@SpecBench I kind of like the stock switches, do you recommend I just case swap, tape mod, lube the switches + stabilizers a bit more? Is there any cases other than the tofu redux you would recommend? I've heard some stuff about drunkdeer having some cases, but im not sure..
@@Convexly yeah i think the stock switches are fine, i think if you case swap, tape modde lube switches and stabs itlll be fine! im not too sure about cases! ive seen people use drunkdeer for the mad68r
Nice clack. Only bad thing about most HE keyboard is how most of them sounds hollow, could be because of how the switches were designed for HE? But overall it's great!
@@itoasteds I get what you mean! The more I think about it the worse my old wooting seemed to sound lmao, ( that was with stock switches I think ) not sure. But thank you!
@ I asked a seller at where i live and he said u can put the gat to mad60 but cannot use rapid trigger, cuz the pcb of mad60 is not made to compatible with gat, my version is 1k and i rly want to try gat on my board
@SpecBench the original switch is rly fine except the wobbles of it. i've tried atk switch G, TTC Kom in made68 pro and this "axis pro" and i cant even tell any difference between these switch, the only thing i can tell the sound of it 🤣
@@capnnutty806 a Hall effect keyboard is also known as a magnetic switch keyboard, it uses sensors and magnets to detect the key presses, instead of physical connection. When you see keyboards with rapid trigger and adjust actuation , these are Hall effect keyboards ( HE)
13:37 it is a common problem for this keyboard. Very cheap plate) I've already bent 1 switch leg and some switches are not working good, they think, they are pressed by 0.21 mm)
@@egbad yeah I did see a video of a guy who struggled so much with taking them out when modding That he had to remove the backplate so he had access to the rear of the pcb lmao
I'm planning to buy this keyboard and change the case to aluminum one but it will cost a little bit and then i found a keyboard with aluminum case itself and it's gonna be a lot cheaper hehe
@SpecBench right? Hahahaha and the kb i just saw with aluminum case is only £55, the brand itself is still not revealing or have a video of the actual model but someone is selling it so maybe I'll try to pre order one.
@SpecBench i got it like about a month ago now and it has been acting up since last week :/ i have to recalibrate the keys every day, the W key is also very sticky i’m guessing because of the factory lubing… idk what ima do with it now xD
I already switched out the keycaps with ones I’ve been wanting for a while :) check community post and let me know which ones you prefer 🫡
such a good upgrade to the mad 60he I've seen yet W vid bro!
Ngl I still hear that resonance from the spacebar, maybe putting foam on the keycap would help
plate material issue and cheap keycap issue
like as in hollowness?
@@hateqwq what do you lookk for in keycaps man? what determines if they're cheap?
its the table / desk causing it to sound like that
W video,I’m buying this keyboard and wondering if it has a setting that makes it so soon as I lift my finger off the key stops.
rapid trigger yes it has
yeah as the other comment says, it has rapid trigger :)
I can't wait for my keyboard to arrive and mod it
W
Same. Going to max out silence, add stone textured keycaps & swap cases ofc (maybe stained wood).
@ oooh sounds sick!
W video bro, just bought it and was thinking about modding it when it arrives
Deffo worth it. Feels so much more premium now!
@SpecBench I kind of like the stock switches, do you recommend I just case swap, tape mod, lube the switches + stabilizers a bit more? Is there any cases other than the tofu redux you would recommend? I've heard some stuff about drunkdeer having some cases, but im not sure..
@@Convexly yeah i think the stock switches are fine, i think if you case swap, tape modde lube switches and stabs itlll be fine! im not too sure about cases! ive seen people use drunkdeer for the mad68r
@SpecBenchalright, thanks
I like the sound of all 3 keyboards
@@kxtsu6459 :) same
i have pc plate compatible with it from rk61 just waiting for mine to arrive so i can mod the hell out of it too
do you think the iqunix ez60 pcb would fit in this if i made a hole for the usb? i dont like the iqunix ez60 case at all
I’m not sure man. So can’t give you an answer. Have you tried googling compatibility? Or theirs Reddit forums for kb questions
Nice clack. Only bad thing about most HE keyboard is how most of them sounds hollow, could be because of how the switches were designed for HE? But overall it's great!
