Unlocking FlyWing H1 Lite GPS RC Helicopters Hidden Flight Modes
Вставка
- Опубліковано 30 вер 2024
- In this informative step by step video tutorial, Discover how to activate the hidden and secret flight mode of Flywing H1 Lite GPS RC Helicopters flight controller. Activate these exclusive features to unlock new ATT and 6G Flight modes and experience improved flight performance and possibilities. Enhance your flying experience.
Best H1 Scale Heli Settings: bit.ly/h1scale...
EdgeTx Heli Models: bit.ly/edgetx1...
Best Flywing RC Helicopters
FW450 V3: bit.ly/fwrc450v3
Huey UH1 V4: bit.ly/fwrcuh1v4
Airwolf: bit.ly/fwrcair...
FW200: bit.ly/fwrc200
Scale Heli Parts: bit.ly/fwscale...
FW450 V3 Parts: bit.ly/fwrc450...
H1 Flight Controller: bit.ly/fwrch1
Best Radio Controllers:
RadioMaster TX16s: bit.ly/3FBQMnt
FrSky X20S: bit.ly/frskyx20s
My Digital Products: shopcreate.gum...
My 3D models: bit.ly/alis3dwork
Buy Me a Coffee: bit.ly/alicoffee
Join Channel: bit.ly/joinali...
My website: createc.store
#flywing #helicopter #rc #flightmode #att
Setup Tip. Set Flight mode Switch Up Value 2000 (RTH), Mid Value 1500 (GPS) and Down 3D to 1400 (Will set to ATT Mode) so you will have Home, GPS and ATT Mode. Any time you make mistake in ATT mode you can switch to GPS Immediately. Make sure to take off in GPS Mode though after GPS locks all satellites and shows solid green LED.
Thanks for sharing 🙏🙏
Very much appreciated! Especially the idea of being sure to get the GPS green light if switching between GPS and ATT.
You're a genius! I can't wait to try it. Question, what mode is your tx and which stick is used to arm motors if mode 2 it looks like throttle only, down and left? Please confirm cheers Ali
@@mauricespierings6951 mode 2 and yes its right, only throttle down left
Thanks for sharing video! Question, when I put into ATT mode, the heli wants to drop and I need to give it more throttle (collective) to stay in the air. Is there a setting that I can change that will let the heli maintain altitude? In your video you are in ATT mode and not touching the throttle. Thank you.
Great video Ali! Your tips come in handy and make the FW helis more enjoyable to fly!
Absolutely! and thank you :)
Hello Alishanmao, sorry to insist with the problem on my FW450 V2 abou "ATT Mode". I did what my Friend said about the Calibration of the Sticks and Switches on the radio ad H1 Program and the problem persists. when turning from GPS Mode to ATT Mode the Heli drops down, doi not stay in altitude. I don´t know if it is because one think that i remenber now, it means, my Friend always speak abou "H1 Version 1.9" and i'm recently using "Version 2.0" that Fly Qing says: ««H1 V2.0
New 3D security mode(Not 3D rescue,Just to prevent accidental contact with 3D during flight):
1、This function has an adjustable height parameter, which defaults to 8 meters.
2、When this function is turned on, when the helicopter is above 8 meters, it can switch to 3D mode for flight.
3、When the helicopter is below 8 meters, the 3D switch is invalid and the helicopter cannot switch from GPS mode to 3D mode.
4、When flying in 3D mode, the helicopter will automatically switch from 3D mode to GPS mode and hover when it falls from a height above 8 meters to below 8 meters. If you need to fly in 3D again, you need to raise the helicopter to over 8 meters, switch the 3D switch back to GPS, and then switch back to 3D mode.
5、Please adjust the height parameters according to the weight and descent speed of the helicopter. If the helicopter falls too fast
and the height set is not enough to make the helicopter brake and hover, there is still a risk of crash.
Can You please tell me something about thisi sid? Thamk You.
Hi Ali can you tell me why my v3 450 just went into the ground I couldn’t stop it and was in gps
I need a trick like this for Flywing FW200 helicopter. Ali, is Att Mode possible for the FW200?
there is a smart aerobatics mode which is possibly the similar thing.
Too bad, not complaining, The dummy pilot figure that should be included, Stringfellow Hawke doesn't have firepower to play with? Cannons and rockets. Fun looking whirlybirds.
