Cool - what are the two indentations on the front of the front bumper there? Are those the "drill here to make holes in your bumper" holes? Just got into a GT, and will need to find an option. Looks like the format you've got here (that would mount on a splitter) won't work in my case. Will keep looking. Great, to-the-point video. Cheers!
Curious......what was your preference to place the plate on the passenger side of the front end? I plan to mount my on the driver side (the business side), wondered why people pick the passenger side?
Here in Colorado the bottom edge of the plate must be >12" from pavement and the face must be perpendicular to pavement (throwing it on the dash won't work). There may be similar rules in other states.
are the bolts that are used to mount the plate to the sto n sho stainless (the ones that come with it)? if not I will have to buy stainless after it comes in I guess....
I would use stickers numbers as long as the numbers match the rear plate what the big deal police have to follow to read your plates ,and hit you head on to read the front one ,plus corvettes ran around for years with a non plate that read USA ONE never seen them get pulled over
We need a front plate in Ohio (at least until July 2020) so I got the Sto n Sho as well (for my widebody Scat) but I got the "Upper Mount" which goes on the underneath of the bumper in the center just above the adaptive cruise sensor. Holes are underneath so cant see those and the plate is in the center and thus not awkwardly off set. Also, when you mount it to the splitter the bracket hangs below it and makes it more likely to scrape on driveways etc. Check out the link below and you can see what it looks like. bigmikesperformanceparts.com/2015-2019-dodge-challenger-hellcat-and-demon-2019-wide-body-scat-pack-upper-mount-sns1e/
Links to purchase the STO N SHO license plate holder from Amazon are in the video description.
Thanks for the tutorial! Gonna try mounting this to my new Chrysler 300c for this year! Love the color of your car!
Cool - what are the two indentations on the front of the front bumper there? Are those the "drill here to make holes in your bumper" holes? Just got into a GT, and will need to find an option. Looks like the format you've got here (that would mount on a splitter) won't work in my case. Will keep looking. Great, to-the-point video. Cheers!
Its too low, you will scrape and bend the plate on going up a low ramp.
Looks funny off to one side but, I get it, what's the price and best place to get it??
Curious......what was your preference to place the plate on the passenger side of the front end? I plan to mount my on the driver side (the business side), wondered why people pick the passenger side?
So copa cant see it as easily when they drive by
Here in Colorado the bottom edge of the plate must be >12" from pavement and the face must be perpendicular to pavement (throwing it on the dash won't work). There may be similar rules in other states.
are the bolts that are used to mount the plate to the sto n sho stainless (the ones that come with it)? if not I will have to buy stainless after it comes in I guess....
What about if you have a extended front splitter? Can you still use this?
cool , i see many cars here in texas not really riding witht he front plates, i guess there kinda more leniant about it here
Same in MO, it really is luck of the draw when a cop sees it. And the area
I have to put it in the middle because i would go insane if it wasnt in the center because i think its ugly if its offset
Should have had the driving up the ramps, it's the hardest part or registered a car in Alberta.
I would use stickers numbers as long as the numbers match the rear plate what the big deal police have to follow to read your plates ,and hit you head on to read the front one ,plus corvettes ran around for years with a non plate that read USA ONE never seen them get pulled over
Why not a sticker plate problem solved
We need a front plate in Ohio (at least until July 2020) so I got the Sto n Sho as well (for my widebody Scat) but I got the "Upper Mount" which goes on the underneath of the bumper in the center just above the adaptive cruise sensor. Holes are underneath so cant see those and the plate is in the center and thus not awkwardly off set. Also, when you mount it to the splitter the bracket hangs below it and makes it more likely to scrape on driveways etc. Check out the link below and you can see what it looks like. bigmikesperformanceparts.com/2015-2019-dodge-challenger-hellcat-and-demon-2019-wide-body-scat-pack-upper-mount-sns1e/
That's the one I originally ordered, it only works on the hellcat/demon/widebody scat bumper.
also easier access for the initial install and for when you want to remove it at car shows etc.
Oh ok. I didn't notice that. Hopefully they will get rid of the front plate rule for you as well sometime soon!:)
No offense but looks kind of crooked.
Because of the adaptive Cruise control in the middle of the lower grille
It’s outrageous that manufacturers don’t include a front license mounting bracket that doesn’t require DRILLING THROUGH THE FROMT BUMPER. Ridiculous.
You still have to drill ugh 🤦♂️
That is wrong.😄