Excellent video! I bought a used 2015 Zuma 125 that conks out after you start it if you don't keep it rev'd and lately it's taking more than 15 minutes to "warm up" even in 80 degree weather. I think this will do the trick; plus come in useful when I take this bike from 1000 ft elevation up to mile+ elevations on an upcoming trip! This looks like the most efficient and best price solution on the market for EFI tuning. Sold!
Installed today, after having it around for months. Install was 100% correct to my model (2017 Zuma 50 FX) and could not have been easier. Grounded directly to battery. Immediate results are +3 MPH top end on a flat and a + 6Downhill up to 47 MPH.
Finish the stock GET motor EFI Matt and make a video about it. My 2019 Ruckus only has 313 miles on it and I'm almost maxed out on upgrades. Doing MET gears over winter for next spring and front drum hub from you guys so I can run aftermarket wheels. Want to see how well the GET EFI performs
Yes. It’s there to protect your engine. Any time you add performance you decrease the reliability. With that said. The rpm limiter from the factory is very very low. It’s killing its potential in a major way. More power=more risk. Stock = no risk. You decide. But I will say the valves float before a issue. Never seen a engine go bad from the rev delete…. Yet
Please I need help. I want to max out everything I can on my 2011 125 zuma but I don't know where to start or where to look. Looking to max out top end speed and torque. Not worried about fuel consumption but longevity of motor.
Looks nice but a little confusing since you are installing this on an already modified scooter. Do you have a similar video for an install on a stock Yamaha 50cc Zuma?
Could you do a video on the Yamaha Zuma that most of us have in the market not just the people that are wanting to pop Willie's actually have a 2012 Zuma 50cc that's stock, will this equipment help my scooter you said it would would you do a video comparing relativity to a stock Zuma thanks
Unfortunately no :-( this is a completely different unit. I’m always trying to improve.... kind of like camera/computers, there is always the next best thing
Hey! Love the channel! I’ve been wanting to buy your tuner for my 2012 Zuma 125. The only thing holding me back is finding a decent AFR gauge. Do have a good recommendation?
I couldn't find the answer in the comments, so can you tell me the realistic top speed of your 76cc scooter with the full kit on a FLAT road ? Thanks !
Similar. The power commander is only a fuel tuner. The beast mode tuner is a fuel tuner and rev limiter delete. Also the power commander has limited adjustments. Resulting in lack of function for a big bore kit.
Hi your beast mode tuner is awesome really looking forward to buying a few one for my roguester50 and if I could use it on a2023 Yamaha 125 Zuma And I have a question ⁉️ can I use it on my 2023 Yamaha 125 Zuma?plz thank you ✌️
I wouldn't recommend any Chinese scooter. The quality is terrible and you will spend more on repairs than you would just buying an Italian, Japanese, or Taiwanese scooter.
@@RollingWrench Top speed is not so much my concern. I'm maxing 78,mph on the limiter. I'm more interested in fuel enrichment. I know the new 2019-2020 pcx/ADV have shorter gearing so they can use the extra RPMs.
Actually I just lowered the price to $175 for the cyber Monday sale :-) snag one up! www.rollingwrenchdenver.com/products/honda-ruckus-plug-play-performance-cdi-coil-combo
Will this work on 2005 Yamaha Zuma yw50 two stroke? How much more h.p. do you think it may add? I put a 70cc malossi big bore kit? Also is there anything you recommend to do to make it as fast as possible along with this if it would work? Sincerely thank you!
it's a shame..you don't reply to comment/questions I was wondering about, very selective. and it seems every comment has an acronym in it. should I or should I not subscribe? I got a 09 zuma 125, no mods & luvin it.
On your website you have the Honda Ruckus assembled performance CVT kit listed in the Honda Metropolitan CVT section. I know all of the variator/clutch/etc pieces are identical, but what about the belt? The kit says it comes with a polini belt for a Ruckus, but if the Metro has a shorter CVT case than the Ruckus, wouldn’t this belt not work? If it doesn’t, can you provide a Polini belt for a Metro instead?
Rolling Wrench Scooter, Motorcycle, & ATV how would you know to send the Metro belt? I didn’t see a notes section when checking out. Then again I suppose it’s not like hundreds of those get ordered a day
@@RollingWrench Hi and thanks for the reply! Are you shipping it with some pre-seted configuration for a completely stock scooter or user has to go step by step and configure all the fuel values for all the range?
Excellent video! I bought a used 2015 Zuma 125 that conks out after you start it if you don't keep it rev'd and lately it's taking more than 15 minutes to "warm up" even in 80 degree weather. I think this will do the trick; plus come in useful when I take this bike from 1000 ft elevation up to mile+ elevations on an upcoming trip! This looks like the most efficient and best price solution on the market for EFI tuning. Sold!