Thanks for tips
My Huey is stuck at solid green LED - I cant unlock it to fly.
Sticks down and to outside does nothing. Calibrating Tx does nothing.
Using FS-i6S just like in this video.
What do iI do?
I need to fly!
How to get flashing green LED?
make sure motor arm switch is on disarm, now hold the rudder stick down and right for 3 seconds. your solid led will blink, if not, hold it down and left and see solid green will blink, now flip the motor arm switch and it will start
I love ❤️ this. I'm disabled and fly one handed, ÿes I fly with one ha , pinky on rudder index on cyclic.
you can do it :)
you have any info on the flywing fw450l v1.5 buddy?
non buddy
As Salam Alaykum warahmatullahi wabarakatul. I am interested in coming to the UAE
Always welcome. come to UAE. if you have time you can meet me. we can have a good talk about rc and business.
Outstanding! I have been waiting for this. I plan to use it.
I have the same question as Eric. Can the ATT mode be assigned to the 3D switch rather than the GPS switch? I'd like to have Home/GPS/ATT modes if at all possible.
i also thought having to have RTH, GPS and ATT was good. need to experiment with it. setting the 3d switch value to 1400 should switch it to ATT.
Question is there a way to keep GPS assigned to the GPS toggle switch and just change the 3d toggle position to ATT mode ,
this way you could fly in ATT mode and if you get in trouble immediately switch back to GPS on the fly.
I did it. Just switch the 3D switch instead of the GPS switch to ATT mode.
@@ronaldcobbs5260 Excellent thanks for the info :)
thats what I thought, 3d mode switch value can be set to 1400 so it becomes ATT mode.
@@alishanmao if i fly on att mode and the battery is too low is it come directly to the return home
Very nice rc heli sir..thanks for sharing
Thanks for watching
what differnece between 6G and 3D ?
auto level in 6g, full manual in 3D
Hello all, in my radio the value are displayed by presents from -100% to 100% how do I set the values to use GPS/ATT/6G positions
which radio?
Jumper T8SG it use Deviation firmware@@alishanmao
Jumper T8sg with Deviation firmware
Hi any answer how to set redio with 100% scal to ATTl
Another good tutorial Ali.
Thank you
hi hun iv got a 450 l 2.5 i set it to att mode but when i flick the switch it drops like a brick have to go back to gps mode ddo i need to set other settings all so many thanks
sorry i set it up on the 3d one so home gps att yes its flashing red
If you set it right it won't drop. It drops only in 3D mode
@@alishanmao hi hun i only set it on the transmitter ie 1400 it flashers red when in att do you have to put more up in on transmitter or should it hold that hight i set thiss on the 3d on transmitter so do you have to set any thing in the program its self like i say iv set this on the 3d one so it does not go in 3d mode
😂 this is cool !
Thanks buddy 👍😀
I believe 6g is 1300, not 1200. that's what i'm using and may be why your 6g feels and looks like 3d mode ;)
I will try 1300 because flywing said 1200 is 6G
@@alishanmao Luo peng told me 1300. only one way to find out ;)
@@GaelVeerasamy I have tried it. only when you use 1200 the LED will be magenta. With 1300 the LED ist RED blinking.
@@MrBADpilot but how was the flight?
@@GaelVeerasamy So 6G is 1300 or 1200?
Great information. Step up with stabilization mode while learning skills.
Thanks and have fun buddy
Thank you so much Ali you're a bloody LEGEND mate. I've been wondering how on Earth to flip from GPS to 3D under the factory TX Values set. Thank you again. The Flywing Instruction booklet doesn't give up any information to this at all!
you are always welcome. Join my supporters group if you like www.buymeacoffee.com/alishanmao
Hello, do you have to recalibrate on the H1 program once you put in 1400 on the TX?
You have to calibrate sticks and switches on radio and then calibrate sticks again using assist program, so you have to do it twice each time you make changes to radio values
@@alishanmao awesome thank you for the reply. Do you have videos of this already?
