I think I have been looking for a video on how to make these for about four days. And you are the only person who explained it the way I needed to hear so thank you. 🎉
I Love these Vellum Matte place holders! They look great and I'm loving the script you selected for the "in the bank" on the front. Great job and thank you so much for this tutorial!!
The printers that have a problem printing on velum are the ones who load from the bottom and then flip the paper during printing. You have to use the top loading printers so it goes through the printer straight
Thank you for showing your viewers how to make these envelopes. I have seen some placeholders on Etsy that are cut very closely along all edges and rounded - there are no clear margins on any of sides if that makes sense. They are stated in Etsy as being made from vellum and 5 mil lamination. Since you are familiar with making envelopes, do you know how they can get the edges cut so that they don't show any laminated margin at all. I like the clean look of those and I have many placeholders to make so it's not financially beneficial to order so many on Etsy at this time. Thank you again for making such great videos and being so transparent on your process.
This was such perfect timing for me! I found this video this morning and half way through watching all my matt laminator pouches turned up! 🙌🏻 Three guesses what I’ll be doing this afternoon?! 💕💕
your tutorial was amazing! my only trouble is whenever i use canva i’m not able to select my measurements. did you have to buy the canva pro? i’m using my mas desktop and ipad and both don’t give me the option to use a measurement
Hi! My desk is actually a custom desk I had made by my work...I work for a furniture manufacturer. But I can give you the laminate finish www.surfacematerials.com/grey-wash-oak-matte-finish.html
No I don’t. It’s not a bad trimmer but I prefer to use mine for straight cuts. But if I ever do some diagonal cut I will for sure it because it has some nice guide lines for that
You don’t have to use the vellum. Actually the vellum is very light and thin so it’s not adding anything to the structure. But make sure to use at least the 5mm
I seem to be having a problem where the vellum is not sticking to the laminating sheets so im guessing it's my laminator. Because I followed your tutorial to a T and I keep getting that problem
I think I have been looking for a video on how to make these for about four days. And you are the only person who explained it the way I needed to hear so thank you. 🎉
Finally a tutorial in Canva! I watched 3 videos of someone cutting a placeholder after it was printed and calling it a tutorial. No ma’am!
I made a border around mine just so I would know where to cut😊 But you are the best tutorial I have found for this!
I love your "how-to" videos! Because of you, I've been making my own cash envelopes and actually enjoy it! lol Thank you for sharing!! 👍
Omg that’s amazing! I love hearing that!!!
I Love these Vellum Matte place holders! They look great and I'm loving the script you selected for the "in the bank" on the front. Great job and thank you so much for this tutorial!!
Thank you!
Thank you dear for this tutorial you are a money saver indeed ❤❤❤🎉🎉🎉.
You’re welcome 😊
The printers that have a problem printing on velum are the ones who load from the bottom and then flip the paper during printing. You have to use the top loading printers so it goes through the printer straight
Oh good to know! I have the top loading so that makes sense
I love your use of Canva to design the placeholders Desiree
Thank you! Love Canva!
I followed your video and I made my own place holders that said fully funded. Thank you SO MUCH for sharing!!!!!
Great video, thank you. And your nails!! 🥰 beautiful! 🦊💰
Thank you for showing your viewers how to make these envelopes. I have seen some placeholders on Etsy that are cut very closely along all edges and rounded - there are no clear margins on any of sides if that makes sense. They are stated in Etsy as being made from vellum and 5 mil lamination. Since you are familiar with making envelopes, do you know how they can get the edges cut so that they don't show any laminated margin at all. I like the clean look of those and I have many placeholders to make so it's not financially beneficial to order so many on Etsy at this time. Thank you again for making such great videos and being so transparent on your process.
Thank you for the video. Could you go over how you make the trackers and your cash sheets?
I am trying to figure out an easier way to make them...it's kind of an annoying process that I'm not sure I can explain very well in a video.
This is great. Just made some and I love them. Thank you!
Great video Desiree...you explained the process so well. I might give it a go 💗
Thank you for this detailed tutorial.
You are so welcome!
Love your videos! Thank you for all your knowledge! I also love your nail polish!! Any chance you remember the name and brand?
Such a great tutorial!!
Thank you 😊
I've turned on the bell cuz I love your videos.
This was such perfect timing for me! I found this video this morning and half way through watching all my matt laminator pouches turned up! 🙌🏻
Three guesses what I’ll be doing this afternoon?! 💕💕
That's awesome! Hope you were able to make a bunch!
Great video! Thank you for that great tutorial! 😊
You are so welcome!
AH Thank you for this helpful tutorial! I want to try this, and was googling for info. Your video popped up and helped so much :)
Yay! So happy you were able to find this🤗
Great video. Thank you for sharing
Thanks for watching!
amazing video thank you
Great video! Thank you for sharing!
Very nice! Thanks for showing this!💚
Thanks for watching!
Great video!! I’m new here, but do you have a video on how you made the envelopes?
Yes I do!nua-cam.com/video/OAv8yOyh4OI/v-deo.htmlsi=A32rYeK441RTGSMS
your tutorial was amazing! my only trouble is whenever i use canva i’m not able to select my measurements. did you have to buy the canva pro? i’m using my mas desktop and ipad and both don’t give me the option to use a measurement
I love your videos! So easy for me to follow 😊
And I love your binder. Where did you get it?
Thanks much! Great video!!!
You're welcome!
Thank you for sharing this
Could you use vellum tracing paper to be even thinner since you're essentially laminating 8mil.
Hi! Are you able to share the link for your table? I love the grey! ❤
Hi! My desk is actually a custom desk I had made by my work...I work for a furniture manufacturer. But I can give you the laminate finish www.surfacematerials.com/grey-wash-oak-matte-finish.html
Great video 💗🌷
Thank you 🤗
Great Video!! 🦋💜🦋
Thank you! 🤗
Do you use the paper trimmer on your laminator?
No I don’t. It’s not a bad trimmer but I prefer to use mine for straight cuts. But if I ever do some diagonal cut I will for sure it because it has some nice guide lines for that
Hey what type of ink do you buy ?
Desiree, where is your binder from? Another awesome video!
They are actually samples. I plan on opening a shop where I will sell the binders that I like🤗
@@Happy2planwithDesireeyay! I’ll definitely wait until you open shop to purchase my own 😍 wallet from you!
awesome, love this
Do you have to use the vellum? Would the pouches be sturdy enough on their own
You don’t have to use the vellum. Actually the vellum is very light and thin so it’s not adding anything to the structure. But make sure to use at least the 5mm
@@Happy2planwithDesiree thank you!!!! So the vellum is just for the frosty look?
I seem to be having a problem where the vellum is not sticking to the laminating sheets so im guessing it's my laminator. Because I followed your tutorial to a T and I keep getting that problem
Oh ya it might be your laminator. And you use the 5mm setting? Maybe it’s not getting hot enough
@@Happy2planwithDesiree mine doesn't have different settings 😩
❤
😊👍🏾💰💚