Installed today, after having it around for months. Install was 100% correct to my model (2017 Zuma 50 FX) and could not have been easier. Grounded directly to battery. Immediate results are +3 MPH top end on a flat and a + 6Downhill up to 47 MPH.
bought mine, it's on route TOTALLY STOKED!
Thanks for the support 🙏🏻💯. You will love it
Why this item can't be ship to Dominica ?
what’s the best tune i could do for my yamaha vino 50cc
Looking to order for a pretuned 70cc , Need a link or where to order plz an thanks
Will this work on my Yamaha zuma 50fx
Vitacci tank efi 200cc work?????
Finish the stock GET motor EFI Matt and make a video about it. My 2019 Ruckus only has 313 miles on it and I'm almost maxed out on upgrades. Doing MET gears over winter for next spring and front drum hub from you guys so I can run aftermarket wheels. Want to see how well the GET EFI performs
Michael C I definitely have that in the works. Should be about 3 weeks :-) I appreciate you dude !
The speed limiter must be there for a reason no? Will this worn out prematurely my engine, thanks.
Yes. It’s there to protect your engine. Any time you add performance you decrease the reliability. With that said. The rpm limiter from the factory is very very low. It’s killing its potential in a major way. More power=more risk. Stock = no risk. You decide. But I will say the valves float before a issue. Never seen a engine go bad from the rev delete…. Yet
Where can i order the parts of zuma bws 100 like headlights?
Can I use this on my 2010 Zuma 50? It’s been sitting in my garage but a bit more power would probably help me pull it out on the road again!
Please I need help. I want to max out everything I can on my 2011 125 zuma but I don't know where to start or where to look. Looking to max out top end speed and torque. Not worried about fuel consumption but longevity of motor.
What is the safe max rpm for a zuma 125 no bbk?
9k in my opinion. They are pretty dang bullet proof engines
Looks nice but a little confusing since you are installing this on an already modified scooter. Do you have a similar video for an install on a stock Yamaha 50cc Zuma?
Yes. But on a 125cc click the listing the video is there
This video isn't for carburated models is it?
No it’s not
Could you do a video on the Yamaha Zuma that most of us have in the market not just the people that are wanting to pop Willie's actually have a 2012 Zuma 50cc that's stock, will this equipment help my scooter you said it would would you do a video comparing relativity to a stock Zuma thanks
do this work on a 2024 zuma 125cc
This come with model specific wiring/directions?
This video is the only instructions
Dude can i add that "rev limiter delete" to my beast mode tuner mine is the previous model.
Unfortunately no :-( this is a completely different unit. I’m always trying to improve.... kind of like camera/computers, there is always the next best thing
That works also on yamaha zuma 50fx?
I’m curious as well
Will this work if i only plug in the fuel injector part and dont plug in the rev limiter part?
Yes
@@RollingWrench Thanks, man. Ordered one Saturday, excited to get it.
men can you do the AEROX 4 stroke euro 3 and 4 PLEASE
What exhaust is on that bike?
Amazing product. thanks
Thanks for the support Don!
Hey! Love the channel! I’ve been wanting to buy your tuner for my 2012 Zuma 125. The only thing holding me back is finding a decent AFR gauge. Do have a good recommendation?
Do I even need a AFR gauge for this tuner? How would I know if it’s the proper ratio while tuning?
@O G Hello! I ended up moving and selling my Zuma. Thanks for checking in all these months later
I couldn't find the answer in the comments, so can you tell me the realistic top speed of your 76cc scooter with the full kit on a FLAT road ? Thanks !
It depends on your altitude and weight. But a safe number is 50mph
Hi, what about a Yamaha Delight 125cc. Can this work ? Or do you have something else that works for that one ? Best regards from Norway.
Do a zuma 125
Is this the fame as what a Power Commander does?
Similar. The power commander is only a fuel tuner. The beast mode tuner is a fuel tuner and rev limiter delete. Also the power commander has limited adjustments. Resulting in lack of function for a big bore kit.
@@RollingWrench I have a 2009 Zuma 125,i should be good with this, right?
@@dattran6372 yes, definitely:-)
will that work on the 2022 bws 200 efi
No :-(
They do amazing work check their parts out.
will this work on a Yamaha Jog 50-90cc or Honda Dio AF18
No since it’s not EFI
Hi your beast mode tuner is awesome really looking forward to buying a few one for my roguester50 and if I could use it on a2023 Yamaha 125 Zuma
And I have a question ⁉️ can I use it on my 2023 Yamaha 125 Zuma?plz thank you ✌️
It won’t work on the 2023. It has the new blue core motor. Different then the rest
Do you recommend the Icebear maddog? I feel like I hear lots of bad stuff about them
I wouldn't recommend any Chinese scooter. The quality is terrible and you will spend more on repairs than you would just buying an Italian, Japanese, or Taiwanese scooter.