@@kylekranz38 some of my video tutorials probably have this. you have to watch them all videos and find the section. thank you
@alishanmao I just sent it without calibration, worked perfect. Very fun mode to fly in.
is it possible to set the flight mode in Flywing RC Helicopter , Home -2000, GPS -1500 and (ATT - 1400 ) instead of 3D mode -1000 value in my transmitter. does it works ?
based on the values you can set any mode of your choice
Great 'hack' Mr. Ali. Does the H1 use something similar to the SAFE function in Spektrum flight controllers? I mean is there a 'flight envelope' in stability mode (GPS)? So you can bank only by 45 deg or so? I haven't tried yet. Might also apply to '1400' ATT mode, or?
yes, in GPS and ATT mode you can't bank more than the set angles.
Hello Ali, compliment for revealing us this secret, I've not tested it yet, but I have a rapid question, my FW450 is perfect in GPS mode, but only in downside mode, when I switch invert, it keep the postion (not as well as not inverted) but not the altitude anymore, I must give big corection on the collective to keep at a reasonable altitude. Have you never experienced this problem on any flywing heli ? All of the other functions of h1 seems to be perfectly working. Thanks
you can calibrate the sticks on your radio, then calibrate the sticks again using assist v1.9, make sure h1 is properly connected and read. after the successful calibration, it should hold its altitude. if after this its still doing it, you have to do some swash leveling and pitch setup that is zero (mid) max postive and max negative properly
What happens when you switch from ATT mode to GPS or RTH mode during flight?
if you have set RTH, GPS and ATT, you can switch between any of these modes without issues and they will work. but I am not sure if you set RTH, ATT and 3D, if RTH works or not. i have to test it. and then make another video
How do I do this trick with my bell 206 and my Radiomaster tx16s?
follow my tutorials ua-cam.com/video/-ttluCRwlss/v-deo.html
on my bell 206 the ATT mode (1400) the helicopter dont lock altitude ?? why
try 1300 :)
Good job. Any hack of binding or mixing a switch to control the head speed ?
Not that I know of
Hi Ali. Will this flight mode ATT work on the H1 heli or just the Lite? Thanks for all you do!!!
Yes it will
Can you give me a link please to buy a GPS AirWolf with calibration that doesn't need a laptop
There is no link for GPS Airwolf, you will have to buy this helicopter first: FW450 V3: bit.ly/3YT8qeF
then buy Airwolf Shell here: Airwolf Shell: bit.ly/3kinLXt
Convert your FW450 V3 to airwolf yourself. watch this video: ua-cam.com/video/Mx40dtvcpmA/v-deo.html
Hello, thank you again!
I have a question: can one still use the " automatic" figures Circle and Eight?
yes
Thanks Ali, works great!
Using a Horus X12S Tx I created a 4 position switch being able to use now all 4 flight modes.
Fantastic! yup that is possible too to use all 4 or in fact all 5 of these modes :D
Great!! Is this trick possible with version 2 of the FW450L?
yes
Flying like this now. Only problem I have now is copter shakes bad at about mid spool up and spool down. I balanced both blades same center separately and together on a prop balancer, loosened and tightened the blades but still does it. Can’t tell if the shaft is bent but no crashes. Flies easy though. Thanks 😊
check mounting screws inside the fuselage for the whole heli frame
Great job Ali! Can I Set it up with my DX18?
if spectrum has SBUS receivers? yes you can
E invece volare in 3D oppure in ATT...quale è la differenza?..grazie
ATT mode is for those who do not want GPS, want better flight performance and or attend the flight test.
Do I understand correctly that in ATT mode the barometer is active and holds the altitude and the attitude sensor keeps the helicopter level? or is the barometer also deactivated?
you are right. only GPS and auto flight modes are disabled.
Hiya, I replaced 3D mode with Atti mode, however I noticed yesterday during testing while flying up and down the runway there was quite a bit of tail oscillation. Is this normal? Can it be programmed out, if so will it effect GPS mode?
Thanks
reduce the tail gains and try
@@alishanmao yes, I assumed, but my question is, if I do well it affect gps mode ?
First, MANY THANKS for Your VIDEOS, ALL OF THEM. About ATT Mode on FW450, that i learned WITH YOU, i tried and happen the followig: i was flying in GPS Mode and when i turned tp ATT Mode with the Throttle Stick on its normal position (on the middle) the heli went down immediately without maintaining the "hold" position as we can see on this video. Is it normal? Thank You again for your invaluable HELP.
