate the surface to minimize friction when cleaning with a washmitt :)
Nice! I’m about to try this ProtectorWax. Have you find it be ok using on the glass? And how long do you let it dwell before rinsing off? P.S. what’s the name of the song?
You will love PW! Yes, it works fine on glass, the only downside is on the front glass you may experience a small film when using your wipers. Not really an issue, but this is a common issue when applying these type of products on the front windshield.. We usually let it sit for a couple of minutes top, when the foam turns to beads we start to rinse off. You could probably just rinse it off right away. Just make sure to rinse the car very well after applying PW! Hope this helps:)
Teerwasche a is mostly safe on paint. You should use Teerwasche a with care on both plastic and rubber surfaces. They recommend not using it on rubber trims etc, because it could dry out the rubber, making it mold.
We usually let it sit until you can see the white layer turn into droplets and peel off. That is probably a minute or two. I am not certain if thats the correct way, but it works fine and the wax does pearl like it should :)
Good morning sirs, what pressure washer do you use? It appears to be very quiet! I am currently looking to replace my old pressure washer because I noticed that everytime I was my car that same night my neighbours throw rocks at my window so I assume that it’s because I make too much noise. Anyways thank you, sirs.
We use a norwegian brand called AVA, the model is p80. I would definetly not call it noisy, the water being ejected and hitting the car is probably the loudest sound, but that would be the same for any pressurewasher of similare power (probably). Hope you find a solution! Sounds like you might have some evil neighbours!
@@matejcorba5035 absoultely! its not a long lasting wax, but it keeps your car protected between each wash. strong soap will dissolve it. KC products in general are incredibly good and a lot of value for your money, thats why we have switched to only practically only use KC
Woah, the final results surprised me by its shininess. Almost like chrome coating... looks amazing. That is one happy Audi!
When you manage to remove everything thats contaminating the surface and then apply some wax, then it becomes really reflective because the surface is super flat! Very satisfying to achieve
Ottimi video con specificati i prodotti e le diluizioni utilizzate. Quanto di meglio che ho trovato online per ciò che riguarda i tutorial. Gradirei video più completi con tutti gli step del car detailing per le singole vetture. Giudizio: ottimi video!
Grazie!
Agree with you. Best videos.
Such determination, such quality wash!
Please do more videos I love this brand, real shame only a handful of things come to my market.
New video out tomorrow! Testing some different products this time
@FsAviX, Hello, would you like to review the new MJJC foam cannon pro? Thanks.
That could be fun! I will have to wait until summer comes, ill send you a message when i got time!
Could you share more about why in you process you use Tea first on the wheels prior to a clean with AWC? Is it to help dissolve tar and other road contamination? If so, do you find it effective in the spray on, dwell, rinse off scenario that you are using it in your videos?
Hi, great videos. I have been watching them and reading all the comments several times. I have ordered the TEA and Vb 10L (live in Sweden) after seeing your videos. Also ordered the PW. I have the Gsf for bucket wash, the GS that I use as an APC and the PSS that I use for exterior plastic. I have a couple of questions.
1. Can I use the PSS after cleaning the engine area with GS?
2. Can I use the PSS on the grill or glossy exterior plastics.
3. Normally I use cheap tar remover that is half price compared to TEA, are there any benefits with TEA over the cheaper options
Thanks.
Hello! You can use PSS on plastic trims, we use it at engine plastic and more :) I would agree that TEA is expensive, but compared to other options we have noticed that TEA is slightly more effective and use less product. But hey oil degreasers is not the product i would worry that much avout. The cheap options work great as well. A good prewash (snowfoam) with the correct ph level is way more important. Gs and carpro lift is great alternatives, but if you can get your hands on VBN you should get it!
Car pro or koch chemie? Who has better car shampoos?
Can´t really give you an honest opinion. We have never used car pro shampoo before.
blandingsforhold på Vorreiniger B? satt du helt på Pluss, Minus eller i midten? PF22.2 ( blandeventil )
Thank you for the video. I have an Audi E-tron as well and have been looking into the Koch-Chemie products for detailing my car so this video was very helpful. I have a few questions that as an E-tron owner you might be able to answer:
1. With a ceramic coating on the car, do you think using PW is necessary? Which washing agent is better for ceramic coated cars, GSF or NanoMagic shampoo?
2. Have you cleaned and used the MotorPlast under the hood of the car? Any tips if you have?
3. The E-trons as I’ve learned have a problem with building up brake dust over time, have you noticed less of this build up when using the Koch-chemie products to clean your wheels?
Thank you again for the video and any advice.
Thank you for the feedback.
1. No, PW can ruin the coating, only use top coats or boosters that is made for coatings. We only use wax free soap on coated cars. This car was only coated with a paste wax.
2. We have not tried the MotorPlast yet, seen good feedback with it though. We only use GS diluted for enginebays / plastics. For plastic trims we use PSS.
3. Yes we have noticed less buildup, but the problem in general is the weight of electric cars. E-Tron is a beast at over 2,5 tons, so you need to expect brakedust buildup. This is not just a E-tron issue, all cars get brakedust.
Hope this helps :)
-Cofounder of Detailing Cars channel
@@jonasrikter8280 thank you for the response and helpful information.