I like this 🤗
Does this work on the newer zuma 125
Not yet, but it will. Email me if you want to beta test it.
@@RollingWrench did u make them compatible for the 2020 zuma 125 yet?
Will this work on the new blue core motor on the 2022 zuma 125? I’m already getting 64mph stock.
I’m not sure ??? Wanna beta test?
Will this work on a Yamaha C3? I need my C3 to do 55, not 35-40, lol.
Oh ya! My c3 does 67mph with this and a big bore
Is this install all the same for a 2015 Yamaha Zuma yw50f water-cooled??
Ya same install
I wish to purchase one for my 15 Yamaha Zuma yw50f 4t
Hey buddy, will this work on a yamaha cygnus 125?, same engine as bws and the zuma so I hope so😛
I’m not 💯 sure. It’s worth a try. If not I can refund you minus the shipping
You would need to let me know since this would be a beta test
PLEASE come out with one for a PCX!!! lol I'll order the first one!!
I’ll work on it. What is your current top speed?
@@RollingWrench Top speed is not so much my concern. I'm maxing 78,mph on the limiter. I'm more interested in fuel enrichment. I know the new 2019-2020 pcx/ADV have shorter gearing so they can use the extra RPMs.
ConElite if you are not worried about the top speed I think I have you covered. Email me if you want to beta test a tuner.
@@RollingWrench Email Sent.
how come on your other vid. description link the price is $175,but on this vid. when you go on description link it’s $189
My supplier raised the price, so I raised the price :-( I will do a sale here shortly
Actually I just lowered the price to $175 for the cyber Monday sale :-) snag one up!
www.rollingwrenchdenver.com/products/honda-ruckus-plug-play-performance-cdi-coil-combo
Are These On eBay
No, only on our website. eBay is a business owners enemy. Fees
Thanks Hey Brother Any Way You Can Help Me Make A Order Been Trying To ?
Hey ( Rolling Wrench ) Just Got My Tuner Yesterday For My Stock C3 Got It All Hooked Up So Easy Can You Tell Me What Is The Best To Run A Stock C3 ???
Will this work on 2005 Yamaha Zuma yw50 two stroke? How much more h.p. do you think it may add? I put a 70cc malossi big bore kit? Also is there anything you recommend to do to make it as fast as possible along with this if it would work? Sincerely thank you!
Would this work with the new 2022 zuma blue core
it's a shame..you don't reply to comment/questions I was wondering about, very selective.
and it seems every comment has an acronym in it.
should I or should I not subscribe?
I got a 09 zuma 125, no mods & luvin it.
I’m here. What’s your question ?
i really need one of these send to denmark :) Please write to me
Will this work on a 2005 two stroke zuma
Won’t this is for fuel injected scooter (4t in other term/) 2013-2019 model of Zuma/Bws.
No Way I Got To Get Everything You Have For The C3
What is the stock rev limit on a 17 zuma 50?
8850
Can I put an exhaust on my zuma 125 and not need to get this tuner or do I need it
Exhaust will probably be fine. But if you do intake and exhaust it would be a good idea to tune it
What No Way
EMPE pa more haha
First like
On your website you have the Honda Ruckus assembled performance CVT kit listed in the Honda Metropolitan CVT section.
I know all of the variator/clutch/etc pieces are identical, but what about the belt?
The kit says it comes with a polini belt for a Ruckus, but if the Metro has a shorter CVT case than the Ruckus, wouldn’t this belt not work? If it doesn’t, can you provide a Polini belt for a Metro instead?
Hey, no problem. I can send you a metro belt in it’s place
Rolling Wrench Scooter, Motorcycle, & ATV how would you know to send the Metro belt? I didn’t see a notes section when checking out. Then again I suppose it’s not like hundreds of those get ordered a day
Degenerate just email us with the order number after checkout.
Rolling Wrench Scooter, Motorcycle, & ATV will do, ordering it now. Thank you!
will this work on the vino 125?
Yes, same as zuma
Will this work on a 2021 Zuma 125?
Did you find a kit for your bike?
@@joelstinson3316 nope :(
Try drowsports
Let me know how it goes I wanna try it
Will this work for a Yamaha vino 50xc
It will work on the Vino 50 if it’s efi
Will this work for a Yamaha zuma 2008 prebug 50cc? I own one want to make it little quicker for main roads
Prebug has a carburetor so no
Does this work on the 2023 Zuma 125?
Will this work on European Cygnus X 125 2008?
Yea
@@RollingWrench Hi and thanks for the reply! Are you shipping it with some pre-seted configuration for a completely stock scooter or user has to go step by step and configure all the fuel values for all the range?
Will this work on 2020 zuma 125?