I forgot to say You that i did as you said: - "Setup Tip. Set Flight mode Switch Up Value 2000 (RTH), Mid Value 1500 (GPS) and Down 3D to 1400 (Will set to ATT Mode)" that the result is as you also said:- "Any time you make mistake in ATT mode you can switch to GPS Immediately.", that not happened to me as i said before.
The same that happened with "@piah167 = when I put into ATT mode, the heli wants to drop and I need to give it more throttle (collective) to stay in the air" and also with "
@labaumi9878 = when I change to 1400 ATT I have no pitch control". Note i recheck the Values, i recalibrated the sticks on the radio first and connecting H2 on the computer. . and the same thing happening: when i change from GPS Mode to ATT Mode the Heli dropped down.
Thank you very much for your attention and... PATIENCE 🙂
after setting new values in radio for flight modes. calibrate radio, then connect H1 to computer and calibrate sticks again using Assist program. only then H1 will know if new values work or else it will keep switching to 3d and drop heli as pitches are different
@@alishanmao Thank You for Your attention. Best Regards from MADEIRA Island - Portugal
So i just changed my 3D mode to ATT (1400) on my huey . ive been flying in gps for several months now and am kind ig board with all gps mode can do. Im hoping everything goes ok in att mode. Im nervous about crashing but think ill be ok. If it goes well ,ill change it for my airwolf as well. Thank you for all the info and detailed instruction Alishanmao. I feel alittle more confident now.
ATT Mode is like GPS mode minus the position hold. you get more angle of attack, more speed but its still absolutely stable and auto levels fast once you leave stick
@@alishanmao Great comment and valuable info
I just successfully set the 3D switch into the ATT mode. I used the same method Ali taught here. It flies great. 😅
Thanks Ali
Fantastic! have fun buddy. how did you find the ATT mode compared to GPS mode
I really like ATT mode when I want more practice in control of the heli but still want blade leveling.
Ciao Alì...sempre belli i tuoi video..non conosco l'inglese e faccio fatica a seguire le tue spiegazioni...ma vorrei chiederti una cosa...ma volare in ATT cosa significa...che differenza c'è tra volo in ATT e VOLO GPS GRAZIE ALESSANDRO
in GPS mode it will hold its position and altitude. in ATT mode it will be better flight performance but it won't hold Position when you leave the sticks and all auto flight modes are disabled
Grazie....ancora una domanda....differenza fra ATT mode e 3D MODE?
Is there still the INVERSE Funktion wenn I fly in ATT Mode?
I do not think so. All Auto features are disabled in ATT Mode
Great vid as always. Using a Radiomaster TX16S, what values would you need to change on that radio to achieve the same outcome?
same values on flight mode channel
@@alishanmao what setting/screen are these on man?
Excellent as usual, Ali. Very informative, clear and easy to understand.
So, conclusion is, in “ATT” mode, altitude is held as well as “attitude”? Only thing lost is position hold? Correct?
Thanks again,
“Huey” Steve
no position hold, and no auto flight modes. :) but its just more awesome in ATT mode
@@alishanmao
Not in “invert”?
@@stevetillson3268 no auto invert i believe
Has anybody attempted "invert" like on 450L. ???
Ali thank you 🙏
You are always welcome
Parabéns você é um gênio muito bom da pra fazer com o fw450?
Thanks buddy 👍😀
@@alishanmao serve pro fw450 ?
Thanks for sharing 🙏🙏
My pleasure
Why do they have a hidden mode ?
not anymore
keep up the good work Ali
Thanks buddy 👍😀
tks much made that easy
always welcome
That was interesting.
it sure is
Hi Ali is possible to set in futaba radio thanks
yes you can
@@alishanmao Thanks for the interpreting.
great Job Ali !!
Thanks buddy 👍😀
Is this procedure the same if u in the U.S. ?
yes
Does it come on gps mode from the factory so I can just charge the battery and fly?
Has any1 tried ATT mode using H1 Heli?
Te acompanho a anos. Parabens
Big thanks buddy :)
3d is............................... 6G Ali
LOL can't be. something is missing there
@@alishanmao lol - really? What is missing?? - 6G is referring to the 6 axis' of Gyroscopic (6G) rotation - which is the 6 degrees of rotation (X Y & Z right side up and upside down) otherwise known as 3D. ;-) Come on pal, you know that. xx luv you.
@@HeliShed maybe its 6G without Auto level
@@alishanmao the same Ali