Good video. It looks pretty straight forward. I may return and look for your video on setting the codes but the actually mounting of the lock looks alright.
Thank you! After a year of not being able to use the keyless entry I decided to reinstall. Same results with the clicking. After watching you video I rehandled the lock and it works. So happy
The bolt keeps getting hung up and won’t close smoothly, it’s nothing to do with the plate, it’s like a mechanism on the inside is catching, any suggestions?
I have done the handing thing a million times and it still clicks. When I turn with key or interior lock knob it turns smooth. But when it turns from app or keypad it clicks. Any suggestions?
After i install the skeleton the lock gets too hard to open/ close unless I loosen it quite a bit. Works smoothly without the skeleton or the screws very loose. Any idea why this happens and how to solve?
Great question so on the deadbolt there is a way to extend the lock. You would push down on the slides and pull. It should make the deadbolt longer and fit into hole. I apologize I don't have a video on that
When I try to set up Bluetooth, it says yo push button A. There is a button A ,but there is nothing behind the button. So does anyone know how to setup Bluetooth?
I installed my aura lock and it works but it makes loud clicking noises. Is that normal? And when I try to lock or unlock using the app it usually shows it as “jammed”. Why is that? Thanks
My aura wont work i spent hours trying to make it work and is not working is my second lock i took the first one back thinking it was factory defective and im having the same issues even after watching your videos.
@@TheSmartHomeHelper so i installed the lock just like you show in the video but the lock is not moving after i place the battery in the lock no noise or nothing is my second lock
Hey Fredy, sorry to hear that is what I'd start with is reseting the lock which you have done. The other thing I might look at is to see if your phone is connecting to other things with bluetooth okay. I'm sorry I can't be more help.
How to connect to Bluetooth Video: ua-cam.com/video/9j_QPj4iIc0/v-deo.html
One of the best instructional videos for the first timer. Thank you so much.
Thank you for your comment means a lot!!!
So much better than the paper instructions AND the Kwikset Aura 12+minute video. This 60 yr old woman with arthritis did it with your help! Thanks!
Glad it was helpful! That is the best comment I have seen in a long time!!!
Same results with the clicking. After watching you video I rehandled the lock and it works. You are the best!
Thank you for the comment!!
Thank you for this! I moved and took my lock with me and the door hand was the opposite side. I couldn’t find a video about re-handing. Perfect video.
Glad it helped! And thank you for the comment!
Good video. It looks pretty straight forward. I may return and look for your video on setting the codes but the actually mounting of the lock looks alright.
Thanks for the comment! I try to make the videos quick with no fluff so thank you!
I was able to set this up by myself with no hiccups! Thanks!
So happy I could help!
Thank you!!!! This was a great video. I’m going to go tackle this now!
Glad it was helpful!
Thank you! After a year of not being able to use the keyless entry I decided to reinstall. Same results with the clicking. After watching you video I rehandled the lock and it works. So happy
Glad it helped! And I know the rehanding of the lock can be tricky and I don't think there is anything in the instructions about it.
How can I get a fancy board to learn how to change locks? I think it’s really cool!!
The bolt keeps getting hung up and won’t close smoothly, it’s nothing to do with the plate, it’s like a mechanism on the inside is catching, any suggestions?
Try this ua-cam.com/video/-bwwVqH9hBs/v-deo.html
I can't get the wires to sit in the housing nicely without affecting the lock, any advice? Thank you for a great video!
I would try to push the wires in if you can and thank you for the comment!
@@TheSmartHomeHelper I will try that once i get back home, thank you so much for the incredibly fast response!
@@TheSmartHomeHelper you are a LEGEND!!! It worked along with the rehabbing. I can’t thank you enough!!!
Thank u very much! You’re God sent😊
Glad it helped!
Thanks for the video, I have a kwikset deadbolt do I have to install this locks deadbolt or can I just add the lock to the existing one?
Nope you can use same deadbolt on most
@@TheSmartHomeHelper that worked thanks. Liking the lock so far
I have done the handing thing a million times and it still clicks. When I turn with key or interior lock knob it turns smooth. But when it turns from app or keypad it clicks. Any suggestions?
