ADD-W1 V3.3 Oil Catch Can Installed on the Elantra N!
Вставка
- Опубліковано 15 вер 2024
- Welcome back! Today we are installing the ADD-w1 catch can on the Nlantra! Links will be below! Thank you for all your support🙏🏽
The ADD W1 V3.3 Direct Bolt-On Catch Can Kit comes with everything you need for an easy installation!
It will select the best possible suction source for continuous cleaning in idle or wide open throttle driving conditions.
The V3.3 oil catch can work if the vehicle is in idle or in acceleration (Wide open throttle / WOT) and is more efficient than a single oil catch can.
U.S. Patent Number: D870,786 S
Discount link: addw1.refr.cc/...
ADD W1 V3.3 Catch Can Kit For Elantra N
www.addw1.com/...
Other Elantra N Products
www.addw1.com/...
Elantra Blow Off Valve BOV Kits
www.addw1.com/...
ADD W1™ Official Site ADD W1™ Official Site
www.addw1.com/
Nice to see another quality catch can available for our cars. I'm quite satisfied with my one by SXTH but this is an appealing option as well.
i was exacly waiting for this videos from you guys :) thanks so much .. :)
Thank you for those kind words! 🙏🏽
Have you guys done a dyno yet? Thank you for the new vid!
No dyno yet brotha. Not sure if we really plan too to be honest though
At the air breather did you buy a connector ? It looks like it don’t flush really well.
This is what comes with the add w-1 kit. It’s tighten in between the fuel pump and plastic casing but it fits and it’s snug. You can always remove the breather and run a line back into the intake with a tee fitting.
How’s the carbon fiber lip kit and side skirts holding up?
So far so good! All the pieces are holding up really well. Only issue we had so far was the front lip chipped but that was all on our end. Nothing crazy
Was there any issue having this delivered to you guys since you’re also here in Cali? Another CC maker has restrictions to Cali residents, so, curious if the same holds true for those wanting the ADD W1 that also live in this state.
Looks great tho and the 2nd suction source is additional awesome.✌🏽
Nope 0 issues with shipping. Products actually arrived extremely quick since they are local as well.
@@KDMStation ahhhhh k, maybe that’s the reason. If they’re stationed here already then yeah, can’t be any legit reason to restrict sales.🤘🏽 good to know!
Thnx guys!!
@@jasenrodriguez9217 of course brotha no problem.
What T fitting did you use for your breather?
I ordered the fitting from add-w1 website. I believe they have it as a 15mm tee
how many upgraded hose clamps do i need?
Depends on what set up you go with.
When I contacted them about the catchcan for the EN they asked for a pic of my engine with the cover off, our car wasn't listed and now here's one installed😋🙄🤔 That's ok, I'll be using everything from SXTH Element anyways, plus the catchcan is listed on their site for our car.
Speaking of SXTH Element, did you ever get that CEL to go away after the ECU tune. I've watched several other videos about the EN where they have the tune and no CELs at all.
We have been working with ADD W1 since Emily’s last platform. Maybe the person you emailed was unaware of us already working with them 🤗 there is a big difference between SXTH’s catch can and this one. So as great as it is to be “brand loyal” it doesn’t make sense for me to just stay loyal if I see something else that fits ours needs better.
And yes we did get it fixed. We mentioned to you before that the cel was due to an improper vin correlation between the ecu. Sxth emailed as another file and the cel went away immediately. Unfortunately since we were the first ek1 tune we had a few hiccups we had to work out to make sure the rest of the community wouldn’t have any issues ☺️
@@KDMStation I didn't know a catchcan did multiple things to fit various needs🤔😋
@@KDMStation what are the major differences between SXTH and the ADD CC? Technically speaking, I'd love to know what the differences are.
@@BecauseHYDE16 sxth can acts as a single catch can while this acts as a dual can. It’s also using two points of vacuum for additional suction of blow by.
It’s not finished what about your engine cover?
Engine cover traps more heat. No need for it.
If the engineers that designed the engine thought that they wouldn’t have designed it like that.
It’s there to keep dust out of your electronics.
That was painful to watch!
Make sure to watch the rest of the videos as well 😘
im not cheap by any mean but 300$ dollars sims to me a lot for an oil catch can
You’ll spend the same amount buying two catch cans if you decide to run dual. So this is actually priced right where it should be.
ebay has good catch cans for $20 each!
@@Wazza722 And I'm sure you don't get them in a kit with the hoses, clamps, fittings, mounting brackets, etc. And I'm sure that you get zero support if you need it. And I guarantee they don't have a specially patented baffle design like this catch can does.
You pays your money and you takes your choice. Quality standard catch cans run $170-300+ for a kit (Boomba Racing's Stage 2 and Stage 2 kits, SXTH Element Racing's kit, or the less expensive ADD W1 kit which is only two hoses) from known quality vendors - and this catch can does more than any other single (2-hose, which all the others are) catch can. If you want to do it the eBay way, totally up to you.