Hi mate. Very nice edit and a beautiful car. KC have really good prodcts. Why did you stop making videos. They could be used as KC commercials 🙌 Looking forward to the next video 🙏
Thank you! I havnt had time or the chance to make a diffrent and more original video, but i will hopefully make one soon 😄
@@DetailingCars Do it simple. A litle goes a long way 😉
@@bjarnestrand-henriksen New video out tomorrow!:)
@@DetailingCars Awsome! 🙌 Looking forward to it!
Next Project is my Audi A6 Competition :D xD ^^
Yeees
Hi, great job 😁. Can I ask what fittings you have used to connect the Suttner gun to the AVA pressure washer, I’m trying to figure out the same thing?
Thank you!
We use a 3/8" male fitting, such as this one:
detailshop.no/produkt/lansepakke-for-ava-p80/
Im not sure how you can aquire this fitting seperately though
Do you have a dedicated wash bay? Is there any issue with the neighbors while washing your car in the parking lot or everyone does same?
Private garage with designated washbay
@@jonasrikter8280 That sounds great!
Veldig fin video 👌 Blander du Vbn 1:4 I skumkanonen, eller blander du den slik at det som kommer ut av skumkanonen er 1:4?
Pleier som regel å blande ut pir så den treffer med rundt 2-4% på panelet avhengig av møkk osv, men akkurat i denne videoen så blandet jeg ca 2dl vbn og 8dl vann (vi var litt late den dagen og hadde begrensa med tid), eller 1:4 som beskrevet:) - Hilsen kompis i videoen
Good job. Can i ask you? how long last protection wax? Need to be apply every wash? 14-30 days. Thanks :)
It lasts about a month, but usually goes off the way i wash my car. So i do apply it after every wash during winter, but not every wash during summer as i dont need as much soap
Two questions sir; after prewash with Green Star (GS), would you recommend GSF or NMS for handwash? (btw, my car has no wax or any other paint protections and i will not use wax protector as the last step)
and what do you think about the MZR compared to GS as exterior prewash usage? (there is no stronger alkaline cleaner than these two in my country)
Hello! MZR is mainly used for heavy interior cleaning. I would rather use GreenStar as a prewash, it is designed as both APC and alkaline use. If you do not have any wax on your car, magic nano shampoo could be a nice little add-on to your paint. It does not sheet og bead like crazy, but you do achieve some hydrofobics! We mainly use GSF as bucketwash because our cars typically have ceramic coatings / other waxes (and we typically finish with PW, not on coated cars though).
Forgot to mention, both GSF and NMS smell amazing! (GSF smells like Cherry, and NMS smells like sweet banana)
@@jonasrikter8280 thank you sir, appreciated.
Do you ever mix GSF and GS for a foam prewash? Is it a good substitute for Vbn or Active Foam for a less dirty car?
As it is PH-neutral, it does not have much cleaningpower. We use it only after prewash to lubricate the surface to minimize friction when cleaning with a washmitt :)
Nice! I’m about to try this ProtectorWax. Have you find it be ok using on the glass? And how long do you let it dwell before rinsing off?
P.S. what’s the name of the song?
You will love PW! Yes, it works fine on glass, the only downside is on the front glass you may experience a small film when using your wipers. Not really an issue, but this is a common issue when applying these type of products on the front windshield.. We usually let it sit for a couple of minutes top, when the foam turns to beads we start to rinse off. You could probably just rinse it off right away. Just make sure to rinse the car very well after applying PW! Hope this helps:)
@@jonasrikter8280 ok thanks
Nice video. Is Teerwasche safe to use on unpainted plastics? Thanks.
Teerwasche a is mostly safe on paint. You should use Teerwasche a with care on both plastic and rubber surfaces. They recommend not using it on rubber trims etc, because it could dry out the rubber, making it mold.
@@jonasrikter8280 Thank you very much!
Do you let Protectorwax dwell on the car or pressure wash it off immediately?
We usually let it sit until you can see the white layer turn into droplets and peel off. That is probably a minute or two.
I am not certain if thats the correct way, but it works fine and the wax does pearl like it should :)
Good morning sirs, what pressure washer do you use? It appears to be very quiet!
I am currently looking to replace my old pressure washer because I noticed that everytime I was my car that same night my neighbours throw rocks at my window so I assume that it’s because I make too much noise.
Anyways thank you, sirs.
We use a norwegian brand called AVA, the model is p80. I would definetly not call it noisy, the water being ejected and hitting the car is probably the loudest sound, but that would be the same for any pressurewasher of similare power (probably).
Hope you find a solution!
Sounds like you might have some evil neighbours!
so according to your dillution ratio of Protector wax. You used 5 ml in 1 liter of water?
Yes that would be correct :)
@@DetailingCars So i can protect my entire car with 5 ml . I heard that KC Protector wax is amazing. But man that is 🤯🤯
@@matejcorba5035 absoultely! its not a long lasting wax, but it keeps your car protected between each wash. strong soap will dissolve it. KC products in general are incredibly good and a lot of value for your money, thats why we have switched to only practically only use KC
W
You are not profi with wheel cleaning