Yes so I would try loosning the screws and also looking to if the lock has any give.
Thanks for the video. Much nicer than reading a manual!
Glad I could help Todd! Thanks for commenting!
After i install the skeleton the lock gets too hard to open/ close unless I loosen it quite a bit. Works smoothly without the skeleton or the screws very loose. Any idea why this happens and how to solve?
I've seen using a screwdriver can do this sometimes. I think in the manual they say not to use a powerdrill so I'd do it by hand if you can.
Love the steps. Thank you
You are so welcome! Thank you so much for the comment! Means a lot!!
Great video. Very helpful.
Glad it was helpful! Thanks for comment!
I've noticed after 2 years the inside is loose how to I tighten it from moving ?
If take of the back plate and tighten those screws that are visible should help
Thanks for the video 👍🏽
Any time!
I have one like that but mine did not work its says jamed. I think is a factory defective should i try to return it and get new one
It could be, I might try rehanding the lock and how is the door does it close all the way sometimes the door and the weather play a factor.
If those don't work could be the lock
Is the keypad supposed to light up or not? Mine don't light up at all
It should light up! Might check batteries or the cord connected well
Mine is nos lighiting wither did you do something to make it work?
that is called a tutorial 100 likes
Thank you!!
"i would fully extend it" what does that mean and how?
Great question so on the deadbolt there is a way to extend the lock. You would push down on the slides and pull. It should make the deadbolt longer and fit into hole. I apologize I don't have a video on that
When I try to set up Bluetooth, it says yo push button A. There is a button A ,but there is nothing behind the button. So does anyone know how to setup Bluetooth?
I might try this before you attempt a sync again: ua-cam.com/video/xdTrhksTvow/v-deo.html
You're awesome dude. I build I don't do Bluetooth locks
Thanks James!
I installed my aura lock and it works but it makes loud clicking noises. Is that normal? And when I try to lock or unlock using the app it usually shows it as “jammed”. Why is that? Thanks
Two thing to try here one rehanding the lock and the other I would try is to make sure and see if the deadbolt is going in smoothly
Here is the video on ua-cam.com/video/-bwwVqH9hBs/v-deo.html
You may need to widen the whole or check to see if the door is not aligning right
mines locks with the code but unlocks by just pressing the lock button no code, should i rehand it? please help
Yes, I would rehand and if that does not work I would try reseting it
THANK YOU! I wish with was in the manual!
Thanks for the comment David!! Glad I could help you out!
The dead bolt does not retract all the way. Help!!!
ua-cam.com/video/-bwwVqH9hBs/v-deo.html
How to change left hand to right hand door ?
Here is how ua-cam.com/video/-bwwVqH9hBs/v-deo.html
My aura wont work i spent hours trying to make it work and is not working is my second lock i took the first one back thinking it was factory defective and im having the same issues even after watching your videos.
Hey Pablo, sorry to hear that and is it the syncing where u are seeing issues or what part in particular?
@@TheSmartHomeHelper so i installed the lock just like you show in the video but the lock is not moving after i place the battery in the lock no noise or nothing is my second lock
@@TheSmartHomeHelper i just try again i updated the firmware and now is saying is Jammed any idea what it could be?
How do you remove the skeleton?
You can normally put it right out. Just focus on the metal part.
Thanks soo much!!
Glad I could help!
Mine won’t connect to Bluetooth, tried multiple times to reset and nothing
Hey Fredy, sorry to hear that is what I'd start with is reseting the lock which you have done. The other thing I might look at is to see if your phone is connecting to other things with bluetooth okay. I'm sorry I can't be more help.
Thank U!!!!
Happy to help!!
You don’t talk anything about Bluetooth?
This should help you ua-cam.com/video/9j_QPj4iIc0/v-deo.html
How does one set up the password aspect?
Like a master code? I would suggest downloading the app and syncing to phone. Let me know if that helped answer your question.
Need code setup
ua-cam.com/video/KGYWjcAAfBU/v-deo.html
didnt come with round hole adaptor sleeve for deadbolt for steel/fiberglass doors have to call them for it what bullshit
Sorry hear that Tom!