@@itoasteds I get what you mean! The more I think about it the worse my old wooting seemed to sound lmao, ( that was with stock switches I think ) not sure. But thank you!
Bro, mad60he the same with wooting 60he, so u could buy full set of custom foam for wooting for about 30 euro and put it in her
@@arximedus the foam I purchased is decent enough and much cheaper than spending an additional £30 :)
@SpecBench Yes, I fully agree with you, I just mentioned it because it’s a complete set of 5 layers, and most importantly, they are of good quality ;)
imagine with pc plate this will sound heavenly
the board itself does not compatible with gat jade, are there any problems abt rapid trigger with ur unit?
@@miraiie2540 0 so far, I thought this was a clone of the wooting and therefor they would be fine?
@ I asked a seller at where i live and he said u can put the gat to mad60 but cannot use rapid trigger, cuz the pcb of mad60 is not made to compatible with gat, my version is 1k and i rly want to try gat on my board
Man I’ve just tried it on and off and 100% it works. It felt horrible with it off and very unresponsive
@SpecBench the original switch is rly fine except the wobbles of it. i've tried atk switch G, TTC Kom in made68 pro and this "axis pro" and i cant even tell any difference between these switch, the only thing i can tell the sound of it 🤣
amazing video
Thank you very much :)
yo quick question. Ive ordered this keeb, does it have the magic fn function? Like the caps lock acting as the fn key?
@@strikxrr. urmm I’m not entirely sure about that but it does have an FN key at the bottom right so
@SpecBench okay thanks bro
hi don't really know much about keyboards. what's a hall effect keyboard?
@@capnnutty806 a Hall effect keyboard is also known as a magnetic switch keyboard, it uses sensors and magnets to detect the key presses, instead of physical connection. When you see keyboards with rapid trigger and adjust actuation , these are Hall effect keyboards ( HE)
@SpecBench thank you so much
13:37 it is a common problem for this keyboard. Very cheap plate) I've already bent 1 switch leg and some switches are not working good, they think, they are pressed by 0.21 mm)
@@egbad yeah I did see a video of a guy who struggled so much with taking them out when modding That he had to remove the backplate so he had access to the rear of the pcb lmao
Whats ur cable?
@@ih80n “XINMENG C01 Coiled Keyboard Cable “ from Amazon
I'm planning to buy this keyboard and change the case to aluminum one but it will cost a little bit and then i found a keyboard with aluminum case itself and it's gonna be a lot cheaper hehe
@@Amutomoto W, yeah this tofu case with brass bar was like £80 ish so kinda expensive really lmao
@SpecBench right? Hahahaha and the kb i just saw with aluminum case is only £55, the brand itself is still not revealing or have a video of the actual model but someone is selling it so maybe I'll try to pre order one.
Does it have a software to configure rapid trigger and stuff?
@@Kimizuky yeah it’s a web based software. Simple to use as well.
i just put some clear keycaps on my mad 68he R and it's good to go 🗿
lovely!
how long did shipping take?
I think I explained it in the video? Ordered on 14th , came 20th. Expected delivery was 23rd -28th
damn it was looking so good until the caps were put on
@@chaseticas6331 I like these keycaps. Look better on a 75% kb tho. I’m putting these back on a different keyboard as new ones are arriving today
I regret modding mine sm it has hella issues now
Great video tho
Ahh shi man :(( how long did you have it before it played up?
😢
@SpecBench i got it like about a month ago now and it has been acting up since last week :/ i have to recalibrate the keys every day, the W key is also very sticky i’m guessing because of the factory lubing… idk what ima do with it now xD
You think that’s down to the modding or just the kb in general?
noti